Sampling Pump (Gas Sampling) Equipment Available In Ivory Coast
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
AMI has developed a Class 1, Div. II Group C,D Sample Pump Module suitable for a wide range of previously impossible applications. Our high quality pump uses a unique diaphragm that diffuses less than 0.5ppm of oxygen while drawing from pressures as low as 14”Hg. It pushes the sample gas through the trace oxygen analyzer ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2113 sample pump accessory is available for end users of gas analysis equipment who need to draw a sample of gas from their ...
-
Manufactured by Beijing Shi’An Technology Instrument Co., Ltdbased in CHINA
4000ml/min, super large power suction ability. Universal for any portable gas detectors. Independent rechargeable battery. 4 LED battery indicators. 1.2m rubber hose. Detect target gas as far as 30 meters. Optional: Dust proof ...
-
Manufactured by SKC Asia HSE Sampling Technologies Pte Ltdbased in SINGAPORE
Discover the perfect combination of features and power in this compact, lightweight pump that gets the job done. The AirChek® XR5000 personal air sampling pump with Li-Ion battery provides powerful flows for particulate sampling, low flows for gas and vapor sampling, and the long run-times for ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
AMI has developed a Class 1, Div. II Group C,D Portable Sample Pump Module suitable for a wide range of previously impossible applications. Our high quality pump uses a unique diaphragm that diffuses less than 0.5ppm of oxygen while drawing from pressures as low as 14”Hg. It pushes the sample gas through the trace oxygen ...
-
Manufactured by Gastec Corporationbased in JAPAN
The Gas sampling pump GV-100, pump accessories (3 rubber inlets and lubricant), as well as the instruction sheet are provided in a convenient shoulder ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis For emission and process monitoring For continuous pumping of sample gas For installation in gas analysis systems Suitable for mobile devices Applicable for long tube and hose ...
-
Manufactured by SKCbased in USA
Reliability and simplicity make the SKC Sidekick a good entry level pump, whilst high build quality means it won't let you down. Available in three models including two ATEX approved models. All models offer a wide flow range of 5-3000 ml/min, which means the Sidekick is suitable for dust and gas sampling projects. The lower flows are ...
-
Manufactured by Gastec Corporationbased in JAPAN
The passive dositube can then be positioned in the worker's breathing zone where it can be attached with a holder and collar clip (separately available : Art.No.710) and the amount of individual exposure can be ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i, Power: 230V/50Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For switching over of several measuring points to one analyser. For "hot gas" analysis, e.g. with ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i. Power: 115V/60Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
at low sample gas quantities. For dilution of the water vapour concentration for humidity measurements with IR analysers. Also applicable as eductor ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For continuous pumping of explosive sample gas. Certified for gases of group II B +H2 and up to temperature class T4. For installation in ex-zone 1 or 2. Applicable for long tube and hose ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Analytical bellows sample pump MP-F05, material: PTFE, capacity: 320 Nl/h with counter-pressure of -/+ 50 mbar on the vacuum and pressure side, connections: G 1/4" f, 230 V/230 V/50/60 Hz, IP54. Capacity: 5 Nl/min (320 Nl/h) with a counter-pressure of -/+ 50 mbar on the vaccuum and pressure side , power: 115 V/60 Hz or 230 V/50 ...
-
Manufactured by M&C Tech Groupbased in GERMANY
Analytical bellows sample pump MP-F05, material: PTFE, capacity: 320 Nl/h with counter-pressure of -/+ 50 mbar on the vacuum and pressure side, connections: G 1/4" f, 115 V, 50/60 Hz, IP54. Capacity: 5 Nl/min (320 Nl/h) with a counter-pressure of -/+ 50 mbar on the vaccuum and pressure side , power: 115 V/60 Hz or 230 V/50 ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet Multipoint Sampling System (MSS) is designed for online monitoring of multiple measuring points. The Gasmet MSS consists of a wall-mounted stainless steel case which includes all valves, flow meters, and pump. Standard setup includes one pump with four (4) sample gas input line, but up to 32 lines can be added according to ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
These micro gas sampling pumps are designed to provide a constant flow of air across any of our sample draw sensors, or sensors with tube cap kits. This makes them perfect for bench-top testing of sensors for closed-loop sampling ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are all located in a module ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you