Geological Monitoring Software For Monitoring And Testing Available In Quebec
-
by GeoTom, LLCbased in USA
GeoTom has many years of experience processing clients’ tomographic data. GeoTom’s experience and the familiarity with the software provide efficient and reliable data processing. Clients can either provide seismograph files for use in picking traveltimes (or amplitudes) which are then used in tomographic calculations of velocity (or attenuation) or provide traveltimes (or amplitudes) ...
-
by Geo2X SAbased in SWITZERLAND
Refraction seismology investigates refracted wave seismic velocities. The analysis is based on precise measurement of the propagation time between an energy source and vibration captors called geophones. Refraction seismology sections allow us to define the present lithologies as well as their geometry and velocity variations ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
BHEditor software is designed to geologically understand sections obtained with Zond software. In many cases, the binding of geophysical results is produced by the lithological columns or logs. Therefore, ability to display different types of apriori information during the geophysical interpretation of the data is very ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondIP1D is designed for 1D inversion of resistivity and induced polarization (IP) data obtained by methods of vertical electrical sounding (VES or VES-IP). ZondIP1D is based on concept of interpretation along the profile, therefore every site taken into account as part of interpretation with regards to section structure. There are options to use different inversion algorithms, as well as ...
-
based in RUSSIA
ZondProtocol represents ready solution for electrical tomography, and solves wide range of problems from protocol creating and field data processing to quality control and preparation data for inversion. The software provides support for the following instruments: SYSCAL, ABEM, COMMDD, ERA-MULTIMAX, TOMOZOND, OMEGA-48. Convenient interface and variety of data visualization features allow to solve ...
-
by Geo2X SAbased in SWITZERLAND
Electromagnetic technology allows ground conductivity measurements without setting ground sensors. The measurements are inductive and this method allows studies in most geological terrains, even for the most resistive superficial layers such as sand, gravel and asphalt. EM can map geological layer variations, contaminated soils and any surface with conductivity ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondSP2D program is designed for Self Potential (SP) method 2D data interpretation. The medium model is created through a number of cells. Each cell has the resistivity value and type of conductivity (ion or electronic) properties. Sources of SP field are installed at the borders of the cells with different type of conductivity. The size of the cells is decreasing with depth, as it is connected ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondST3D is designed for 3-D data processing and interpretation for seismic tomography by method of refracted waives. There are several options: Ground profiles (3D); Down hole; Water ...
-
Manufactured by Industrial Tomography Systems Ltd. (ITS)based in UNITED KINGDOM
.ITS’s P2+ tomography software enables customers to get the most out of their P2+ ERT instrumentation, empowering users to understand, monitor and control their processes. As well as driving the P2+ instrument, our latest Version 9 software covers all the essential features of the previous ITS tomography software, providing: Real-time tomography images, both as individual planes and ...
-
based in UNITED KINGDOM
When the GEOSUITE is deployed on the rig to the wellsite geologist, they may upload as required their key geological interpretations. Lithology, descriptions, shows, formation tops and casing picks can be transmitted at the click of a button to more regularly update the geological operations ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
The program is designed for 2D magnetic and gravity 2D modeling and interpretation in two (2) versions: land/surface; airborne. Single and easily understandable data format is used in the program, but main known data formats are ...
-
based in GERMANY
VGMETROLOGY is made for metrologists. Our universal metrology solution turns your computed tomography (CT) scanner into a comprehensive and precise metrology ...
-
based in AUSTRALIA
Maptek Vulcan software provides the mining industry with the most advanced 3D geological modelling, mine design and production planning solutions. More than 19,000 licenses of Vulcan are in use across the globe for applications ranging from exploration, through geological modelling, mine design and planning to rehabilitation. Intuitive tools help operations of all resource types and mining ...
-
based in RUSSIA
ZondST3d is desined for three-dimensional interpretation of seismic tomography data on refracted waves (land, cross-borehole and water variants). In geophysics, the term seismic tomography is known for a long time. This is due to the fact that one of the main problems in seismology - the inverse kinematics. It consists in determining the velocity structure at a known time path of the refracted ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondMT2D is designed as the main tool for 2-D magnetotelluric data inversion and covers wide frequency band of the data - MT, AMT and RMT. This feature gives the possibility to study resistivity distribution from first meters to dozens of kilometers or even several hundred of kilometers. ZondMT2D provides modelling, sensitivity analysis as well as inversion of the field ...
-
by Geo2X SAbased in SWITZERLAND
Gravity exploration methods study the spatial variation of the gravity field. The variations can depend on the heterogeneous distribution of underlying geological units. A sharp analysis on these variations allows the reconstruction of an underground density ...
-
based in RUSSIA
ZondHED1D program is designed for one-dimensional data interpretation of AC vertical electric sounding (frequency mode). A method of the vertical electrosounding (VES) is one of the oldest methods of electric prospecting. The first applications of method were in 20th years of XX century. Comparative simplicity and evidence of VES resulted in its wide distribution and development in the whole ...
-
Manufactured by PASI s.r.l.based in ITALY
Data Inversion Software For Electrical Imaging And Induced Polarization (Ip) Res3dinv. Arization (Ip) Res3dinv. This software has been developped for the inversion of data collected as to an electrode grid with rectangular meshes (Loke & Barker, 1996). The spreadings being supported include Pole-Pole, Pole-Dipole, line Dipole-Dipole, equatorial Dipole-Dipole and Wenner-Schlumberger. RES3DINV ...
-
by GeoTomo, LLCbased in USA
TomoPlus is a comprehensive near-surface solutions package. It is designed to obtain an accurate near-surface velocity model , and derive accurate long and short wavelength statics solution to help seismic data ...
-
based in CANADA
The GSFLOW Management Module for VIEWLOG provides a complete set of pre– and post-processing functions for the U.S.G.S. GSFLOW and integrated groundwater flow model. The GSFLOW module is fully integrated with VIEWLOG and it builds on the Well Database, geologic modeling, mapping, cross section and 3D tools within VIEWLOG, adding Time Series analysis of observations and outputs and full ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you