continuous gas analysis Articles

  • Headspace gas analysis video

    Why does headspace gas need to be measured? To check the continuity and quality of the gas supply to the packing machine, the efficiency of the flush/vacuum cycle and the integrity of the pack seal. To optimise gas usage and save costs. To meet customer headspace gas quality standards. ...


    By Systech Instruments Ltd

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics, Inc.

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Gas Analysis Improves Container Safety - Case study

    Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20 percent of all containers and this level of contamination is now accepted as commonplace. ...


    By Gasmet Technologies Oy

  • Analysis of key trends and drivers in greenhouse gas emissions in the EU between 1990 and 2014

    1 GHG emissions in 2014 compared to 2013 1.1 Summary (last year) Total GHG emissions (excluding LULUCF) decreased by 185 million tonnes, or 4.1% compared to 20132 to reach their lowest level in 2014 (4282 Mt CO2 eq.). This significant decrease in emissions in 2014 came with an increase in GDP of 1.4 %. This resulted in a lower GHG-emission intensity of GDP in the EU ...

  • Modeling Analysis of Fuel Sprays

    Current engine development processes in which computations play an important role have sought for numerical models which can accurately represent phenomena in spray combustion. The authors have developed original sub-models taking into account the effects of extensive spray combustion phenomena including nozzle cavitation, droplet breakup behavior, multi-component evaporation process, spray-wall ...


    By HORIBA Europe GmbH

  • Continuous monitoring of moisture present inside a process chamber

    Problem Statement Moisture inside a process chamber is a big silent killer during wafer production. When production yield goes down, it is hard to pinpoint the source of the problem. Most of the time wafers need to be sent to labs for analysis, while production is stopped. If the problem is related to a high level of moisture inside the reactor, there are several factors that can cause ...


    By CIC Photonics, Inc.

  • Investigation of the efficiency of a tubular continuous-flow photoreactor with supported titanium dioxide nanoparticles in the removal of 4-nitrophenol: operational parameters, kinetics analysis and mineralization studies

    In this study, to investigate the application of heterogeneous photocatalysis in the removal of organic contaminants from aqueous media a novel tubular continuous-flow photoreactor with supported TiO2-P25 on glass plates was designed and constructed. The photoreactor comprises six quartz tubes and a UV lamp which was placed in the center of the quartz tubes. 4-nitrophenol (4-NP) as a most ...


    By IWA Publishing

  • What is the Difference between a gas analyser and a gas monitor?

    Technically, there does not have to be any difference at all. However, semantically, “analysis” might suggest something more scientific with higher precision and better performance than a simple “monitor” which possibly suggests a more indicative output where precision is of less importance. With that said, the two words “analyser” and “monitor” are ...


    By Opsis AB

  • What is the Difference between a gas analyser and a gas monitor?

    Technically, there does not have to be any difference at all. However, semantically, “analysis” might suggest something more scientific with higher precision and better performance than a simple “monitor” which possibly suggests a more indicative output where precision is of less importance. With that said, the two words “analyser” and “monitor” are ...


    By Opsis AB

  • What is the difference between a gas analyser and a gas monitor?

    Technically, there does not have to be any difference at all. However, semantically, “analysis” might suggest something more scientific with higher precision and better performance than a simple “monitor” which possibly suggests a more indicative output where precision is of less importance. ...


    By Opsis AB

  • Leveraging Emergency Preparedness to Align with Business Continuity Planning

    Utilities need to ensure that critical systems and processes can be restored in a timely manner during a crisis, with reduced negative operational and financial impacts. The marcus evans Business Continuity & Organizational Resilience for Utilities Conference will address major topics such as preparing for major storms and natural disasters, business continuity planning, critical ...


    By Marcus Evans

  • How Does a Gas Analyser Work?

    Whatever you want to detect, you need to identify a property of the object that is easy-enough to measure. When it comes to monitoring and analysis of gaseous species (atoms or more commonly molecules), it turns out that it often is possible to utilize the optical properties of the gas. You need a light source, a light detector, and a characteristic behaviour of the gaseous species in question ...


    By Opsis AB

  • How the post-flint effect could continue to affect industry

    This post originally appeared on Enablon Insights as part of a three-part series, Between Flint and a Hard Place. The first ...

  • Carbon dioxide gas case study

    Application Moisture] is measured in carbon dioxide gas pipelines and processing plants. Problem The presence of moisture in carbon dioxide gas promotes corrosion. Perhaps more significant is the fact that moisture will readily form ice when pressure is reduced. The ice can readily freeze up pressure regulators, valves, and orifice plates causing a loss of flow and even ice ...

  • Assessment of global megatrends — an update Global megatrend 5: Continued economic growth?

    Assessment of global megatrends — an update Europe is bound to the rest of the world through an enormous number of systems — environmental, economic, social, political and others. Such networks enable complex flows of materials and ideas across the globe, producing uncertain feedbacks and knock-on effects over time. Greenhouse gas emissions in Europe today can affect the ...

  • The importance of maintaining your fixed gas analyser

    Plant technicians rigorously check for contaminates within the digester and ensure that the performance is optimised but maintaining the gas analyser monitoring the whole process is often overlooked.  Many analysers are used in harsh and potentially explosive environments and so it is of paramount importance that the operation runs smoothly and safely. With simple maintenance of your ...


    By Geotech

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you