Tomograph (Geological Monitoring) Equipment Available In Asia & Middle East
-
Manufactured by argus electronic gmbhbased in GERMANY
The electric resistance tomographPiCUS : TreeTronic is used in conjunction with the PiCUS Sonic Tomograph for tree risk assessment in order to get detailed information about the thickness of the residual walls and type of stage of a defect such as decay. The TreeTronic tomograms show in particular the early stages of decay and ...
-
Manufactured by argus electronic gmbhbased in GERMANY
The PiCUS Sonic Tomograph is used for tree risk assessments in order to measure the thickness of the residual wall of trees with internal defects such as cavities or decay non-invasively. Most often the PiCUS sonic tomograms are recorded near ground level of trees. However, acoustic tomograms also reveal important safety information ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
y. PowerSting Transmitter Nodes make it possible to automatically inject a high power (max 3,000 V, max 12 A, max 15 kW) DC current into the ground along a survey ...
-
PremiumManufactured by Onda Corporationbased in USA
The OptiSon® Beam Analyzer quantifies beam plots, focal distances and total power from a single image. Power measurements correlate to radiation force balance and hydrophone - as does tomographic reconstruction for intensity. It can have higher spatial resolution than mechanical scanning and is invulnerable to high intensities or ...
-
Manufactured by Rocsole Incbased in USA
Here at Rocsole, we developed an intrinsically safe variant of our standard Separator Profiler that can be installed in a tank - not by flange - but cable, allowing the sensor to be moved at will. The sensor can perform accurate tomographical measurements in real time while it is moving, making it a perfect tool for profiling tanks and other ...
-
Manufactured by Rocsole Incbased in USA
Here at Rocsole, we developed an intrinsically safe variant of our standard Separator Profiler that can be installed in a tank - not by flange - but cable, allowing the sensor to be moved at will. The sensor can perform accurate tomographical measurements in real time while it is moving, making it a perfect tool for profiling tanks and other ...
-
by SeismicCitybased in USA
gathers and is input to a minimization process. The tomographic inversion and update which we are using is built to optimize the velocity field, as well as anisotropic delta and epsilon fields. A fully TTI model can be optimized for use in TTI prestack depth migration when dip and azimuth fields are ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
be able to conduct your tomographic RES/IP survey with safety in ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
to identify physical-geometrical anomalies inside structures or individual structural elements with a definitely higher resolution compared to other seismic prospecting methods; it creates an image of investigated object where all present anomalies will be reproduced. In particular, tomographic method allows to reproduce geometric ...
-
Manufactured by Dantec Dynamicsbased in DENMARK
Volumetric flow field information with 2, 3 or 4 cameras. Volumetric Velocimetry (VV) also known as 3D PIV or Tomo PIV provides truly volumetric velocity data, using up to four cameras with telecentric lenses, and a thick light sheet or a scanning thick light sheet. Time-resolved VV solutions using time-resolved CMOS cameras, as well as “classical” solutions with CCD cameras are ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
WCH4 is an innovative modular wireless instrument for cross-hole tests on foundation poles. System core are motorized reels electronically controlled on which are mounted hig-power borehole probes for cross-hole investigations on foundation poles, diaphrams, and all those infrastructural cement or concrete works that could be verified by cross-hole tests, that is through discent in tubes prepared ...
-
Manufactured by Rocsole Incbased in USA
Our instrumented ILI tool quantifies and characterizes solid deposits in piggable flow lines and pipelines. Beyond simply preventing blockages, you can use the information gathered from our Deposition In-Line Inspection to maximize production throughput, optimize your pigging program from the number of runs needed to the sizes used, detect blockages in the early phase to avoid significant costs ...
-
Manufactured by ACS-Solutions GmbHbased in GERMANY
A1040 MIRA 3D is a low-frequency ultrasonic tomography system suitable for manual and automated assessment of concrete structures. Due to its novel A-DPC® sensor technology the new MIRA provides unbeatable penetration depth, inspection sensitivity, and imaging resolution by implementing three-dimensional FMC / TFM in each instrument position. The instrument consists of a lightweight body with ...
-
Manufactured by ACS-Solutions GmbHbased in GERMANY
A1040 MIRA 3D PRO is a low frequency ultrasonic tomography system suitable for manual and automated assessment concrete structures with extended aperture for extremely deep penetration applications. Due to its novel 64 A-DPC® sensor technology, it provides unbeatable inspection range, flaw detectability and imaging resolution by implementing three-dimensional FMC / TFM in each instrument ...
-
Manufactured by Rocsole Incbased in USA
Knowing the exact profile of tanks' contents is hard - especially when there are multiple desirable – or undesirable – mediums in play. Not knowing the profile can lead to catastrophy, e.g. water or solids in oil outlet, wreaking havoc downstream. Manual sampling is always hazardous and nucleonic devices are hugely expensive to own and maintain and require specific expertise to ...
-
Manufactured by Olson Instruments, Inc.based in USA
Ultrasonic Pulse Velocity (UPV) investigations are performed to assess the condition of structural members if access to both sides is available. Sonic Pulse Velocity (SPV) is performed on mass concrete over 10 ft (3 m) thick. The Ultrasonic Pulse Velocity (UPV) systems are designed to identify and map voids, honeycomb, cracks, delaminations, and other damage in concrete, wood, masonry, stone, ...
-
Manufactured by IDS GeoRadar - part of HEXAGONbased in ITALY
Easy-to-use and robust GPR solution to improve safety before cutting or drilling into concrete structures. See thru concrete structures and reveal true data that lead to optimal decision-making. C-thrue is an all-in-one Ground Penetrating Radar (GPR) for accurate scanning and real time analysis of concrete structures. Construction and service companies as well as civil and structural engineers ...
-
Manufactured by argus electronic gmbhbased in GERMANY
The Wind-Reaction-Measurement with PiCUS TMS is used for in depth tree inspections to obtain information about a tree’s stability, defined by its root anchoring force in the ...
-
Manufactured by ImpulseRadar Sweden ABbased in SWEDEN
Raptor is a state-of-the-art high-speed 3D-GPR Array enabling the very fast collection of 3D GPR data, at speeds in excess of 130 km/hr (80 miles/hour), @ 5 cm point intervals. Raptor is capable of survey speeds that eliminate the need for traffic control and safety vehicles. Conventional systems typically operate at no more than 30 km/hr, with similar settings. Raptor is arguably the best 3D GPR ...
-
Manufactured by MoHo s.r.l.based in ITALY
Bringing the past of multichannel seismographs to a new life. SOILSPY is the MoHo’s multichannel digital system for active and passive seismic surveys. A number of unique features make it a very special seismograph. The signal is amplified and digitized where it is produced and not at the end of long cables: this ensures better recording quality and, allied to a lightweight system, forms a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you