We couldn't find any gas sampling equipment suppliers or service providers located in Ivory Coast

Here is a list of equipment results with suppliers serving Ivory Coast

Gas Sampling Equipment available in Ivory Coast

  • Gastec - Model 100s - Gas Sampling Pump

    Gastec’s standard GV-100 gas sampling pump is lightweight and rugged. It includes a Thermal Ring for measuring ambient temperature; a flow finish indicator for identifying full and partial pump strokes; the Gastec Handbook containing complete detector tube details; and protective, semi-rigid carrying case.

    By A. P. Buck Inc. based in Orlando, FLORIDA (USA). from Others Product line

  • Model PD Series - Gas Dryers

    Perma Pure PD-Series gas dryers are multi-tube Nafion gas sample dryers designed for high flow, high performance gas drying applications. These dryers can be used to dry to -45°C without removing other compounds. Applications for PD-Series gas dryers include gas sample conditioning for continuous emissions and process monitoring. In these ...

    By Perma Pure LLC based in Lakewood, NEW JERSEY (USA). from Pure Gas Sample Dryers Product line

  • Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19' rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.

    By Protea Limited based in Middlewich, UNITED KINGDOM. from System Solutions Product line

  • Multistream Gas Sampler

    The JAS Multistream Gas Sampler MGS-8 allows unattended- and automated sampling of pressurized gases, stored in canisters, cylinders, sample bombs etc. Sample transfer is carried out via a multi-position valve mounted in a heated enclosure. Connection to the GC can be made by means of a heated transfer line or a 1/16” SS tube (optional ...

    By Joint Analytical Systems Inc based in Newark, DELAWARE (USA). from Sample Introduction Systems Product line

  • Model 49i PS - Ozone Primary Standard

    Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb.The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference ...

    By Thermo Scientific - Air Quality Instruments based in Franklin, MASSACHUSETTS (USA). from Ambient Gas Analyzers Product line

  • Premium

    Model 22162-U - Gas Sampling Bulb

    Gas Sampling Bulb size 250 mL, PTFE stopcock.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA). from Gas Sampling Bulbs Product line

  • Premium

    Model ACCU-FLO - Wellhead

    Prefabricated flow control devices specifically developed for installation on LFG extraction system wells. These easily-installed wellheads incorporate a built-in gas flow measurement device, gas temperature port, quick-connect gas sample and pressure ports, flow control gate valve and flex-hose. Both horizontal and vertical configurations are ...

    By QED Environmental Systems based in Dexter, MICHIGAN (USA). from Landfill Gas Product line

  • Westech - Model M9096 - Gas Sampling Train

    Mini Gas Sampling Train for Low Flow Constant rate Vapour phase Gas with options for Heated Filter Box & Filter. The system can also be used in conjunction with Wesetch’s Standard Manual Stack Sampling Train (MST) for Side Stream Sampling of gases.

    By Westech Scientific Instruments (Westech) based in Upper Stondon, UNITED KINGDOM. from Environmental Instruments Product line

  • GasHawk - Model TX7777 - Personal Gas Monitor

    New GasHawk from Trolex: Gas Detection Done Better. Full 10 day battery life. 1 to 6 gasses. Non-contact charging. Wireless option. Optional built-in pump for confined space sampling.

    By Trolex Limited based in Stockport, UNITED KINGDOM. from Personal and Portable Gas Detection Product line

  • Crowcon - Single Point Sample System

    The single point system is designed to monitor gas samples from pipelines or processes. A powerful high-flow pump extracts and transports gas samples to the system where they are conditioned to remove dust and moisture. The conditioned sample gas is then passed across one and four gas sensors before being either exhausted to atmosphere or returned ...

    By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM. from Sampling Systems Product line

  • Premium

    Tedlar - Model 24654 - Gas Sampling Bag

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under ...

