combustible gas detection Equipment available in Syria

Available in Syria| Near Syria
135 Results found

We couldn't find any combustible gas detection equipment in Syria

Here is a list of results available in Syria

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Detection ×

  • Keyword: combustible gas detection ×

  • Available in: Asia & Middle East ×

  • Available in: Syria ×

Bernt - Model S4000CH - Intelligent Sensor for Combustible Gas Detection

by Bernt Messtechnik GmbH     based in Düsseldorf, GERMANY

Compact Hydrocarbon Transmitter; EExd Design. SIL3 suitable, IEC61508. Display up to 120% LEL. Output: 4-20 mA, Relays and HART optional. High-quality sensor element. Remaining sensor life indication. High longterm stability. High poison resistance. Approvals: ATEX, CSA/FM, GOST. Typical lifetime of 6 to 8 years.

HORIBA - Model PG-350E - Portable Gas Analyzer

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN 14792).

ACME - Model 40-ST Series - Combustible Gas Sensor-Transmitter

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Combustible gas sensor/transmitters in robust PVC NEMA 3 housing utilizing catalytic bead sensor technology. Available with either voltage/ current analog outputs or RS- 485 serial digital communication interface compatible with Acme CEL series multipoint gas detection systems.

ACME - Model 40-XP Series - Combustible Gas Sensor-Transmitters

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Explosion-proof combustible gas sensor/transmitters class 1 div 1 environment utilizing catalytic bead sensor technology. Available with either voltage/ current analog outputs or RS- 485 serial digital communication interface compatible with Acme CEL series multipoint gas detection systems.

GPro - Model 500 - Carbon Monoxide Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The most accurate and reliable instrument for efficient combustion control applications. The GPro 500 CO TDL is the most accurate and reliable instrument for efficient combustion control applications. By allowing trim control operation mode, the excess air limit can be lowered and adapted to changing conditions without jeopardizing safety.

ACME - Model WS Series - Wireless Sensors/Transmitters

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME WS Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900 MHz or 2.4 GHz wireless medium.The WS Sensor / Transmitter includes a high gain antenna concealed inside the enclosure as well as a built-in battery pack that can be ...

ACME - Model CEL4 Series - Multi-gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME CEL4 Series is a microprocessor-based up to 4 channel multi-gas detection and control system that can be used with a wide variety of ACME toxic, combustible & oxygen gas sensors. The sensors can be grouped in any combination. The wiring between the Control Panel and the remote sensors is accomplished by a 4-wire ...

ACME - Model CEL Series - Multi-gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEL Series centralized detection and control system can monitor up to 32 remote detectors via a 4-wire RS-485 daisy-chain communication link, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, Propane, ...

ACME - Model UN-ECH Series - Uniset Stand-Alone Gas Monitor

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

UNISET is a single-point stand-alone gas monitor for a number of toxic and flammable gases as well as oxygen deficiency. It utilizes state-of-the art sensor technology: electrochemical for toxic gases and oxygen; catalytic bead for combustibles. The UNISET has up to four SPDT relay outputs fully user-configurable to operate at different thresholds ...

ACME - Model TW-ECH - Twinset Stand-Alone Dual Gas Monitor

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The TwinSet is a stand-alone dual-gas detection unit. In its standard configuration the TwinSet wil have (1) built-in CO sensor and (1) remote sensor that can be for any one of the three gases listed, namely, CO, NO2 or Combustible gas (CH4 C3H8). The TwinSet is a 'system-in-a-box' that provides dry contacts for the activation of fans, dampers and ...

ACME - Model CEL(LS) Series - MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The ACME CEL(LS) MultiSet series is a microprocessor-based multipoint multigas detection and control system that can be used with a wide variety of toxic, combustible, refrigerant & oxygen gas sensors. The sensors can be grouped in any combination. The wiring between the Control Panel and the remote sensor-transmitters is accomplished via ...

ACME - Model CEW(LS) Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Scalable system using Wireless Sensor-Transmitters communicating with a central Control Panel as well as Remote Wireless Relay Modules to operate ventilation equipment & Remote Alarms. FCC/IC/ETSI/CE approved RF modules for up to 256 remote sensor-transmitters & up to 96 Remote Relay Modules.- Minimal installation cost - virtually no field ...

ACME - Model CEW Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW Series centralized detection and control system can monitor up to 32 remote detectors via a wireless RS-485 communication link at 900MHz or 2.4GHz, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, ...

ACME - Model CEW4 Series - Wireless Multiset Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW4Quadset system monitors up to 4 remote sensors wirelessly over a 900MHz or 2.4GHz network. This results in substantial savings in labor and material costs during installation. While typically used for enclosed parking facilities where CO and NO2 (for Diesel fumes) are the gases detected, the CEW4 can monitor other toxic gases such as ...

ACME - Model ECH-ST Series - Gaspost Toxic Gas Sensor / Transmitter

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The Acme Gaspost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The 4-20mA transmitter is designed for standard 2-wire loop-powered operation where the output is supplied via the same pair of wires as the power supply.

ACME - Model CO2-2000 - Carbon Dioxide Detection & Control Unit

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million range (PPM)and is ideal for applications ranging from conference rooms to home gyms. The CO2-2000 is easy to install and support. Measurement output is via a 4-20 mA current loop or a 0-10V interface. Low power consumption makes the CO2-2000 ...

Extech - Model FG100 - Combustible Gas Leak Detector

by Extech Instruments     based in Nashua, NEW HAMPSHIRE (USA)

Extech FG100 Combustible Gas Leak Detector has a fast response detection of gas leakage and detects combustible gases, Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm. The Extech FG100 gas detector is a convenient compact portable size device with pocket clip.

Remote Calibration, Termination, And Separation

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The PIRTB provides termination for the PointWatch PIR9400 gas detector and the PIRECL Pointwatch Eclipse gas detector when remote calibration initiatio

Volumetric (PIRVOL) IR Gas Monitor

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The model PIRVOL IR gas monitor is designed to monitor hydrocarbon vapors in the range of 0-100% by volume, and is ideally suited for oil and gas wellhead mud-logging, hydrocarbon processing, and other extractive sampling applications. The PIRVOL provides superior life-cycle costs over destructive hot-wire measurements such as thermal conductivity ...

Model CGS - Catalytic Combustible Gas Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The catalytic combustible gas sensor (CGS) is a globally-approved, stainless steel sensor that is poison-resistant. It provides unmatched detection of almost all combustible gases in harsh industrial environments, and is compatible with the entire line of Det-Tronics combustible gas transmitters and controllers. The CGS must be used with a ...

Related Terms for combustible gas detection

Need help finding the right suppliers?

Let the XPRTs do the work for you