Gas Sampling News

  • Probes For High Temperature & High Dust Load Flue Gases

    The E Instruments 40”(1m) and 60”(1.5m) Inconel flue gas sampling probes with a sintered filter are essential for many combustion applications such as incinerators, coal fired boilers, cement kilns, and steel furnaces that produce flue gases with high temperatures and large amounts of dust, particulates, and ...

  • NEW E9000

    The NEW E9000 emissions analyzer with Heated Sample Line is a complete portable system for EPA compliance level emissions monitoring and testing. The E9000 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion ...

  • DILO supplies equipment for the „SLING“ project

    The Maritime Research Institute Netherlands (MARIN) contracted DILO for the design, construction and installation of a special gas handling plant, as part of a new test facility. MARIN is establishing a new multiphase test facility – unique worldwide – in the framework of the Sloshing of Liquefied Natural Gas (SLING) research project to examine sloshing impacts in LNG tanks. Members ...

  • Gas Sampling Probes for Every Application

    Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...


    By JCT Analysentechnik GmbH

  • Announcing the launch of a new Cryofree cryostat, OptistatDry – the TLEX model for sample-in-exchange-gas applications

    Oxford Instruments is pleased to announce the latest version of their OptistatTMDry, further strengthening their Cryofree® optical cryostat family The new TLEX model provides cryogenic temperatures for sample-in-exchange-gas applications, with top loading sample change. This cryostat is ...


    By Oxford Instruments plc

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Deep Groundwater & Dissolved Gas Sampling with Double Valve Pumps

    Sampling groundwater from deep wells is a challenge on its own, but add to that the need for accurate dissolved gas analysis, and the task gets that much harder. Low Flow, Deep Groundwater Sampling HydroTerra, a leading Australian company, and exclusive distributor of Solinst products, provides environmental monitoring solutions. ...


    By Solinst Canada Ltd.

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • 1,000,000 Gas Detector Tube Sales!

    a1-cbiss has announced that it has hit a company milestone! By reaching more than one million Gastec detector tube sales, the sales milestone comes as a1-cbiss cement their position as the UK’s No.1 distributor and one of the top Gastec distributors worldwide. These sales are spread across 1,000+ companies ...


    By a1-cbiss

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • Extractive solution for measuring gas

    The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during installation. LaserGas R2P is optimized for extractive measurements in controlled environments. These kinds of measurements are typically used within chemical industry, petrochemical industry, ...


    By NEO Monitors AS

  • Genie membrane filters protect against Analyser Liquid damage

    When gas is extracted from a gas field, it requires processing before it can be sold. In the natural gas industries, one of the most important, yet difficult and challenging tasks for process engineering is measuring moisture in a multitude of process gases and liquids. Liquids and moisture will naturally make up a proportion of gas samples. In order to make the gas suitable for sale and use, the ...


    By a1-cbiss

  • GASTEC tubes: Best solution for short-term gas measurement requirements

    The GASTEC detector tubes present superior advantages in comparison to traditional electronic gas detection. They are cost effective, easy to use, do not require calibration and do not require further laboratory analysis. Providing fast & accurate results in the field, GASTEC tubes are ideal for spot ...


    By a1-cbiss

  • ASTM D7758 - 11 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

    Passive soil gas samplers are a minimally invasive, easy-to-use technique in the field for identifying VOCs and SVOCs in the vadose zone. Similar to active soil gas and other field screening techniques, the simplicity and low cost of passive samplers enables them to be applied in large numbers, facilitating detailed mapping of contamination across a site, for the purpose ...


    By ASTM International

  • EPA sampling results announced for capital city Plume Site in Montgomery, AL

    Today, the U.S. Environmental Protection Agency (EPA) announced the sampling results for part of a remedial investigation of the Capital City Plume site in Montgomery, AL. The United States Geological Survey (USGS) and EPA collected samples of indoor air, outdoor soil gas, and an indoor water sample in August 2011 in downtown Montgomery, Alabama, at two locations considered to be potential source ...

  • New detector tube measures lower levels of methylethyl ketone vapors

    Nextteq LLC announces the release of the latest Gastec Detector Tube for Methyl Ethyl Ketone (MEK or 2-Butanone) – Tube No.152L. With a detection range of 3 – 384 ppm, this tube offers the lowest detection limit for a colorimetric tube in the industry.With the ACGIH TLV-TWA set at 200 ppm and the TLV-STEL set at 300 ppm, Tube No. 152L gives you a clear indication of worker exposure concentrations ...


    By Nextteq, LLC

  • Triad expedites brownfields redevelopment in Fairbanks

    The Fairbanks North Star Borough (FNSB) used Triad in 2006-2007 to assess environmental conditions at a municipal property along the Chena River in Fairbanks, AK. FNSB accelerated the site investigation as part of a brownfields assessment grant received from the U.S. EPA in 2005. Low-level contamination had been identified onsite in past investigations, but its extent and impact on future ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you