toxic gas detector Equipment available in Nunavut

Available in Nunavut| Near Nunavut
136 Results found

We couldn't find any toxic gas detector equipment in Nunavut

Here is a list of results available in Nunavut

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Detection ×

  • Keyword: toxic gas detector ×

  • Available in: Canada ×

  • Available in: Nunavut ×

VOC-TRAQ - USB Toxic Gas Detector & Data Logger

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The VOC-TRAQ total volatile organic compound (TVOC) detector is the easiest way to monitor and record TVOCs using any PC with a Windows operating system. Using the award winning Baseline-MOCON piD-TECH plus photoionization detector makes the VOC-TRAQ the most reliable, accurate, and inexpensive portable TVOC detector on the market. Designed for ...

MultiTox - Model DGI -TT7-E - Electrochemical Toxic Gas Detector

by Simtronics SAS     based in Aubagne Cedex, FRANCE

The MultiTox DGI -TT7-E intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring.The device has been designed for ease of operation and maintenance. All DGI -TT7-E are constructed from a common housing and electronics with the detection properties being determined ...

Det-Tronics - Model GT3000 - Toxic Gas Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The Det-Tronics GT3000 line of electrochemical fixed-point toxic-gas detectors provides continuous monitoring of the atmosphere for potentially hazardous toxic gas leaks or oxygen depletion.

Model TS4000H - Toxic Gas Detector

by General Monitors     based in Lake Forest, CALIFORNIA (USA)

The Model TS4000H Intelligent Toxic Gas Detector continuously monitors a variety of toxic gases in the ppm range, delivering highly accurate detection and protection. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It provides status indication and alarm outputs. ...

Signalpoint - Flammable And Toxic Gas Detector

by Honeywell Analytics     based in Hegnau, SWITZERLAND

The Signalpoint range of flammable, toxic and Oxygen gas detectors offers a low cost solution to indoor gas monitoring. Supplied with an integral pre-wired junction box, the detector can be installed using conduit or cable and glands depending on individual site standards.

Signalpoint Pro - Toxic Gas Detector

by Honeywell Analytics     based in Hegnau, SWITZERLAND

The Signalpoint Pro range of toxic and Oxygen gas detectors with integral display offers a low cost solution to outdoor gas monitoring. The Signalpoint Pro is an intrinsically safe, cost effective, toxic and Oxygen gas detector for use in the toughest environmental conditions. A 2-wire, 4-20mA loop powered device that can be used indoors or ...

Matheson-Kitagawa - Model 8014 Series - Toxic Gas Detector System

by Chrysalis Scientific Technologies Inc.     based in Oakville, ONTARIO (CANADA)

The Matheson-Kitagawa Toxic Gas Detector System is a complete “sampling and analysis’’ kit for on-the-spot readings. It is an excellent method for day-to-day checking, screening, QC in the lab or plant and spot testing. Non-technical employees can operate the Matheson-Kitagawa System with a minimum of training. The Model 8014KB ...

Sensepoint Flammable And Toxic Gas Detector

by Honeywell Analytics, Inc.     based in Lincolnshire, ILLINOIS (USA)

ATEX certified flammable, toxic and Oxygen gas detectors offering a low cost solution to hazardous area monitoring. The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a low cost solution to their gas monitoring needs, in or out of doors and even in potentially explosive atmospheres. Supplied with a pre-wired junction ...

SafEye - Model 400 Series - Open Path Toxic Gas Detector

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Industry-proven toxic open path gas detection for line of sight applications.

Model 8081A Series - Toxic Gas Leak Detector

by Chrysalis Scientific Technologies Inc.     based in Oakville, ONTARIO (CANADA)

Matheson’s PortaSens Series of detectors provide compound specific leak detection of a wide variety of toxic gases and chemicals. Choose from twenty-three available sensors to suit your particular application. Each is optimized to provide maximum sensitivity with minimum interference from other gases.  A unique feature of the PortaSens ...

