Gas Transmitters Equipment For Monitoring And Testing Available In Burkina Faso
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
With a two wire design and intrinsically safe housing the product is easy to install and suitable for general industrial applications. The unique electrical design of the 5000 transmitter and sensor virtually eliminate false alarms due to RFI/EMI sources. By combining advanced sensor technology with common electronics and a common user interface across all configuration, Freedom 5000 helps users ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The MGS-550 can easily be connected to any central BMS control system (via Modbus connection) or, with its three onboard user-assignable relays, can easily function as a stand-alone unit without the need to wire alarm devices back to a central system. Providing the ultimate in flexibility, the instrument can be upgraded at any time from a one-sensor unit to a two-sensor system by simply ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000 laser gas analyzer uses TDLAS technology and long-path reflection technology, which greatly improves the detection limit. It can analyze O2 , CO2, NH3 , CO , CH4, H2O, HCl, HF, etc, providing a new solution of online measurement of trace gases for natural gas, petrochemicals, environmental protection and steel and other ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
The DEGA NSx-yL III gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
-
Manufactured by Armstrong Monitoring Corporation (AMC)based in CANADA
A compact system for up to four sensor/transmitters, the AMC-1400 monitoring panel provides features normally found in much larger, more expensive packages. An easy to read vacuum fluorescent display provides continuous gas concentration and alarm indication for each of four sensors. Housed in a fiberglass enforced polyester enclosure, the fully programmable AMC-1400 is designed to permit the ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI’s Series B14 Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They’re ideally suited for use with ATI’s Series A12 or B12 two-wire toxic gas ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
-Universal transmitter connects to toxic and corrosive gas sensors -2 alarm relays with signal to horn/strobe, building systems, etc. -Built-in audible horn and visual alarms with bright LED’s -4-20mA analog output -24/7 Supervised electronics continuously checks sensor and system status -Low-cost long life renewable sensor, $35 per recharge -Quick gas calibration with a push of a button ...
-
Manufactured by Euro-Gas Management Services Ltdbased in UNITED KINGDOM
Weight: 5g (approx). Housing Material: Noryl 110. Storage Life: 6 months in sealed container. Storage Conditions: +10°C to +30°C. Orientation: Any. Warranty Period: 18 months from date of ...
-
Manufactured by Uniphos Envirotronic Pvt. Ltd. (UEPL)based in INDIA
KwikSense Smart Gas Transmitters are universal transmitters with plug & play sensor technology. They are capable of accepting more than 100 smart gas sensors. Its non-intrusive calibration helps customers to calibrate the transmitters in hazardous area without opening the transmitter thus reducing the down time for calibration. Alternatively the smart gas sensors can be plugged out and calibrated ...
-
Manufactured by ENMET, LLCbased in USA
The CD-1300-ST Sensor/Transmitter is easy to install and maintain. The output signal is 4-20 mA or an optional 0 to 10 volt interface. The isolated power supply eliminates any ground loop or electrical interface problems when multiple units are connected to the same controller. Low power consumption makes the CD-1300-ST suitable for battery-powered applications. Features include a bright ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Commercial and Light Infrastructure Gas ...
-
Manufactured by ExTox Gasmess-Systeme GmbHbased in GERMANY
Transmitter for measurement of ammonia in fluid mediums, for example in cooling soles, with integrated display for indication of measured values and relays outputs for Alarm and ...
-
Manufactured by ExTox Gasmess-Systeme GmbHbased in GERMANY
There are multiple tasks which need to be fulfilled when monitoring gases and vapours. TheThere are multiple tasks which need to be fulfilled when monitoring gases and vapours. Therange covers the opportune warning before it comes to the release of flammable substances,monitoring of concentrations of toxic gases at working places as well as controlling of productionprocesses. Due to modern sensor ...
-
Manufactured by Intec Controlsbased in USA
Toxic and combustible gas sensors for hazardous locations. Standard features include 4-20 mA output, RS-485 serial communications (DGC6 and standard Modbus-RTU protocols), alarm relay and fault relay. Optional bi-color LCD display. Available with any SSAX1-Series toxic or combustible gas sensor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you