gas testing service Articles

  • Gas turbine compliance emissions test case study

    CKwas retained by Lake Road Generating Company, LP (Lake Road) to conduct a compliance emissions test program on three combustion turbine and heat recovery steam generators (CT/HRSG). The purpose of this program is to demonstrate that emissions from the CT/HRSGs are within the emission limits specified in the operating permit issued by the Connecticut Department of Environmental Protection ...


    By CK Environmental, Inc.

  • FTIR meets Fire Testing needs for toxic gas analysis - Case study

    One of the most dangerous aspects of a fire is the toxic gases that can arise from the process of combustion. To save lives and develop safer materials for airplanes, trains, and buildings, it is vital to identify and measure the gases that are released when products and materials are burning. The BASF Fire Technology Laboratory in Ludwigshafen, Germany, conducts fire testing on materials to ...


    By Gasmet Technologies Oy

  • Food packaging designs tested using Systech Illinois gas analysis equipment - case study

    At the Loughry Campus, Systech Illinois' headspace gas analyzer and oxygen permeation analyzer are used in the testing of food packaging. Located in Cookstown, County Tyrone, Northern Ireland, Loughry Campus offers educational and training programmes in all elements of Food Management. Students have access to a purpose built food technology centre and laboratories where they can develop ...


    By Systech Instruments Ltd

  • Revolutionary Filtration Put To The Test

    There are many cool aspects of my job, not the least of which is learning — and sometimes even breaking news — about the latest technologies in oil and gas. When I heard from Mike Dejak, executive VP of Eco-Tec, that the company's new technology could "revolutionize filtration" for the produced water market, I was anxious to learn more about it. However, I was also duty-bound to you, ...


    By Eco-Tec Inc.

  • Materials Testing Laboratory Provides Cutting Edge Contamination Testing Solutions

    Many industries have extremely tight parameters for any contamination of parts that are used in their manufacturing process.  Testing for contamination and quality control is an integral part of these companies’ final products. At EMSL Analytical, the Materials Testing Laboratory has extensive experience in providing highly detailed analytical services to assist manufacturers in ...


    By EMSL Analytical, Inc.

  • `Testing VOC Evaporation Losses from Floating Roof Tank Turnover,` published in Oil and Gas Journal, December 10, 2001

    Abstract Air emissions from floating roof tanks have been well characterized and documented by the U.S. Environmental Protection Agency (EPA). The estimation methods have been revised and updated throughout the years. However, an unusual aspect of air emissions from tanks with a floating roof during a tank turnover has not been addressed.  Petroleum storage tank floating roofs are ...


    By Trinity Consultants

  • An Overview of the F-Gas Regulation Proposals

    By now you should have an appreciation of F-Gas regulations and what it means to you. But in case you don’t, here’s a quick overview in relation to leak detection. Why have the F-Gas regulations come into force? Fluorinated greenhouse gases (F-Gases) are potent greenhouse gases that contribute to global warming and are sometimes referred to as High ...


    By a1-cbiss

  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • Case study - Pure oxygen injection pilot test

    Introduction: The Moccasin Bend WWTP uses pure oxygen produced by a cryogenic oxygen plant for activated sludge treatment of the influent waste stream, which consists of municipal and industrial wastes. The waste stream contains a high proportion of high strength industrial waste, which results in a typical COD loading of about 2000 mg/L, which is approximately four times the strength ...

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Nitrogen Dioxide Testing in Indoor Environments Protects Human Health

    During the winter months, when homes and businesses typically have their windows and doors closed, can result in an increase in indoor air quality (IAQ) complaints.  In addition to a lack of fresh air in many buildings during this time, problems due to gases not properly vented from heaters frequently occur.   Nitrogen oxides can be of increased concern during these cold winter ...

  • Raschig high capacity mini fixed valves FRI tested

    For mass transfer trays standard sized round and rectangular valves have been proven their industrial advantages many times. For typical applications the deck hole diameter of a standard moveable or fixed round valve is approx. 38 mm. For fouling services even larger valves in rectangular shape have been designed. Over the past years a new trend is pushing into the market: mini moveable or fixed ...


    By Raschig USA Inc.

  • Raschig high capacity mini fixed valves FRI tested

    For mass transfer trays standard sized round and rectangular valves have been proven their industrial advantages many times. For typical applications the deck hole diameter of a standard moveable or fixed round valve is approx. 38 mm. For fouling services even larger valves in rectangular shape have been designed. Over the past years a new trend is pushing into the market: mini moveable or fixed ...


    By Raschig USA Inc.

  • Gas analyzers accelerate business growth - Case study

    Transportable multi-parameter analytical instruments have been key to the growth of an analytical services company based in Elk City, Oklahoma. Great Plains Analytical Services (GAS) operates a fleet of mobile monitoring systems, providing onsite gas analysis for customers across the USA, and Gasmet FTIR analyzers have enabled the company to offer a comprehensive onsite monitoring service. CEO ...


    By Gasmet Technologies Oy

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Siemens Gas Chromatograph (GC) valve renewal program - Case Study

    Challenge At a large chemical plant located in the Gulf Coast region, the customer’s main challenges were cost of maintenance for Siemens Gas Chromatographs, lack of preventive maintenance and a shortage of trained resources to accomplish the day-to-day tasks at their plant site. With the existing economical environment, the customer was looking for a solution that could offer the ...

  • Headspace gas and oxygen permeation analysis of food packaging designs - Case Study

    Food packaging designs tested using Systech Illinois gas analysis equipment At the Loughry Campus, Systech Illinois' headspace gas analyzer and oxygen permeation analyzer are used in the testing of food packaging. Located in Cookstown, County Tyrone, Northern Ireland, Loughry Campus offers educational and training programmes in all elements of Food Management. Students have ...


    By Systech Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you