Toxic - Model SSS-903 - Gas Detector

by ESP Safety, Inc.     based in Houston, TEXAS (USA)

ESP Safety’s SSS-903 Toxic Gas Detector is designed to safely detect and monitor a variety of toxic gases in the air, including hydrogen sulfide, carbon monoxide, chlorine, nitric oxide, and sulfur dioxide, over a range of 0-100 ppm. By connecting the sensor to the transmitter, the SSS-903 is programmed to automatically recognize a ...

Model GD1 - Toxic Laser LOS Gas Detector

by Simtronics SAS     based in Aubagne Cedex, FRANCE

The Simtronics GD1 sets a new standard for toxic gas detection. Using a tuneable laser diode, the GD1 delivers enhanced coverage and fail safe detection. The performance improvement marks a genuine step change for safety systems and life cycle cost savings.

Model GD10P-CO2 - Infrared Gas Detector

by Simtronics SAS     based in Aubagne Cedex, FRANCE

The GD10P-CO2 has been designed with features that provide an effective response to the detection of CO2 in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. The GD10P-CO2 differs from all other point infrared gas detectors, because they utilise silicon based solid-state sources.  The ...

ACME - Model VOC-2 - Volatile Organic Compounds Detector

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The VOC-2 detector is designed for enclosed spaces where chemical reagents or known VOC pollutants could leak into the air and pose a danger to personnel. This detector can cover up to 10,000 sq. ft. of clear, open space. It is designed to operate two-speed fans using two dry contacts that close at the appropriate low and high concentration levels ...

NTMOS H2S Gas Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The Det-Tronics Nanotechnology Metal Oxide Semiconductor (NTMOS) gas detector delivers fast and repeatable H2S detection in extreme temperature and humidity applications where electrochemical sensing technologies are not preferred. The NTMOS H2S sensor uses the latest nanotechnology to ensure accuracy, reliability, and repeatability. The sensing ...

Hydrogen Flouride Gas Laser Detector

by Senscient Inc     based in Holyrood Close,, UNITED KINGDOM

This Open Path Gas Detector (OPGD) is specific to Hydrogen Fluoride (HF). The separate transmitter and receiver assemblies are certified for use in potentially explosive aospheres and can detect HF over distances of 5 to 120 meters. Constructed in high grade corrosion resistant 316 Stainless Steel this device is ideally suited for onshore, open ...

SensAlert ASI SIL-2 Certified Point Gas Detector - Model Third Party Certified SIL-2 - New Point Gas Monitor for Detection of Combustible and Toxic Gases in Critical Safety Applications

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility ...

Crowcon - Model F-Gas - Infrared Fixed-Point Detector

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

A high quality infrared fixed-point detector that delivers dependable detection of freon gases. Available for detecting a range of different refrigerant gases and also sulphur hexafluoride (SF6), the Crowcon F-Gas Detector can be connected to any control system that accepts an analogue signal. Housed within an IP54 rugged enclosure, the F-Gas ...

Airwave Electronics - Model Protec II - Toxic Gas Detection System

by Airwave Electronics Ltd.     based in Didsbury, ALBERTA (CANADA)

The Protec II (SAS) is a 'Stand Alone' remote sensing system for toxic gases. it is intended to be placed in the area where leaks of these potentially dangerous gases are likely to occur. The protec II sensors measures the levels of these gases, activates alarms based on the concentration, and can transmit a signal to the appropriate control ...

GDS - Model XDI-F6 win - Hazardous Area Gas Detector

by GDS Technologies Ltd.     based in West Yorkshire, UNITED KINGDOM

The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatched number of configurations allowing for a simple stand alone 4~20mA transmitter or a CAN bus address system enabling networking of up to 64 process sensors with a local diagnostics port which allows interrogation using a PC. Network sensors may also ...

Need help finding the right suppliers?

Let the XPRTs do the work for you