Gas Detection Equipment For Monitoring And Testing Available In Europe
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-200 online VOC monitoring instruments adopts PID (photoionization detector) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough UV energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas. This type of VOC monitoring ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The H2S/TOS TS MEDOR® is an industrial gas chromatograph for the analysis and monitoring of sulfur compounds in gas: H2S, Mercaptans, Sulfides and total ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 150 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Online analysis and monitoring of sulfur compounds in natural ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Automatic Gas Analyzer for Volatile PAH compounds and VOCs monitoring. The airmoSCANXPERT uses a valve with a sampling trap. It also features a metallic capillary column. Its main characteristics are: Miniaturization, sensitivity, mobility and ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous or discontinuous mode permanent gases monitor for laboratory or online. A highly automated system for routine measurement of permanent gases on the range : ppb or ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
MicroSafe 500 and 600 Series gas detectors feature a non-intrusive operator interface. Calibration and programming instructions appear in simple intuitive and sequential script on a 16-character backlit display. The transmitter design incorporates extensive fault diagnostics with each condition conveniently identified on the transmitter ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The chromEnergy is an automatic and industrial gas analyzer designed for the measurement of hydrocarbons in natural gas. Using a Thermal Conductivity Detector (TCD), the analyzer is the perfect tool to detect and quantify hydrocarbons from C1 to C6+. Coupled with the last version of Chromatotec’s software (Vistachrom), the instrument is able to provide calorific value and WOBBE index to the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The DG7 Series is a group of intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring. The DG-TT7-S is a solid-state metal oxide semiconductor. The DG-TX7 employs a pair of OXYCOL catalytic sensors. All DGi-TT7 are constructed from a common housing and electronics with the detection properties being determined by the type of ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs. The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-106 is a flameproof bypass type tunable laser gas analyzer for industrial on-line analysis and environmental on-line monitoring, especially suitable for harsh working conditions such as high temperature, high humidity, high dust, high pressure, and for small pipes where in-situ analyzer is not applicable. The transmitter and receiver are installed on a back board. The analyzer contains auto ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GT-Fire is a dedicated hand-held methane detection meter specialized for the fire industry. This user-friendly meter has an ergonomic design coupled with a rugged polycarbonate construction that ensures durability and ease of operation as standard. The GT-Fire allows leak detection to be conducted for flammable (PPM & LEL) gases as well as Carbon Monoxide (CO), Oxygen (O2), and Hydrogen ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you