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA). from Gas Sampling Bags Product line

  • Premium

    Model JER - Sampling Pipes and JHD Pre-Filters

    Applications: For extractive gas analysis. For emission and process monitoring. For gas sampling at corrosive process gases. For gas sampling at process temperatures up to 1800°C. For gas sampling at high dust concentrations > 2g/m3. For adaption to all stationary JCT gas sampling probes.

    By JCT Analysentechnik GmbH based in Wr. Neustadt, AUSTRIA. from Gas Sampling Probes Product line

  • Premium

    JCT - Model JH3F - Heated Gas Sample Hose

    Heated sample hoses are used to transport the measured sample gas from the sample probe to the analysis system. The elevated temperature of the hose maintains the integrity of the sample gases without loses due to moisture drop-out or dissolution. The hoses are manufactured using a special heating element that extends the life of the hoses and ...

    By JCT Analysentechnik GmbH based in Wr. Neustadt, AUSTRIA. from Gas Conditioning - Heated Sample Lines Product line

  • Gas Sampling Probes

    Whether with sampling tubes with diameter 10 mm, 8 mm or 6 mm, the B+B Thermo-Technik Gas Sampling Probes gives very fast results. The BlmSchG requested requirement T98 < 50 Sec are  always undercut. Combined with the fast analyse cells standardly used in the Smoke analysing devices, the B+B sampling probes enable a nearly synchronous ...

    By B B Thermo-Technik GmbH based in Donaueschingen, GERMANY. from Gas Sampling Probes Product line

  • Intrinsically Safe Aspirator-Driven Sampler

    The Neutronics Sample Conditioning Package is designed to ensure that the oxygen sensor always has a clean, dry sample gas for accurate measurement. Process conditions that include corrosive chemicals, temperature extremes, and powders present signi#31;cant challenges. To deliver accurate and reliable gas measurement, sensors require a sample that ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from Gas Analysis- Sample Conditioning Systems Product line

  • Gas Sampling Bags

    The most significant improvement in bag valves yet conceived, is the patented BGI 'SWIVEL LOCK'. Its unique stainless steel construction, absolutely prevents leakage to the ambient environment. Other valves have the potential of leaking in the filling or emptying position. Any standard 1/4 inch I.D. Tubing is compatible with the barbed fitting on ...

    By Tisch Environmental Inc. - Tisch International based in Cleves, OHIO (USA). from Gas Sampling Bags Product line

  • AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

    MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

    By AGT Thermotechnik GmbH & Co.KG based in Erkelenz, GERMANY. from Sample Gas Product line

  • Sentry - Model MLG - Gas Sampler for Liquefied Gases

    LPG and Liquefied Gas Sampler for accurate samples of gas and two-phase liquids; Flow-through design assures representative sample. Tandem switching valve integrates multiple functions into one device. Self-sealing quick disconnects for easy removal and transport of sample cylinder. Various volume-reduction methods to meet regulatory 'maximum fill ...

    By Sentry Equipment Corp based in Oconomowoc, WISCONSIN (USA). from Gas Samplers for High Vapor Pressure Gases/Liquids Product line

  • Premium

    JCT - Model JES301 - Heated Gas Sample Probe

    The JCT model JES301 heated gas sample probe is used for the extraction and filtration of sample gases for use in continuous measurement analysis systems. The probe is available in heated and unheated versions and has a comprehensive range of sampling tubes including a specific filter tube for extremely high dust loads. The JES 301 is ...

    By JCT Analysentechnik GmbH based in Wr. Neustadt, AUSTRIA. from Gas Sampling Probes Product line

  • Premium

    Automated Extraction Monitoring System (AEMS)

    The AEMS continuously monitors gas sample for methane content allowing verification of Greenhouse gas destruction for Carbon Credits (CERs). Using the latest computer and software technology, the Single Point AEMS is typically installed on a main header line before an engine or flare. It collects a wide range of data from equipment such as flow ...

    By QED Environmental Systems based in Dexter, MICHIGAN (USA). from Landfill Gas Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you