hydrogen sulfide gas Equipment available in Tonga

Available in Tonga| Near Tonga
38 Results found

We couldn't find any hydrogen sulfide gas equipment in Tonga

Here is a list of results available in Tonga

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Detection ×

  • Keyword: hydrogen sulfide gas ×

  • Available in: Australasia ×

  • Available in: Tonga ×

Model PT295 - Hydrogen Sulfide Gas Sensor

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

The PT295 hydrogen sulfide gas detector is a microprocessor-based sensor designed to detect hydrogen sulfide in parts per million (ppm) level. The unit features easy one-man calibration initiated by simply activating a magnetic switch and applying the gas

Hydrogen Sulfide Gas Area Monitor

by Chemteq     based in Norfolk, VIRGINIA (USA)

The hydrogen sulfide area monitor is highly sensitive and selective indicator for the presence of traces of hydrogen sulfide in air. Suitable location positions for the area monitor are on stack, duct, vent or flue where representative samples can be obtained.

Model S4000TH - Hydrogen Sulfide (H2S) Gas Detector

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

The Model S4000TH Intelligent Sensor is a microprocessor-based transmitter designed for use with General Monitors' thin film metal oxide semiconductor (TFMOS) sensors. This unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It is designed to detect hydrogen sulfide in ...

cubic - Model LDB series - Handheld Hydrogen Sulfide (H2S) Gas Detector

by Wuhan Cubic Optoelectronic Co., Ltd     based in Wuhan, CHINA

Specifications: Measurement method ElectrochemicalRange 0-100ppm (can be customized)Resolution 1ppmMax Error 3% FSResponse time 60sWorking environment Atmospheric Pressure 86-106kpaWorking temperature 0-40Storage temperature -20-70Humility 95%RHWarm-up 30sStandby 10hSampling Diffusion typePower supply DC3.7V 1300mAh lithium battery 220V to 5V ...

cubic - Model CLD series - Wall Mounting Hydrogen Sulfide (H2S) Gas Detector

by Wuhan Cubic Optoelectronic Co., Ltd     based in Wuhan, CHINA

Specifications: Measuring method ElectrochemicalPower supply DC 8-25VRange 0-100ppm (can be customized)Resolution 1ppmDisplay 4-digit LED displayMax Error 3% FSZero repeatability 1%FSZero drift 1%/monthWorking Temp -20-55Storage Temp -40-85Warming time 30sOutput Digital: RS485, 2 way TTL level; Analog: 4 ~ 20mAHumidity 0-95% RH ...

Jerome - Model 631 - Gold Film Hydrogen Sulfide Analyzer

by Arizona Instrument LLC     based in Chandler, ARIZONA (USA)

The portable Jerome 631 Hydrogen Sulfide Analyzer displays low-level concentrations in just seconds. It offers an analysis range of 0.003-50 ppm for odor and corrosion control, safety, and leak detection in such industries as wastewater treatment, oil and gas, pulp and paper, and farming. This simple-to-use instrument utilizes an internal ...

Model PT395 - Hydrogen Sulfide Sensor

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

The PT395 hydrogen sulfide sensor is a microprocessor-based sensor designed to detect hydrogen sulfide in parts per million (ppm) level. The unit features easy one-man calibration initiated by simply activating a magnetic switch and applying the gas.

Model PT205 - Hydrogen Sulfide Sensor

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

The PT205 Hydrogen Sulfide Sensor is designed to detect Hydrogen Sulfide in air and provides an analog output signal. The PT205 uses electrochemical cell technology to detect H2S in parts per million (ppm).

Model S - Online Determination Unit

by ECH Elektrochemie Halle GmbH     based in Halle (Saale), GERMANY

The S-Online for online determination of sulfides provides the opportunity to measure sulfides/H2S even below the odor threshold in wastewater. By the combination of a highly efficient gas extraction and a selective detection method, sulfide/H2S is determined in aqueous solutions.

Model H2S - Analysator

by ECH Elektrochemie Halle GmbH     based in Halle (Saale), GERMANY

The H2S-Analysator creates the opportunity for analysis of hydrogen sulfide in gases and liquids in only one device.

