Gas Detection Equipment available in Congo, Democratic Republic of the

Available in Congo, Democratic Republic of the| Near Congo, Democratic Republic of the
778 Results found

We couldn't find any results in Congo, Democratic Republic of the

Here is a list of results available in Congo, Democratic Republic of the

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Detection ×

  • Available in: Africa ×

  • Available in: Congo, Democratic Republic of the ×

LANDTEC - Model DAQ - Universal

by LANDTEC     based in Colton, CALIFORNIA (USA)

Cost effective stationary monitoring in the LANDTEC System is easily accomplished using the Universal DAQ. This streamlined platform, enables monitoring, data collection and reporting of stored data from a wide variety of devices and manufacturers at remote locations. Ideal for monitoring continuous operation as well as periodic flare shutdowns ...

SONOSCAN - Model RD - Ultrasonic Detector

by SONOTEC Ultraschallsensorik Halle GmbH     based in Halle (Saale), GERMANY

The SONAPHONE RD ultrasonic detector provides quick and easy detection of minor leaks and seal failures. The mobile handheld device locates leaks incompressed air linesand insteam, gas and vacuum systemsboth safely and precisely. The SONAPHONE RD can also be used to inspect tanks, pipes, valves, gates and steam traps.

SensAlert ASI SIL-2 Certified Point Gas Detector - Model Third Party Certified SIL-2 - New Point Gas Monitor for Detection of Combustible and Toxic Gases in Critical Safety Applications

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility ...

KNESTEL PAS-OEM - photoacoustic spectroscopy

by KNESTEL Technologie & Elektronik GmbH     based in Hopferbach, GERMANY

PAS OEM modules from Knestel enable cost-optimized and reliable gas analysis which is tailored to your application.

Vortex - Model FP - Flameproof Gas Detection Control System

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

Vortex FP and Vortex FP Compact are ATEX certified Exd Flameproof control panels for use in Zone 1 or Zone 2 hazardous areas such as on offshore production platforms or within refineries. Both offer all of the

Model PT2008 - Wireless Gas Monitor & Controller

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

PemTech's Model PT2008 Wireless Monitor has an operating frequency of 900 MHz. It interfaces with up to 64 Ultra 1000 series sensors, toxic and combustibles over wireless network. Model PT2008 displays sensor gas reading and status-like sensor calibration, fault and battery voltage. It is also available with real time data logging.

ATI - Model Q45S - Wet H2S Gas Detector

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

Odor control in wastewater treatment plants and sewage collection systems often requires the use of scrubber systems.  Many of these scrubbers employ a wet process using a hypochlorite solution to remove hydrogen sulfide (H2S) from air streams prior to discharge.  Monitoring the hydrogen sulfide in both inlet and discharge air has ...

Model MX 32 - Toxic and Flammable Gas Detection Controller

by Oldham Gas     based in Arras Cedex, FRANCE

Introducing the MX 32 measurement and alarm unit suitable to protect equipment and personnel in atmospheres that may contain flammable and toxic gases. Available with one or two channels, the MX 32 offers tailor-made detection capabilities and exceptional programming possibilities compatible with a wide range of fixed gas detectors. The total cost ...

Model 7600 - Laser Gas Detector

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

IMR 7600 a system for the continuous extractive measurement of water and water soluble components of the exhaust gas in industrial applications. The measurement is carried out as so-called hot measurement, that is Analysis line and measuring chamber are heated to prevent wash-out.

Model Second Sight TC - Remote Gas Imaging Detection System

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

Second Sight TC is a remote gas detection system developed by Bertin Technologies for General Monitors. It is designed to provide an additional layer of safety in the detection of combustible and toxic gases. With its high resolution infrared (IR) sensing technology, Second Sight can simultaneously detect up to four different gases and detect gas ...

