Sampling Bag (Gas Sampling) Equipment
-
Manufactured by CEL Scientific Corporationbased in USA
CEL Scientific Kynar gas sampling bags are made of 3mil or 4mil Kynar PVDF (PolyVinyliDene Fluoride) film. Kynar is transparent, tough, durable, and has excellent chemical resistance because of its unique properties. We can offer Kynar bags in all sizes up to 1000L. All of our stock bags feature an eyelet and our patent-pending ...
-
Manufactured by Analytical Specialties, Inc.based in USA
This innovative change to sampling bag design allows for total evacuation of a sample bag. The Krinkle bags eliminate the need for extensive fitting configurations without concerns about dead air space created by special fittings. The Black Krinkle bags are light ...
-
Manufactured by Tisch Environmental Incbased in USA
on the valve. Due to the single barb design, a 1/4 inch compression fitting may also be utilized. The removal of a gas sample from a filled bag can be difficult to accomplish without contamination from the ambient environment. This may now be accomplished with complete confidence by using the BGI Zero Head Space ...
-
Manufactured by Jensen Inert Productsbased in USA
ALTEF is a proprietary fluoropolymer film devel oped specially for the air sampling market.ALTEF meets or exceeds many of the desired characteristics of Tedlar at a significantly lower ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Polyvinylidene Difluoride, or PVDF is a highly non-reactive and pure thermoplastic fluoropolymer. Analytical Specialties is pleased to announce the formal introduction of our line of Kynar® film Sampling Bags. The development of this film began many years ago when the automotive industry realized that the present film specified in the ...
-
Manufactured by CEL Scientific Corporationbased in USA
2-in-1 fittings available in polypropylene (left), stainless steel (middle), and PTFE (right). New design fully automatic vacuum air sampling box is available to order NOW!, CEL Scientific gas sampling bags are made of DuPont's 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide ...
-
Manufactured by Analytical Specialties, Inc.based in USA
DuPont Tedlar, a good choice for your sampling bag needs. Tedlar bags are tough, chemically inert, low permeability and re-usable when purged with nitrogen before each re-use. This re-use property makes Tedlar sampling bags very economical. Rated for continuous use up to 225° F when used with the ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Fluropolymer (FEP) Film | Fluropolymer (FEP) Gas Samplign Bags. The most inert material available for storage of samples available, Fluropolymer's (FEP) only drawbacks are permeability and cost. Fluropolymer (FEP) offers the highest use temperatures of all the sampling materials from -400°F to +400°F. FEP type, -400°F to ...
-
Manufactured by Adtech Polymer Engineeringbased in UNITED KINGDOM
Tedlar® gas sample bags are generally used for gas, odour and automotive emission sampling for VOC’s. Tedlar® film is tougher and more economical than FEP and is commonly used in vehicle emission testing. Our gas sampling bags are manufactured in a range of standard sizes, from 1 to 300 litres, and ...
-
Manufactured by Analytical Specialties, Inc.based in USA
Double Weight, Aged Saran Bags: These Saran Gas Sampling Bags are made of a double weight, 2 mil (0.002 inch) thick type 18-100 Saran, specially treated to minimize permeability. Our Saran Gas Sampling Bags are as chemically inert as Teflon Bags, but are less ...
-
Manufactured by Calibrated Instruments, LLCbased in USA
The construction and materials of Cali-5-Bond™ gas sampling bags ensure the physical integrity of any sample taken, it remains truly representative of its collection environment or medium conditions. Cali-5-Bond™ bags allow all samples to be stored without change over ...
-
Manufactured by Jensen Inert Productsbased in USA
Prices include Locking Combo Valve with septum. Bags with grommets available. 3/16' OD stem for use with most 1/4' OD plastic and fluropolymer tubing. Bags with multiple fittings available. Swagelok® PTFE and other fittings available upon ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our ready-to-use sample bags have been designed to meet the quality requirements of EN 13725, to minimise the risk of contamination of odour samples. Olfasense’s sample bags are made of Nalophan® and PTFE tubing to minimise surface reactions with sulphurs. Within the ISO 17025 accreditation scope, the ...
-
Manufactured by Sigma-Aldrichbased in USA
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the ...
-
Manufactured by Sigma-Aldrichbased in USA
Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you