Model EC4-100-H2S - Hydrogen Sulfide Electrochemical Sensor

by SGX Sensortech (IS) Ltd     based in Chelmsford, UNITED KINGDOM

SGX electrochemical sensors detect gases by producing a chemical reaction between the gas and oxygen contained in the sensor. This reaction produces a small current, which is proportional to the concentration of the gas present. The sensor is, in effect, a type of fuel cell.

ACME - Model CEW4 Series - Wireless Multiset Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW4Quadset system monitors up to 4 remote sensors wirelessly over a 900MHz or 2.4GHz network. This results in substantial savings in labor and material costs during installation. While typically used for enclosed parking facilities where CO and NO2 (for Diesel fumes) are the gases detected, the CEW4 can monitor other toxic gases such as ...

AMETEK - Model 5100 - Gas Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The Model 5100 hosts a single laser platform to measure a single gas analyte. The Model 5100 can measure any one of the following gas analytes: water vapor, methane, hydrogen sulfide, carbon dioxide, and oxygen in process or flue gas. If water vapor is the measured gas analyte, methane can be monitored additionally at percent levels using the same ...

Model Cal 2000 - Calibration Gas Instrument

by Advanced Calibration Designs, Inc. (ACD)     based in Tucson, ARIZONA (USA)

The Cal 2000 provides unmatched versatility and accuracy in calibration gases. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Chlorine Dioxide, Hydrogen, Hydrogen Cyanide, and Hydrogen Sulfide gas detectors with a single instrument.

ATI - Model Q45S - Wet H2S Gas Detector

by Analytical Technology, Inc. (ATI)     based in Collegeville, PENNSYLVANIA (USA)

Odor control in wastewater treatment plants and sewage collection systems often requires the use of scrubber systems.  Many of these scrubbers employ a wet process using a hypochlorite solution to remove hydrogen sulfide (H2S) from air streams prior to discharge.  Monitoring the hydrogen sulfide in both inlet and discharge air has ...

Model CAL 2000LT - Calibration Gas Instrument

by Advanced Calibration Designs, Inc. (ACD)     based in Tucson, ARIZONA (USA)

The CAL 2000 LT is the calibration gas instrument of choice for the user who does not need variable flow rates or concentrations. The CAL 2000 LT is available in pre-set flow-rates of 0.5 or 1.0 PPM. Field replaceable calibration gas sources (generating cells) provide a calibration standard for accurately testing Chlorine, Hydrogen, Hydrogen ...

Toxic - Model SSS-903 - Gas Detector

by ESP Safety, Inc.     based in Houston, TEXAS (USA)

ESP Safety’s SSS-903 Toxic Gas Detector is designed to safely detect and monitor a variety of toxic gases in the air, including hydrogen sulfide, carbon monoxide, chlorine, nitric oxide, and sulfur dioxide, over a range of 0-100 ppm. By connecting the sensor to the transmitter, the SSS-903 is programmed to automatically recognize a ...

Model TS4000H - H2S Electrochemical Gas Detector

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

The Model TS4000H Intelligent Toxic Gas Detector continuously monitors hydrogen sulfide (H2S) in several ppm ranges, delivering highly accurate detection and protection. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It provides status indication and alarm outputs. ...

ToxiRAE - Model 3 - Portable Single-Gas Monitor

by RAE Systems by Honeywell     based in San Jose, CALIFORNIA (USA)

This portable single-gas monitor is designed to keep workers safe against the threat of carbon monoxide (CO) and hydrogen sulfide (H2S). The ToxiRAE 3’s high-performance, three-electrode sensor delivers the fastest possible response time. When used with the AutoRAE Lite bump test and calibration station, it provides a low total cost of ...

Model PT605 - H2S - Process Gas Analyzer

by Pem-Tech, Inc.     based in Sugar Land, TEXAS (USA)

The Model PT605 H2S Process Analyzer has been designed for the detection of Hydrogen Sulfide in process streams and in natural gas pipelines.

Need help finding the right suppliers?

Let the XPRTs do the work for you