Model IR5500 - Open Path Infrared Gas Detector

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

The Model IR5500 is an open path IR gas detector that provides continuous monitoring of methane and propane gas concentrations. The system consists of an IR source and receiver which continuously monitors for methane in both the 0 to 5000 ppm•meter and 0 to 5 LEL•meter range. A 0 to 2000 ppm•meter and 0 to 1 LEL•meter range is ...

Autronica AutroSafe - Model IFG - Integrated Fire and Gas Detection System

by Autronica Fire and Security AS     based in Trondheim, NORWAY

Autronica Fire and Security has developed the world’s first interactive-addressable system for integrated fire and gas detection: AutroSafe Integrated Fire and Gas Detection System (IFG), the only integrated fire and gas detection system that is approved according to IEC 61508 Safety Integrity Level 2 (SIL2). AutroSafe IFG has been developed ...

SMART - Model MT500 - Gas Detector with Single Channel Transmitter

by Interactive Monitoring Excellence Ltd (IMX)     based in Chiasso, SWITZERLAND

SMART MT500 is the result of OVER HALF CENTURY experience made by Cav.(Sir)Bardoni in Gas Detection Design and Developing of products and applications to protect people and plants against fire and gas hazards.The design and features of MT500 represent 'the state of the art' for Toxic and Combustible/Flammable Gas Detection. More than 20 years of ...

Model GM35 - In Situ Gas Analyzers

by Sick     based in Waldkirch, GERMANY

Simultaneously or as individual measurements, the GM35 gas analyzer measures CO2, H2O and CO or N2O as well as temperature and pressure quickly, easily and economically. Due to its in-situ measurement technology, the GM35 detects the measuring values directly in the gas stream without gas sampling. Reliability, precision and short response time of ...

Model DGS-10 - Gas Detection

by Digitron Instrumentation Ltd     based in Torquay, UNITED KINGDOM

Complimenting the styling of the TM22 and PM series, the DGS-10 - Gas Leak Detector or 'Gas Sniffer' has been specifically designed for HVAC engineers when pinpointing flammable gases in both residential and commercial applications.

Model S4000TH - Hydrogen Sulfide (H2S) Gas Detector

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

The Model S4000TH Intelligent Sensor is a microprocessor-based transmitter designed for use with General Monitors' thin film metal oxide semiconductor (TFMOS) sensors. This unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It is designed to detect hydrogen sulfide in ...

Capital Controls ADVANCE - Model Series 1610B - Single Point Gas Detector

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

Capital Controls ADVANCE™ Single Point Gas Detector, Series 1610B provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment. ADVANCE™ gas detectors are ideal for protection of personnel and property wherever chlorine or sulfur dioxide is unloaded, stored or used. Highly sensitive, the detector ...

Axetris - Model LGD F200P2-H NH3 - Laser Gas Detection Modules

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Axetris’ laser gas detection modules are stand-alone, ready-to-use OEM subsystems for selective detection and monitoring of gases such as ammonia (NH3), hydrochloric acid (HCl), methane (CH4) and carbon dioxide (CO2). The sensor is based on a technology called “TDLS” – or Tunable Diode Laser Spectrometry, which has proven ...

SEC - Model 3000 Series - Gas Detector

by Sensor Electronics Corporation     based in Minneapolis, MINNESOTA (USA)

The SEC 3000 gas detector is a unique design combining intrinsically safe and explosion proof approved standards.  This toxic gas detector allows for quick and simple field installation of a calibrated sensor module into the gas detector in hazardous locations with power applied.  Compact low cost design. Hundreds of reliable, accurate ...

System 57 Controller

by Honeywell Analytics     based in Hegnau, SWITZERLAND

A high precision, intelligent controller that accepts inputs from flammable and toxic gas detectors as well as flame, smoke and heat detectors and manual call points. For almost half a century, our gas detection systems have provided the safety needed to protect plant and personnel from flammable and toxic gas hazards. Across the globe, they are ...

Need help finding the right suppliers?

Let the XPRTs do the work for you