Gas Sampling Equipment available in Lithuania

Available in Lithuania| Near Lithuania
310 Results found

We couldn't find any results in Lithuania

Here is a list of results available in Lithuania

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Sampling ×

  • Available in: Europe ×

  • Available in: Lithuania ×

Model PD Series - Gas Dryers

by Perma Pure LLC     based in Lakewood, NEW JERSEY (USA)

Perma Pure PD-Series gas dryers are multi-tube Nafion gas sample dryers designed for high flow, high performance gas drying applications. These dryers can be used to dry to -45°C without removing other compounds. Applications for PD-Series gas dryers include gas sample conditioning for continuous emissions and process monitoring. In these ...

Gastec - Model 100s - Gas Sampling Pump

by A. P. Buck Inc.     based in Orlando, FLORIDA (USA)

Gastec’s standard GV-100 gas sampling pump is lightweight and rugged. It includes a Thermal Ring for measuring ambient temperature; a flow finish indicator for identifying full and partial pump strokes; the Gastec Handbook containing complete detector tube details; and protective, semi-rigid carrying case.

Pico - Model PVS 150 K - Volume Gas Sampler

by Atmoservice     based in Poznan, POLAND

Pico volume gas Sampler PVS 150 K is designed to take gas sample in two parallel and independent sampling channels. Each sampling channel is equipped in independent pump and measuring system. Programming of sampler is realized separately for both channels. Each of sampling channel is equipped in easy replaceable dryer cartridge to protect device ...

Neutronics Vapor, Mist & Condensation Removal for Gas Sample Conditioning

by Neutronics, Inc     based in Exton, PENNSYLVANIA (USA)

Neutronics offers a comprehensive line of Gas Sample Conditioning components that prevent process vapor, mist and condensed liquid from deteriorating oxygen sensor accuracy and reliability. When the sample is equal to or above ambient temperature, our Vapor Condenser may be used to remove vapor and condensate. For elevated sample temperatures with ...

Model 49i PS - Ozone Primary Standard

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

Using UV Photometric technology, the Model 49i-PS is able to produce ozone at a rate of up to 5000 ppb.The Model 49i-PS is a dual cell photometer, the concept adopted by the NIST for the national ozone standard. The Model 49i-PS can operate with ozonator flow rates of up to 6 liters a minute. Because the instrument has both sample and reference ...

Multistream Gas Sampler

by Joint Analytical Systems Inc     based in Newark, DELAWARE (USA)

The JAS Multistream Gas Sampler MGS-8 allows unattended- and automated sampling of pressurized gases, stored in canisters, cylinders, sample bombs etc. Sample transfer is carried out via a multi-position valve mounted in a heated enclosure. Connection to the GC can be made by means of a heated transfer line or a 1/16” SS tube (optional ...

Sample Gas Probes

by Bühler Technologies GmbH     based in Ratingen, GERMANY

A comprehensive range of advanced sample probes in a modular design. Heated or non heated, up-stream or down-stream filters, also for hazardous areas.

Model ACCU-FLO - Wellhead

by LANDTEC     based in Dexter, MICHIGAN (USA)

Prefabricated flow control devices specifically developed for installation on LFG extraction system wells. These easily-installed wellheads incorporate a built-in gas flow measurement device, gas temperature port, quick-connect gas sample and pressure ports, flow control gate valve and flex-hose. Both horizontal and vertical configurations are ...

Model BF2-S - Self-Cleaning Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Using the cross flow (inertial) principle, this filter is an alternative to traditional filters. Filter of this type provide the lowest maintenance cost and longest life of any filter technology. A grooved core is pressed into a filter element made of sintered stainless steel. The main sample gas stream enters the groove from the top and spins ...

Model 22161 - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 125 mL, PTFE stopcock.

Tedlar - Model 24634 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

Model MGK 744 - Sample Gas Preparation Unit

by Pronova Analysentechnik GmbH & Co. KG     based in Berlin, GERMANY

Conditioning of the sample gas using extractive measurements for precise analysis. The MGK 744 is enclosed in a half-sized 19' housing. It is capable of cooling, delivering and filtering the sample gas as well as automatically removing condensation.

Westech - Model M9096 - Gas Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

Mini Gas Sampling Train for Low Flow Constant rate Vapour phase Gas with options for Heated Filter Box & Filter. The system can also be used in conjunction with Wesetch’s Standard Manual Stack Sampling Train (MST) for Side Stream Sampling of gases.

GasHawk - Model TX7777 - Personal Gas Monitor

by Trolex Limited     based in Stockport, UNITED KINGDOM

New GasHawk from Trolex: Gas Detection Done Better. Full 10 day battery life. 1 to 6 gasses. Non-contact charging. Wireless option. Optional built-in pump for confined space sampling.

Model EGK 10 - Sample Gas Cooler

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Accurate measurements of gases require gas samples with stable dew points even under harsh ambient conditions. The EGK10 is designed for high flow applications. The heart of any cooling system is the cooling block. The EGK 10 gas cooler features a cooling block made of aluminum which accommodates a highly efficient stainless steel heat exchanger. ...

Bühler - Model AGF - PV - 30 - Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyzer. TheAGF-PV-30with the Buhler Unique QC bracket provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.

Crowcon - Single Point Sample System

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

The single point system is designed to monitor gas samples from pipelines or processes. A powerful high-flow pump extracts and transports gas samples to the system where they are conditioned to remove dust and moisture. The conditioned sample gas is then passed across one and four gas sensors before being either exhausted to atmosphere or returned ...

Model TQ 4300 - Multi Gas Sampling System

by TQ Environmental Plc     based in Wakefield, UNITED KINGDOM

Designed for both industrial and commercial use. The TQ 4300 system can monitor up to 4 different gasses simultaneously, including; Carbon Dioxide, Freon’s and Ammonia or any combination of these gasses, using our Infra-red gas analysers. In addition we can expand the system to provide individual zone alarm outputs for all 16 sample points, ...

GDS - Model 305 - Sequential Gas Sampling System 1-48 Way

by GDS Technologies Ltd.     based in West Yorkshire, UNITED KINGDOM

Sequential Gas Sampling System 1-48 Way; 1-48 sample points.Monitor up to 8 gas types. No sample line purge delay. Wide range of sensor types. 4 line alpha/numeric display. Selectable sample line sequence. Display of each sample line location. Easily installed and maintained. Full indication of all operations. Event logging / Modbus / RS232 / ...

Model AHF - 22 - Heated Sample Gas Filter

by Bühler Technologies GmbH     based in Ratingen, GERMANY

The traditional design of heated particulate filters requires considerable maintenance and down time due to the work required to change the filter media. Buhler's AHF-22 incorporates a new advanced design that eliminates much of this work and sets new standards for ease and speed of maintenance. A spent filter can be changed in seconds and does ...

Need help finding the right suppliers?

Let the XPRTs do the work for you