Gas Meters Equipment For Monitoring And Testing Available In Montana
-
ShowcaseManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® In-line flow meter you have the perfect tool for measuring consumption of machines, cost allocation and pressure loss monitoring. The unique design makes this flow meter especially suited for smaller diameters. It is built for small pipes up to ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
U.S. EPA allows critical orifices to be used as calibration standards. This mether calibration set is used for calibrating dry gas meters in order to perform post-test calibration audits. The orifice calibration set contains five of our critical orifices with 1/2″ quick connects and software. Re-calibration recommended annually. Calibration Orifice Set, 6 Calibrated Critical Orifices. and ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The patented* VIP (Vortab Insertion Panel) flow conditioner completely neutralizes flow profile irregularities caused by elbows, valves, blowers, compressors, and other flow disturbances that commonly occur in piping and duct runs and cause flow meter inaccuracies. The VIP provides a swirl-free, symmetric and repeatable flow profile that flow meters require for accurate measurement. Model VIP ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The model W-NK Wet gas meter is a net-volume type integrating flowmeter that employs a drum as the metering element. As the drum is sealed with water or other fluid, the model W-NK provides the measurement of any gas irrespective of the gas specific gravity and viscosity. Further, since this gas meter permits the measurement of very small flows, exhibits high reproducibility, and offers various ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features an integral flow conditioner for installations with limited straight run of piping as well as analog or pulse outputs to totalize gas consumption. Ideal for skid mounted packages where straight run and space are limited. Typical applications include fuel gas flow measurement, compressor leak detection and compressor fuel gas consumption. Wetted parts are 300 series stainless ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our new lightweight and compact external sampling ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The SJH-100 NDIR Infrared Methane Gas Sensor by Cubic detects 0-100% levels of flammable methane gases in ambient ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The High-Temperature Hygronom is also called high-temperature gas analyzer, gas moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, HM-100 high-temperature gas moisture analyzer also can be used in industrial online humidity ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
BPC offers two types of data loggers as well as several in-line sensors, and electronic accessories. All are frequently required for setting up an automated laboratory or a small pilot-scale process monitoring system. Our high-quality instruments offer possibility for a better understanding of fermentation processes, resulting in better process design and optimised process ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GT-Fire is a dedicated hand-held methane detection meter specialized for the fire industry. This user-friendly meter has an ergonomic design coupled with a rugged polycarbonate construction that ensures durability and ease of operation as standard. The GT-Fire allows leak detection to be conducted for flammable (PPM & LEL) gases as well as Carbon Monoxide (CO), Oxygen (O2), and Hydrogen ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Models ST51 and ST51A are a compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
BPC® Go is the next-generation gas volume and flow meter containing an in-built computer to simplify and secure low gas flow measurements. It automatically measures both wet and dry gases at laboratory scale with high precision and accuracy without the need for recalibration. Built to the highest standards of Scandinavian quality, it is simple to set up and use for online, real-time ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features an integrated sensor and circuit board in separate packaging to be used as a portable assembly powered by a 5 to 9 Vdc lithium battery. 12 Vdc battery powered units are also available. Wetted parts are 300 series stainless ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Gain insight into your CO2 consumption. Get insight into your CO2 system, optimize your process, and keep an eye on any leaks or unwanted use. CO2 is widely used in the manufacturing industries. And to reduce CO2 emissions, more applications for CO2 arise every day. Nowadays you can find for instance CO2 being used in breweries, for packaging or for carbonizing soda drinks, in the food industry ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Model XC-523 is a full-feature manual meter console. Designed with a convenient display layout for manual data recording, this Isokinetic XC-523 Source Sampling Console allows the operator to monitor gas velocities, temperatures, and pressures and adjust sample flow rates to maintain isokinetic sampling conditions. The lightweight X-case and compact design allows for easy ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
Continental Controls Corporation’s Gas Substitution System (GSS) is an innovative product that allows diesel engines to operate on a combination of natural gas and other low-cost gases, such as biogas, landfill gas, or digester gas with traditional diesel fuel. The GSS system is designed to provide reliable and efficient combustion control for these blended gases while maximizing fuel ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently the only one, to comply with SIL 2. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2030 Heated Cartridge Sampler allows gold coated sampling cartridges to be heated while they are exposed to a variety of gaseous sample matrices (i.e. ambient air, natural gas, or process gases). The performance of gold adsorbent cartridges is greatly enhanced if the cartridges are heated during exposure. This virtually eliminates problems with condensation of passivation of the ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Gain insight into your oxygen consumption. Get the right O2 flow rate for optimal use and save energy, by getting insight with an oxygen flow meter. Oxygen is used in many industries, from hospitals, to fish farm to mining, from waste water treatment to metal factories, and many more. An oxygen flow meter will provide insight in the total consumption, you can allocate consumption over different ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you