Geotechnical Monitoring Equipment For Monitoring And Testing Available In Zimbabwe
-
ShowcaseManufactured by Brentwood Industries, Inc.based in USA
A time-tested technology, trickling filters offer a simple, cost-effective, energy-efficient treatment solution. With more than 500 trickling filter installations worldwide, Brentwood’s media and components have been optimized to guarantee the best performance for any application. By maximizing surface area in a given volume, Brentwood’s structured-sheet media provides an ideal ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-604DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-604DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flowrate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-604DT Series design ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoSpread – Chemical and Food Grade 250 Series is a group of epoxy coatings that provides a corrosion-resistant flooring system. The 250 is a pour and spread material for quick and easy application. Where greater skid-resistance is required, use the No. 251 Broadcast system in conjunction with the 250. The trowelable formulation is the Vertical 252 which is suitable for cove ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Displacement measurements along measuring lines (boreholes) provide information about the deformation behaviour of hard rock or unconsolidated rock in the area of the monitored terrain or structure, as well as about the interaction between the structure and the ground. With the Sliding Deformeter, displacement and deformation profiles in soil, rock and structures are precisely recorded metre by ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by AMS, Inc.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This model complies with ASTM D6951 specifications and comes with a chart to compute CBR values, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The SmallRotoSonic ML DUO (SRS ML DUO) has, in combination with the SmallRotoSonic drill head, a four speed rotation head. It is easy to switch between the sonic drill head and rotary head by shifting the trolleyboard to the left or the right to combine Sonic sampling and diamond core drilling in the same borehole. The SRS ML DUO delivers True 150 HZ Frequency which makes it really powerful. This ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 12-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by Vista Clara, Incbased in USA
Dart packs the power of magnetic resonance logging into a highly portable, battery-powered system operable by a single user. With Dart, any small-diameter bore—no matter how remote—becomes an opportunity for a high-resolution hydrogeologic log. Dart’s single-person deployment and operation enables measurement in remote or environmentally sensitive locations while eliminating the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
ConoCrete – Chemical & Food Grade 115 is a chemically-resistant, 100% solids, aggregate-filled, epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of these materials far exceed those of concrete, providing a surface that not only has greater durability, but a chemical-resistant barrier to the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804DTE-30 high volume enzyme dust air sampling systems are designed for remote unattended continuous air sampling applications. The DF-804DTE-30 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen RestoKrete® Underlayment F-120 is a fast-setting, high early strength, Portland/calcium-aluminate based resurfacing material available in three formulations - Trowelable, Castable or Gunite. Selection of material is dependent upon concrete condition and whether application is on vertical, horizontal or overhead ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-804DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-804DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The GAS-804DTE Series design ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804E-30 series high volume enzyme dust air sampling systems are designed for remote unattended continuous air sampling applications. The DF-804E-30 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 6-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The inclinometer casing tubes are designed to accommodate all commercially available inclinometers. They provide access and precise orientation for both wheel-mounted and fixed inclinometers. They are primarily used to monitor the stability of embankments, dikes slopes, rock cuts, foundations, excavation walls, piles, coffer dams, slope areas, ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Soil sampling is simple and inexpensive tool for both geotechnical and environmental soil investigation. It easily returns your investment many times over. The window type soil samplers are driven into the soil by means of the penetrometer pushing rig. The samplers come standard with M22 threaded connections and can be connected to the CPT sounding tubes by means of an cross-over tube. Since the ...
-
PremiumManufactured by AMS, Inc.based in USA
Pask Permeameter Kit; The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 200 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you