Gas Sampling Equipment For Monitoring And Testing
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
In environmental monitoring as well as in process and quality control, the determination of organic halogens which can be adsorbed by activated charcoal is very important for the evaluation of water and waste water. With the multi X 2500, Analytik Jena provides a flexible, future-oriented system for sum parameter analysis that meets the requirements of every modern ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CO analyzer adopts non-dispersive infrared spectrum and combines with advanced microprocessor technology. It provides accurate and reliable detection of CO at ppm level to meet the requirement of ambient gas monitoring.The principle is non-dispersive infrared based on gas filter correlation technology. CO molecule absorbs specific infrared light which is consistent with Beer-Lambert principle. CO ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. Unique optical architecture. Comprehensive software ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 Mhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 Mhr is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface “GUI“ also individually displays and connects to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The Cubic CU-SJH-5 Infrared Methane Gas Sensor detects 0-5% levels of flammable hydrocarbon methane gases in ambient ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD AL is the next generation in one-channel high precision ambient air monitoring instrumentation. Unique in speed and reliability, the nCLD AL is modular designed and capable of sequentially measuring NO, NO2 and NOx. The analyzers expandable capabilities allow assessment of additional nitrogen based parameters. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mh analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mh is modular designed and capable of simultaneously measuring NO, NOx and NO2 from hot and humid gas sources without additional cooler. It features a dual inlet option for assessing two different sources at once. The new and intuitive graphical ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The Cerex UV SENTRY is an open-path gas analyzer that specializes in sensitive detection of key hazardous emissions such as Benzene and Chlorine over 1000+ meters of fence-line paths. It sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fence lines, around process units, and around tank farms. As the most cost-effective solution ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This UV Flux 25% Oxygen Sensor measures ambient oxygen levels using the principle of florescence quenching by oxygen. This provides the benefits of lower power requirements and a longer lifetime. The UV Flux MX board provides pressure, temperature and humidity compensation, enabling accurate operation over a wide environmental range without the need for additional system ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a pre-set activation time, a pre-set delay interval, the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-150 is a multi-channel type tunable laser gas analyzer based on TDLAS technology. It consists of central control unit and measuring probe. Supporting up to 8 measuring probe, a central control unit controls each measuring probe, processes data received and communicates through network. It supports 19" panel mounted and wall mounted ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Key Features: Class 1 Div 2 cabinet for use in hazardous environments. ASTM-6350 and ISO-6978 method compliant. Dual-bed gold sample trap design avoids analytical gold cartridge exposure to complex sample gas. Multiple automated QA routines validate method performance. Range of 1 ng/m3 to 2 mg/m3. Network enabled for remote operation. Cabinet integration and design by Tekran Partner: Orbital Gas ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD EL2 analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD EL2 is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface also individually displays and connects to other instruments’ ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet Multipoint Sampling System (MSS) is designed for online monitoring of multiple measuring points. The Gasmet MSS consists of a wall-mounted stainless steel case which includes all valves, flow meters, and pump. Standard setup includes one pump with four (4) sample gas input line, but up to 32 lines can be added according to customer need. Additionally, a second sample gas pump can be added ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 Mr analyzer is the next generation in high precision two-channel nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 Mr is modular designed and capable of simultaneously measuring NO, NOx and NO2 from sources with pressure variations. It features a dual inlet option for assessing two different sources at once. The new and intuitive graphical user interface ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you