Gas Leak Detection Equipment For Monitoring And Testing Available In Bhutan
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
ShowcaseManufactured by Hermann Sewerin GmbHbased in GERMANY
Gas leak detector with or without pump - for indoor installations and house tests. The EX-TEC SNOOPER 4 is a gas leak detector for detecting the smallest leaks in installation lines and at connection points. The modular device concept allows users to choose either a basic device without a pump (diffusion device) or a device with integrated ...
-
PremiumManufactured by Testo, Inc.based in USA
When house owners notify the network operator or fitter that they can clearly smell gas in the house, a highly explosive gas concentration may already be present (4–17%). The fitter has to use a gas detector to check sections of gas pipes for leak tightness to locate possible ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features a pigtail connection and remote 4-wire control board that is ideal for small/confined vessels and difficult to access locations. Typical flow applications include lube oil monitoring, cooling water detection, air flow and/or leak detection and analyzer sample flow verification. Wetted parts are 300 series stainless steel. CPVC with 300 series stainless steel or Hastelloy C-22 sensors ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
The Bubble Creator enables the use of tracer gas with filled pipes under operation without interruption or discharge. The gas is inserted in form of tiny bubbles via a special probe and will dissolve in the water. Best position for inserting the gas is at high velocity and or turbulence points of the pipeline (i.e. behind partially shut ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS Controller, which provides a large graphical user interface ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being destroyed. It has a high-quality sensor, and uses natural diffusion as the method for detection. It has high sensitivity and ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The Turbo variant of our best selling Colt 4 incorporates a much larger mass, precision machined heat exchanger block, and 2 x 1100w Firerod cartridge heaters switched via a solid state relay. The result - almost twice the smoke output of the standard Colt 4, and the ability to make smoke "Off Power" for longer - because it has a greater amount of retained energy within the heat exchanger. With ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
technology for remote detection of gas leaks. The RMLD-CS (Remote Methane Leak Detector - Complete Solution) is a highly advanced technology, capable of detecting methane leaks from a remote distance. This technology makes it possible to detect leaks in areas that may be difficult to reach such as busy roadways, yards with dogs, fenced-off areas, bridge pipes and biogas ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Ultra-compact and extremely easy to use – the AQUASCAN 620L laptop correlator utilizing both the legendary, industry-leading cordless AQUASCAN sensor-transmitters and the powerful “Auto Filter” ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The H25-IR PRO is a next generation industrial-grade refrigerant leak detector and gas analyzer capable of detecting over 40 of the most commonly used refrigerants and halogen gas compounds. Special models measure and detect R600a, R290, R744 (CO2) or SF6. It can be used to locate and then quantify gas leaks, as well as log and totalize a group of leaks in a system. The H25-IR PRO adds new ground ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Measuring device for load testing, leak tightness testing and serviceability testing in accordance with TRGI and for regulator inspection. The MiniLec 4 is a measuring device for load testing, leak tightness testing and serviceability testing in accordance with DVGW (German Technical and Scientific Association for Gas and Water) Code of Practice G 600 "Technical regulations for gas installations" ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The Gasurveyor 500 Series is the most flexible range of gas detectors available from GMI. By simple selection of hardware and software options, the instrument can be readily configured to suit your exact application. Offering highly accurate and reliable instrumentation in an extremely robust, anti-static case, the Gasurveyor 500 Series measures gases common in many applications. ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Powerful high-end touchscreen correlator designed specifically to find leaks on large diameter pipes over long distances – intelligent, non-intrusive and user-friendly. This correlator is currently the most advanced correlator in the ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Combination measuring devices for gas supply with integrated ethane detector. Products from the EX-TEC HS family combine ergonomics with cutting edge technology. Thanks to its innovative design this range offers the user the right instrument for each different application. All appliances from the EX-TEC HS family meet the requirements of DVGW Code of Practice 465-4 (German Technical and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Flame ionisation detectors for inspecting underground gas lines. The PORTAFID M3K portable gas detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. The PORTAFID M3K features an 0.4 l fuel gas bottle, which is carried separately on the user's ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The intelligent network patrol for maximum safety of networks. A leakplotter vehicle basically consists of the following components: the suction unit with bells for collecting samples, the measuring technology with FID and oxidiser, the notebook with the software controlled operating and documentation unit, and the option for GPS documentation along with the test set for automatic adjustments. ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you