Gas Chromatography Applications in Australasia

  • Premium

    A New GC-MS Method for Mycotoxin Analysis Using 13C-marked Mycotoxin Derivatives

    Andreas Breidbach [1] and Wolfgang Brodacz [2,3,4] developed a new GC-MS method using fully 13C isotopelabelled analogues of T-2 toxin and HT-2 toxin that allows for the detection of these toxins at concentrations as low as 2–5 ppb.

    By Merck KGaA, Darmstadt, Germany Office in AUSTRALASIA.

  • Premium

    Analysis of Herbicides in Drinking Water

    Herbicides are used throughout the world to combat the growth of unwanted plant life. These polar compounds are hydrophilic, so they may find their way into drinking water sources. While gas chromatography has historically been the preferred technique for analysis of herbicides in water samples, the use of LC-MS/MS for this application is gaining acceptance. This is due to the power of MS/MS to provide detailed identification of multiple analytes, but also in part due to the variety of HPLC stationary phases...

    By Merck KGaA, Darmstadt, Germany Office in AUSTRALASIA.

  • Premium

    Analysis of Pesticides in Beef Kidney

    The suitability of the new cleanup sorbent, Supel QuE Z-Sep+, has been successfully demonstrated for cleanup of beef kidney matrix. It was found to effectively reduce background without significantly reducing recovery of lipophilic pesticides such as organochlorines and some pyrethroids. GC-MS full-scan data indicated Z-Sep+ was found to provide better cleanup in the form of reduced background than PSA/C18, and less interference in the GC-MS/SIM analysis of the target pesticides themselves.

    By Merck KGaA, Darmstadt, Germany Office in AUSTRALASIA.

  • Premium

    Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in...

    By Merck KGaA, Darmstadt, Germany Office in AUSTRALASIA.

  • Premium

    odor control for asphalt

    Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a challenge.

    By OMI Industries (OMI) Distributor in Abbotsford, AUSTRALIA.

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    High accuracy gas flowmeters for gas mixing & blending applications

    For over 40 years, Sierra has designed and manufactured a wide range of today’s most advanced digital gas flowmeters and controllers for reasearchers and systems integrators, including a high-flow, high-pressure gas flowmeter with a complete suite of digital protocols for network integration.

    By Sierra Instruments, Inc. Distributor in Queensland, AUSTRALIA.

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Gas Chromatography for testing laboratory

    By Peak Scientific Instruments Ltd Office in Port Melbourne, AUSTRALIA.

  • Analysis of Herbicides in Drinking Water

    Herbicides are used throughout the world to combat the growth of unwanted plant life. These polar compounds are hydrophilic, so they may find their way into drinking water sources. While gas chromatography has historically been the preferred technique for analysis of herbicides in water samples, the use of LC-MS/MS for this application is gaining acceptance. This is due to the power of MS/MS to provide detailed identification of multiple analytes, but also in part due to the variety of HPLC stationary phases...

    By MilliporeSigma Office in Sydney, AUSTRALIA.

  • Pesticide and toxin screening for the food industry

    The number of pesticides and other potentially dangerous toxins is increasing constantly, posing special analytical challenges. It is crucial to screen food for the presence of toxins accurately and reliably, and to ensure the safety and quality of nutrition. To do so, we have to have the knowledge about how to deal with several hundreds of different poisonous matters. Bruker delivers solutions that meet the requirements for the identification and quantification of toxicants during the screening of each...

    By Bruker Corporation Office in Preston, AUSTRALIA.

  • Analysis of Pesticides in Beef Kidney

    The suitability of the new cleanup sorbent, Supel QuE Z-Sep+, has been successfully demonstrated for cleanup of beef kidney matrix. It was found to effectively reduce background without significantly reducing recovery of lipophilic pesticides such as organochlorines and some pyrethroids. GC-MS full-scan data indicated Z-Sep+ was found to provide better cleanup in the form of reduced background than PSA/C18, and less interference in the GC-MS/SIM analysis of the target pesticides themselves.

    By MilliporeSigma Office in Sydney, AUSTRALIA.

  • A New GC-MS Method for Mycotoxin Analysis Using 13C-marked Mycotoxin Derivatives

    Andreas Breidbach [1] and Wolfgang Brodacz [2,3,4] developed a new GC-MS method using fully 13C isotopelabelled analogues of T-2 toxin and HT-2 toxin that allows for the detection of these toxins at concentrations as low as 2–5 ppb.

    By MilliporeSigma Office in Sydney, AUSTRALIA.

  • Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

    Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in...

    By MilliporeSigma Office in Sydney, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you