laser-based gas analysis Articles

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • Accuracy and precision analysis of chamber-based nitrous oxide gas flux estimates

    Chamber-based estimates of soil-to-atmosphere nitrous oxide (N2O) gas flux tend to underestimate actual emission rates due to inherently nonlinear time series data. In theory, this limitation can be minimized by adjusting measurement conditions to reduce nonlinearity and/or by using flux-calculation (FC) schemes that account for the so-called 'chamber effect.' The current study utilizes gas ...

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics, Inc.

  • Air pollution control using laser analysis – Case Study

    An LDS 6 analyzer monitors HF emissions during the production of hydrofluoric acid in accordance with the German Technical Instructions on Air Quality Control (TA Luft) The customer Fine chemicals and inorganic basic chemicals have been developed and produced at the Seelze chemical site in northern Germany for more than 100 years. Such a basic chemical is ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Smart combination of gas flow metering and analysis

    Published in: energie aus pflanzen Fachmagazin für Biogas, Holzenergie & NAWARO Precise biogas analysis with one analyzer instrument only Besides other factors, the annual gas production is relevant for the kind of operating authorization. So a very precise flow meter becomes a wise investment. On the farm of Christian Wilke in Grossenkneten located in the district of Oldenburg, ...


    By Binder Group GmbH

  • Comprehensive analysis of greenhouse gas emissions in Hungary

    This paper overviews the anthropogenic greenhouse gas emissions in Hungary in the period 1985–95. The emissions have been determined and reported according to the IPCC methodologies. The emissions of greenhouse gases decreased until 1994, basically as a result of the economic recession. Hungary has chosen the yearly average emission level of 1985–87 as the base level. In 1994, greenhouse gas ...


    By Inderscience Publishers

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By ENVEA

  • Gas Analysis Improves Container Safety - Case study

    Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20 percent of all containers and this level of contamination is now accepted as commonplace. ...


    By Gasmet Technologies Oy

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • Analysis of greenhouse gas emission trends and projections in Europe 2004

    This report provides a detailed analysis and background information for the EEA report ‘Greenhouse gas emission trends and projections in Europe 2004 — Progress by the EU and its Member States towards achieving their Kyoto ...

  • A review of layer of protection analysis techniques for oil and gas industry

    The paper indicates advantages (and disadvantages) of layer of protection analysis (LOPA) over other methods to support its paramount position among different process safety analysis (PSA) methods in use today. Its simplicity (using order-of-magnitude estimates for all elements that constitute an accident scenario), universality (easy adaptation to particular needs), directness to indicate the ...


    By Inderscience Publishers

  • Comparative analysis of modern control and AI–based control for maintaining constant ambient temperature

    The objective of this paper is to study various control techniques in order to maintain constant ambient temperature by controlling the position of gas solenoid valve and expansion valve that control the volume of gas flow to the burner and volume of cool air flow into the room. In order to control the room temperature conventional P, PI, PID, model reference control (MRC), fuzzy logic control ...


    By Inderscience Publishers

  • Sensitivity analysis in a simulated auto thermal Natural Gas reforming process

    Auto Thermal natural gas Reforming (ATR) is one of the mostly used conventional hydrogen generation technologies by the highly developed countries. ATR reactors do not need any direct or indirect heat exchanger, and that is why they are more compact and so preferable than the other reformers. In this study, a process including reformers, carbon dioxide sequestration and a cryogenic separation ...


    By Inderscience Publishers

  • Simplified method for quantifying theoretical underestimation of chamber-based trace gas fluxes

    Received for publication June 19, 2009. Closed chambers used to measure soil-atmosphere exchange of trace gases including nitrous oxide (N2O) and carbon dioxide (CO2) generate errors due to suppression of the gas concentration gradient at the soil-atmosphere interface. A method is described here for estimating the magnitude of flux underestimation arising from chamber deployment. The technique is ...

  • Fixed price contract versus incentive-based contract in the oil and gas industry

    Abstract: The research question of this paper is to analyse when an operator and a service provider prefer a fixed price contract, common in the oil and gas industry, versus the uncommon incentive-based contract. The contracts are modelled with 20 parameters and one free choice variable which is the time to complete the project determined by the service provider. The method is to determine the ...


    By Inderscience Publishers

  • Sludge digestion instead of aerobic stabilisation – a cost benefit analysis based on experiences in Germany

    As a consequence of a worldwide increase of energy costs, the efficient use of sewage sludge as a renewable energy resource must be considered, even for smaller wastewater treatment plants (WWTPs) with design capacities between 10,000 and 50,000 population equivalent (PE). To find the lower limit for an economical conversion of an aerobic stabilisation plant into an anaerobic stabilisation ...


    By IWA Publishing

  • QMax - stand-alone quantification analysis application based on a weighted multi-band CLS Algorithm

    What does QMax do? Allows the user to create an SPGAS Quantification set based on pre-collected or generated standard calibrated spectra. Quantification analysis based on the information provided by the quantification set. On screen display of the quantification analysis, which includes: concentration estimation, standard error of the estimation, and residual ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you