Gas Sampling Equipment For Monitoring And Testing Available In Lithuania
-
ShowcaseManufactured by IMR Environmental Equipment, Inc.based in USA
The IM 1120 Flue Gas Analyser with its new, innovative HMI concept is controlled via the IM-Smart app and ensures simple operation, handling and evaluation for the user. Free IM-Smart app for remote operation of the IM 1120 with a tablet or smartphone. Various measurement modes with report generating function are available: Flue gas analysis - Differential Temperature - Oxygen Gap - CO Ambient - ...
-
ShowcaseManufactured by Cerex Monitoring Solutions, LLC.based in USA
Measurements: The UV Sentry is a parts per billion (ppb) to percent level chemical detection and quantification open-path UV-DOAS analyzer. It offers high-performing, time-resolved monitoring of a variety of regulated ...
-
ShowcaseManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 899 Y analyzer is the next generation in high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 899 Y is modular designed and capable of detecting lowest quantities of NO, NOx and NO2 in the range of parts per trillion. The new and intuitive graphical user interface “GUI“ also individually displays and connects to other instruments’ ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Siloxane monitor is designed to output a total siloxane concentration in mg/m3 in gases derived from waste water treatment, food waste digestion and landfills. Understanding the levels of Siloxane in the gas allows operators to manage gas clean up systems such as activated carbon filters and regenerative filter systems. The monitor provides assurance to those exporting gas to grid that ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
The High-Temperature Hygronom is also called high-temperature gas analyzer, gas moisture meter or dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, HM-100 high-temperature gas moisture analyzer also can be used in industrial online humidity ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The ECO PHYSICS analyzer nCLD 88 offers precise measurement of nitric oxide. The extremely high sensitivity and fast response time of the NO-analyzer allows the detection of concentrations in the range of parts per trillion. Ease of use guarantee flexibility for standard applications as well as scientific research. In combination with the liquid purge vessel the nCLD 88 measures nitrites, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-1E Global Air Sampling System is a microprocessor controlled low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an inline orifice by varying the flow through a bypass valve into the pump. This system allows the pump to ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 CMhr analyzer is the next generation in high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 CMhr is modular designed and capable of simultaneously measuring NO, NO2, NOx, NH3 and NOx-amines from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 811 M is the next generation in two-channel emissions monitoring instrumentation. Unique in speed and reliability, the nCLD 811 M is modular designed and allows the continuous and simultaneous analysis of NO, NO2 and NOx in raw exhaust gasses with NOx concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 64 can measure oxygen concentrations in the smallest traces, even down to the minimal measuring range of 0...10 ppm. This is most relevant in air separation plants, in the technical gas production, and welding of high-alloy steels, titanium, and the like under a protective atmosphere. Further applications are realized in hardening shops, in the chemical industry, and in the food ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethylene glycol that retain the ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 SSdhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 SSdhr is modular designed and capable of directly and simultaneously measuring NOX in rough samples from two hot and moist sources without additional gas preconditioning unit. The new and intuitive graphical user interface also individually ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This UV Flux 25% Oxygen Sensor measures ambient oxygen levels using the principle of florescence quenching by oxygen. This provides the benefits of lower power requirements and a longer lifetime. The UV Flux MX board provides pressure, temperature and humidity compensation, enabling accurate operation over a wide environmental range without the need for additional system ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition and control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector output and calculate final ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mr analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mr is modular designed and capable of simultaneously measuring NO, NOx and NO2 from sources with pressure variations. It features a dual inlet option for assessing two different sources at once. The new and intuitive graphical user interface ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you