Gas Mass Flow Monitoring Equipment For Monitoring And Testing Available In Vanuatu
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
We propose multiplexers (selection of multichannel samples) adapted to your installation and controlled by our software VISTACHROM. VISTACHROM can : "Cycle" methods to analyze different ranges on each stream. Transfer data via MODBUS, specific for each ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-300WE-HT air sampler is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available. The HT model is designed for operation in ambient temperatures as high as 60°C ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-HPE is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available having similar flow rate ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4020 can mix up to seven (7) component gases simultaneously to generate precise gas calibration standards and gaseous atmospheres in a broad dynamic range. The dilution capabilities of the Series 4020 allows dilution ratios from 1:1 to 10,000:1 (with larger ranges possible, depending on the configuration of the system). It provides a low cost, computerized gas ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Modular calibration system primarily designed as transfer standard to synchronize analyzers in different measuring stations. Transport of the span gas cylinders normally used as transfer standard is unnecessary when using a permeation ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. The Series 4040 can produce gas concentrations from ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Models ST51 and ST51A are a compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Series 4000 UHP Gas Mixing System combines the accuracy and repeatability of the Series 4000 with a welded, Ultra-High-Purity (UHP) construction. All units are optimized for your target gases. With all metal seals, units are commonly used for both research & development and/or production applications, including calibration of analytical tools that detect impurities in ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The patented* VIP (Vortab Insertion Panel) flow conditioner completely neutralizes flow profile irregularities caused by elbows, valves, blowers, compressors, and other flow disturbances that commonly occur in piping and duct runs and cause flow meter inaccuracies. The VIP provides a swirl-free, symmetric and repeatable flow profile that flow meters require for accurate measurement. Model VIP ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly state-of-the-science flow metering solution for industrial processes ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Automotive Gas Divider is an advanced instrument for the dynamic calibration of automotive or mobile source emissions analyzers. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument, protecting your investment and giving you the needed flexibility should standards change. Common ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Inhalation of vapor is the primary route of elemental mercury toxicity in the workplace environment. The Tekran 2537Xi-IH Industrial Hygiene Monitor provides continual analysis of Hg levels in workplace air in a simple to deploy turn-key unit. This system can be customized according to customer needs including: number of monitoring locations, audible and visual alarms, and site-specific visual ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you