Gas Detection Equipment For Monitoring And Testing In Idaho
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
-
Manufactured by RadQual, LLCbased in USA
This patented product and application allows for cross calibration of your PET scanner, dose calibrator, and well detector for Ga-68 and F-18, and is useful in multi-center imaging trials to both assess bias and enable correction of biases due to instrumentation factors for serial PET ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEL-LS RS-485 gas detection network, acting as an addressable output to the CEL Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, and other kinds of peripherals, at programmable set ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme MGMS is our latest multipoint, multigas detection system designed with modular construction and remote connectivity in mind. A DIN-rail mountable system consisting of a CM (Controller Module), RM (Relay Module), and AM (Analog Module) snap together for ease of installation, expandability, and upgradeability. Industry-standard communication protocols like Ethernet and BACnet are available ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEW wireless gas detection network, acting as an addressable output to the CEW Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, etc at programmable set points. Since the WR Relay Module operates without the need to be hardwired to the controller, it can be located at any point within the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Deploy a fixed MeshGuard wireless gas-monitoring network quickly with this complete, turnkey solution. The MeshGuard RDK includes a controller and your choice of a combination of toxic and combustibles gas monitors. This kit provides a complete self-forming, self-healing gas detection network system. Certified for Class I, Division 1 environments, the MeshGuard RDK comes in a ruggedized, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you