Gas Warning Systems Equipment For Monitoring And Testing In Finland
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 100 – 3,500 g/h of chlorine. Chlorine gas in the vacuum process PLUS production of sodium hypochlorite solution with the electrolysis system CHLORINSITU V Plus. Chlorination and pH value adjustment from a single ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 100 – 10,000 g/h of chlorine. Ultra-pure or low-chloride and low-chlorate sodium-calcium hypochlorite requires specialist system technology. The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the simultaneous analysis of the zero gas and ordinary time ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 100 – 3,500 g/h of chlorine. Ultra-pure active chlorine gas is generated in a vacuum process using the electrolysis system CHLORINSITU V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The EX-TEC PM 400 is a mobile gas warning device that reliably warns plumbers, staff from utility companies, network operators, fire services and other technical staff of dangerous gas concentrations. The compact device is available with various sensors and, even in its most basic version, allows you to monitor flammable gases. The range of gases that can be detected make the EX-TEC PM 400 ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Test set SPE for testing and adjustment of SEWERIN measuring devices. With regard to operational safety, test technology continues to grow in importance. The DVGW (German Technical and Scientific Association for Gas and Water) Code of Practice G 465-4 describes the tests required for various device classes. The Sewerin test sets take these circumstances into account. For example, all test sets ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Detecting, measuring and warning - Everything you need. Portable gas concentration measuring device for detecting, measuring and warning. The mobile gas measuring and gas warning devices from the EX-TEC PM 5xx series make the everyday work of gas fitters, maintenance staff and other technical staff easier. They can be used to locate leaks in freely accessible gas pipes, assess the risk of ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas warning device with catalytic sensor and nonane certification. The Multitec 410 is the latest addition to the Sewerin range of multiple gas warning devices. Unlike the Multitec 5xx devices, the Multitec 410 has a catalytic sensor, also known as a catalytic combustion sensor, for measuring flammable ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The test sets to gas concentration measuring and gas warning devices of the EX-TEC PM 5xx/400 series. The test sets ATS 503 and ATS 501 can be used to carry out device inspections and adjustments to gas concentration measuring devices EX-TEC® PM 580, 550, 500 and 400 reliably and extremely ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Particularly when working in pits, preventative measurement of dangerous gases is essential to survival. To establish if the pit is safe to work in, the floating probe is used to take measurements at the bottom of the pit before entering. This ensures the safety of all workers. With the Multitec 520, six gases can be measured simultaneously. For this reason, this gas warning device can be used ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Descending into the depths is dangerous. Large quantities of CO2 can be released due to pressure changes in wells and in ventilation shafts. Concentrations of more than 5 vol.% CO2 in the air a person breathes can lead to clouding or loss of consciousness or death. Faulty gas pipe lines near a pit or shaft are also dangerous. In narrow shafts, natural ventilation is insufficient. For this reason, ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas III SP oxygen analyzer (3rd generation) is specifically designed for service in hazardous areas. The analyzer consists of transmitter and receiver unit that are mounted diametrically opposite each other on stack, ducts or reactors. The laser will cross the process gas and concentration changes are detected in-situ and in real time. LaserGas III sets a new standard for fast ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the measurements and eliminates errors related to sample ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas Q NO2 is using Tuneable Laser AbsorptionSpectroscopy(TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the measurements and eliminates errors related to sample ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas iQ2 analyzer is the first to measure up to four gases (O2, CO, CH4, H2O)* and temperature depending on configuration, which eliminates the need for multiple units for combustion analysis. The cutting-edge design and ground-breaking functionality, ensures that the instrument delivers unmatched reliability and durability. By providing an optional single flange solution, ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for group protection, area monitoring and providing a virtual fenceline, Detective+ is a rugged, interconnectable, multigas temporary area monitor. Building on Crowcon's experience in pioneering this category of detector, Detective+ has earned a reputation for reliability and versatility in demanding environments stretching from offshore platforms to the sands of the Middle East. Rugged ...
-
Manufactured by ExTox Gasmess-Systeme GmbHbased in GERMANY
Gas detection control unit for measurement of flammable and/or toxic gases as well as oxygen. Smoke detectors as option. Graphic display. Menu guided configuration. 3 Alarm levels per channel. 12 freely configurable relays. Analog outputs 4…20 mA (only ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas III ammonia analyzer (3rd generation) is specially designed for operation in hazardous areas and it provides real time in-situ NH3 measurements for virtually any type of DeNOx systems. The configuration is transmitter/receiver units for cross-duct/stack installation. An external junction (cable connection) box simplifies installation and maintenance. The principal operation ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas Q SO2 (QCL edition) is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the measurements and eliminates errors ...
-
Manufactured by NEO Monitors - a Nederman companybased in NORWAY
NEO Monitors LaserGas is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e. a non-contact optical measurement method employing solid-state laser sources. Therefore, the sensor remains unaffected by contaminants and corrosives and does not require regular maintenance. The laser beam is coupled into a measurement cell, where it is reflected one time from a flat mirror in order to enhance the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you