Gas Detection Equipment For Monitoring And Testing
-
ShowcaseManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in ...
-
ShowcaseManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The CPT truck is a CPT penetrometer rig based on a truck-chassis. The CPT truck has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the centre of gravity of the CPT truck, either an electrical or mechanical probe (called a cone) is pushed into the ground and the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3751-2 basic ventilation system (dual gas) and Innova 3751-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
EQMS-200A alarm online TVOC monitoring system adopts the PID photoion method for gas detection. The UV light produced by ion lamp irradiates on target gas, and the gas will be ionized after absorbing enough UV energy. The target gas concentration can be detected through the small current produced by gas ionization. ...
-
PremiumManufactured by Tianjin Zwinsoft Technology Co.,Ltdbased in CHINA
ZPO6 is a wall-mounted gas control panel. This model is mini size,flexible and convenient to install. Support 1-4 channels 4-20MA signal acquisition and with sound and light alarm function. Relying on accurate gas detection and monitoring, the panel can control solenoid valves,exhaust fans, motors, water pumps, sound and light alarms, sprinkler systems, machinery and equipment, etc,to achieve ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Oxygen (O2) and Carbon Dioxide (CO2) Weld Purge Analyzer is designed to provide accurate measurements down to 0% oxygen and up to 100% carbon dioxide when back purging with argon and CO2 gas mix during welding. ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities. The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations. The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
LGT-450 Laser Gas Analyzer is a kind of 4U in-place tunable laser gas analyzer targeting at industrial online monitoring and ambient environment online monitoring. It adopts TDLAS Technology, which can scan specific absorption peak of the measured gas (without background gas absorption) and the gas concentration can be calculated by using second harmonics and the broadening information of the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The intelligent network patrol for maximum safety of networks. A leakplotter vehicle basically consists of the following components: the suction unit with bells for collecting samples, the measuring technology with FID and oxidiser, the notebook with the software controlled operating and documentation unit, and the option for GPS documentation along with the test set for automatic adjustments. ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
EQMS-200B alarm TVOC online monitoring system adopts PID photoion method for gas detection. The UV light produced by ion lamp irradiates on target gas, and the gas will be ionized after absorbing enough UV energy. The target gas concentration can be detected through the small current produced by gas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-501 is a portable carbon dioxide (CO2) detector designed to measure concentrations in many applications and industries. With long-term data storage, ambient gas levels can be read in real time on screen or saved for data analysis. Includes visual and audible high CO2 alarms. ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
LGT-106 is a flameproof bypass type tunable laser gas analyzer for industrial on-line analysis and environmental on-line monitoring, especially suitable for harsh working conditions such as high temperature, high humidity, high dust, high pressure, and for small pipes where in-situ analyzer is not applicable. The transmitter and receiver are installed on a back board. The analyzer contains auto ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Ammonia analyzer adopts chemiluminescence principle to detect ammonia gas in ambient air, equipped with ammonia reformer and sampling system. The range can be selected between 0-500ppb and 0-2000ppb. The ammonia analyzer is able to reduce ammonia absorption through control of internal sampling gas flow processing of sampling gas path to ensure the response time as well as accurate control of ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems. Syntel stores alarm and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-IR-100M infrared gas sensor is mainly composed of infrared correlation filter technology (GFC) and self-designed long optical path gas absorption cell (L-Cell), wavelength filter, infrared detector and high-precision signal processing circuit to complete the gas Quantitative analysis in the infrared band. The sensor has the characteristics of high precision, good stability and fast response ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you