Fixed Gas Detector (Gas Detection) Equipment Available In Cayman Islands
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
MicroSafe 500 and 600 Series gas detectors feature a non-intrusive operator interface. Calibration and programming instructions appear in simple intuitive and sequential script on a 16-character backlit display. The transmitter design incorporates extensive fault diagnostics with each condition conveniently identified on the transmitter ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Oldham is pleased to propose its wireless system with the OLCT 80 field detector/transmitter. This model allows wireless connectivity in ATEX 1 ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-900: CO2 Industrial Fixed Gas Detector is a gas safety solution for industries that need to measure up to 5% carbon dioxide levels in order to mitigate potential hazards from occurring. This device also includes an IP64 industrial enclosure specifically for harsh environments or where wash-down is ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
to one channel for the detection of CO, NO or NO2 in a car park application. Easy to install and operate, these detectors combined with the MX 16 control unit meet demanding user ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
across all configuration, Freedom 5000 helps users streamline the transmitter’s operation and maintenance requirements for its points of toxic gas ...
-
Manufactured by Senko Co., Ltd.based in SOUTH KOREA
Measuring type : Diffusion Type. Accuracy : ±3%/Full scale. Parameter Control : Front 3 magnetic switch(calibration, maintenance, alarm setting) operation mode display. Visual: LCD alarm display, LCD Backlight, Indicator LED Audible / buzzer (90dB at 10cm). Measuring value display : Digital LCD Display(4-digit) alarm display. Visual : LCD alarm display, LCD Backlight, Indicator ...
-
Manufactured by Uniphos Envirotronic Pvt. Ltd. (UEPL)based in INDIA
KwikSense Smart Gas Transmitters are universal transmitters with plug & play sensor technology. They are capable of accepting more than 100 smart gas sensors. Its non-intrusive calibration helps customers to calibrate the transmitters in hazardous area without opening the transmitter thus reducing the down time for calibration. ...
-
Manufactured by Henan Inte Electrical Equipment Co., Ltd.based in CHINA
KQ500D series fixed gas detector is also called gas sensor.It transforms the gas density in the operating site into standard electric current signal(4-20mA). With LED display, detector's sensor can be changed and reused as soon as it is connected to electricity. KQ500D detector ...
-
by Altezza LLPbased in KAZAKHSTAN
The OLC/OLCT 100 range of fixed detectors has been designed for detection of combustible gases, toxic gases or oxygen. Available in explosion-proof or intrinsically safe versions, the OLCT 100 is suitable for detection of all gases in ATEX zones. The OLCT 100 is available in a stainless steel version, offering increased resistance to ...
-
Manufactured by Senko Co., Ltd.based in SOUTH KOREA
Measuring type : Diffusion Type. accuracy : ±3%/Full scale. Parameter : Control Switch(calibration), Admin Console(maintenance, OPTION). Operation mode display : 2-LED(Operating and Zero Cal, Span Cal. LED). Output signal : 4-20mA DC(3wire). Conduit connection : NPT 3/4" (2way). Mounting type : Wall mount. Setting : 1 Switch Interface(Calibration), Console set ...
-
by Altezza LLPbased in KAZAKHSTAN
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication ...
-
Manufactured by Detector Oybased in FINLAND
Modern and user-friendly gas detector for the measurement and monitoring of toxic gases, oxygen, nitrogen and hydrogen. The detector can be used to measure a wide range of gases. It is easy to install and connect to excisting automation solutions. The detector is also compatible with other systems and sustainable development has ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you