Stack Monitor (Gas Sampling) Equipment
-
Manufactured by Drop Enviro Engineers & Servicesbased in INDIA
Stack Sampler is a basic instrument used for Particulate matters (PM) under Isokinetic conditions and gaseous pollutants in flue gas emitted from the stack/chimney. Offered range is designed and manufactured as per the set industry norms using quality approved components with the help of advanced ...
-
Manufactured by VayomTechbased in INDIA
VYOMTECH STACK MONITORING KIT VTSS1 is scientifically designed instrument. It can be used to measure total emission of Particulate Matter and Gaseous Pollutants from all types of industries including Thermal power stations, Steel Plants, Chemical Plants and Cement Industry. Our Stack Monitoring Kit VTSS1 can be used to take ...
-
PremiumManufactured by ENVEAbased in FRANCE
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger ...
-
Manufactured by Euro Tech (Far East) Ltd.based in CHINA
The heated sample extraction gas conditioner of ET3900 is designed for continuous extraction of gas from a process or exhaust stream; stack testing and process monitoring. The heated probes heat the gas sample and keep it hot to eliminate condensation. ET3900 flue gas pretreatment instrument by heated sampling probe, composition and the ...
-
Manufactured by EcoChem Analyticsbased in USA
The MC3 is a multicomponent IR gas analyzer that is specifically designed for continuous monitoring of a flue gas stream. The infrared optical bench, sample cell and control components are all integrated into one convenient, and easily serviced ventilated ...
-
Manufactured by PCF Elettronica S.r.l.based in ITALY
Modular turnkey automatic industrial systems for sampling, conditioning and monitoring industrial stack/ducts. All the integrated analyzers are EPA and TUV ...
-
Manufactured by Ultra Electronics Nuclear Control Systemsbased in UNITED KINGDOM
The Gaseous Sample & Return Probe provides a simple solution for gas sample extraction from a stack/duct. The Ultra Universal Mounting Flange offers a standard mounting arrange for any type of stack diameter or geometry. As the sample and return probe is a single piece, it can be easily installed in the stack with a minimum of effort, ...
-
Manufactured by Woori Environmental Technology Co, Ltd.based in SOUTH KOREA
Certified optical transmission monitor to measure the opacity or dust concentration of sample gas. Suitable for plants which require the monitoring of dust missions by law. Two freely configurable analogue outputs allow monitoring of opacity and dust concentration values at the same ...
-
Manufactured by Woori Environmental Technology Co, Ltd.based in SOUTH KOREA
Extractive dust monitor for wet sample gas to monitor low to medium dust ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
OMA-100 Gas Online Analyzer(SO2,NO,CO,CO2,O2,CH4,H2,C2H2,CnHm,calorific value). OMA-100 gas online analyzer is a new generation of online gas analyzers which was independently developed based on the world's leading non-dispersive infrared gas analysis technology. It adopts a half-air chamber gas circuit design, with higher measurement accuracy, lower drift, and less influence from external ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High-performance analysis of total hydrocarbons (THC), methane (CH4) and non-methane hydrocarbons (NMHC). The SERVOPRO HFID heated total hydrocarbon analyzer utilizes a highly sensitive Flame Ionization Detector (FID) for measuring volatile hydrocarbon concentrations in vehicle/engine certification testing and industrial gas stack ...
-
Manufactured by AMS Nuclear Engineering Ltdbased in UNITED KINGDOM
Sometimes referred to as Total Oxidation Units (TOU), these mobile samplers oxidize the sample gas within a reaction tube in a heated environment before flowing through, up to three, bubbler sample bottles. The sample pressure and temperature is displayed along with the mass flow rate and total for data gathering by operators. To enhance longevity, Type N thermocouples are used to control the ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and ...
-
Manufactured by Xi`an Dingyan Technology Co., Ltd.based in CHINA
Continuous Emission Monitoring System is applied to monitor emission of chimney in industrial pollution sources. The measuring components include SO2, NOx, O2, dust, humidity, temperature, pressure, flow velocity,etc.Stack emissions testing have obtained CCAEP certification from China Environmental Protection Ministry and a number of ...
-
based in CANADA
Spectra-1 Extractive gas monitor features the same gas analysis software as used by the open path Spectra-1 monitor. Tuneable Diode Laser Absorption Spectroscopy (TDLAS) based gas sensing. Closed path internal multi-pass sampling cells are used instead of an open path configuration to calculate gas concentrations. 19' rack mounted design. ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to be easy to move it with just two ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
We offer a complete solution for continuous emission monitoring, utilising the extractive dilution monitoring method. With over 30 years of experience in the design, construction, installation, commissioning and maintenance of Continuous Emission Monitoring Systems (CEMS), you can rely on us for your CEMS ...
-
Manufactured by Cemtek KVB-Enertecbased in USA
For monitoring NH3, HCl, O2, CO, H2O, HCN, H2S, CO2, CH4, HF, NO, HDO, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you