Gas Conditioning (Gas Sampling) Equipment Available In Lithuania
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Gröger & Obst Vertriebs- und Service GmbHbased in GERMANY
Achieve perfect measurement results in emission analysis by optimizing the processing of the gas to be analyzed with the patented GOT 100 measuring gas treatment system. The GOT 100, your complete solution in emissions analysis. Effective combination of Peltier coolers with cyclone heat exchangers (patent No. DPB 38 33 192), filters and ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Wuhan Tianyu Intelligent Control Technology Co., Ltd.based in CHINA
Sampling gas usually contain impurities such as dust, liquid water and tar, some of these impurities could pollute the gas sensor if sampling gas was not pre-treated before entering into the analyzer. It could shorten lifetime of the instrument, even breakdown the instrument. And thus, it’s important to use gas ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The Ankersmid digital gas conditioning system is a compact, • low-maintenance, self-monitoring and completely equipped units is suitable for variable and continuous operation in most ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions. The heated sample line is to be mounted at the gas measuring inlet terminal inside the portable case. ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by Envirabased in SPAIN
The probe ASP 320 has been designed for the continuous sampling of gas in denitrification processes (DeNOx) where ammonium compounds (NH3) are added to reduce the content of nitrogen ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Electric gas cooler type ECP1000-SS with Peltier element, electronically regulated to +5 °C, high/low-temperature alarm with 2 changeover contacts, jet-stream heat exchanger out of SS 316 Ti for 1 x 150 Nl/h, connections: sample gas: G 1/4" i, condensate: G 3/8" female, power: 230 V/50 Hz or 115 V/60 Hz to switch over. One gas path, max. ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Electric gas cooler type ECP1000-G with Peltier element, electronically regulated to +5 °C, high/low-temperature alarm with 2 changeover contacts, Jet-Stream heat exchanger made of Duran glass for 1 x 150 Nl/h, connections: sample gas: GL18-6 mm, condensate: GL 25-12 mm, power: 230 V/50 Hz or 115 V/60 Hz to switch over. One gas path, max. ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For adjustment and monitoring of sample gas flow. For adjustment and monitoring of bypass and calibration gas flow. For integration in gas analysis ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications; For extractive gas analysis. For emission and process monitoring. For transport of sample gas from sample point to analysis system. To stay safely above the acid dew point. For protection against measured value falsification and frost. For indoor and outdoor use. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you