Geotechnical Monitoring Equipment For Monitoring And Testing In Netherlands
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
A magnetometer is a scientific instrument used to measure the strength and/or direction of the magnetic field. The Earth’s magnetic field (the so magnetosphere) varies from place to place, for various reasons such as inhomogeneity of rocks and the interaction between charged particles from the Sun and the magnetosphere. A mass of ferromagnetic material creates a detectable disturbance in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL140 DUO (CRS XL140 DUO) is a powerful drilling machine, equipped with CompactRotoSonic drill head as well as a four speed rotation head. The different drilling heads ensure that the machine does the job it is supposed to do in all kinds of conditions. To change drill heads easily, use the trolley board. This is to combine sonic sampling with diamond core drilling in the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The digital CPT-logger is the heart of the data acquisition system for geotechnical and environmental testing procedures, such as cone penetration testing (CPT). It is to be used in combination with a standard laptop or industrial computer and data acquisition software, such as a CPT-Explorer. You can order this innovative product at Gouda ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The inclinometer casing tubes are designed to accommodate all commercially available inclinometers. They provide access and precise orientation for both wheel-mounted and fixed inclinometers. They are primarily used to monitor the stability of embankments, dikes slopes, rock cuts, foundations, excavation walls, piles, coffer dams, slope areas, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The shear strength or stress of the soil depends on different soil characteristics such as for instance: the granular composition, the humus content, the humidity and (in case of vegetation covered areas) the degree of coverage and the density of the roots. In order to determine the shear stress in the strata in for instance a profile pit, on the surface (for instance a sports terrain), at the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic Crawler is a drilling machine that can operate under different working conditions. Its stability and rigidity optimise the power of the CompactRotoSonic drill head. This drilling rig excels in smaller spaces because it is so manoeuvrable. This drilling rig features the drill head which allows simultaneous rotation and vibration. A separate swivel allows for liquid, foam or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Penetrograph, standard set for measurements to a depth of 80 ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 6-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL170 MAX (CRS XL170 MAX) is not only powerful but also multi-purpose. The easy-to-use drill is simple to handle, making it perfect for use in smaller spaces. This sonic drill is supplied with a drill rod manipulator. Our CRS XL170 MAX is extremely strong thanks to the true 150 Hz frequency that the machine provides. The drilling rig can be used in many ways. It can be used ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van der Horst core sampler. Set for sampling to a depth of 7 ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 10-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Soil sampling is simple and inexpensive tool for both geotechnical and environmental soil investigation. It easily returns your investment many times over. The window type soil samplers are driven into the soil by means of the penetrometer pushing rig. The samplers come standard with M22 threaded connections and can be connected to the CPT sounding tubes by means of an cross-over tube. Since the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Our water level meters are accurate and reliable meters designed for fast, easy and reliable measurements of water levels (and optionally the temperature as well) in wells, piezometer standpipes, bore holes, observation tubes, tanks and in open water. Its sturdy design makes it a reliable tool suitable for intensive use and is easy to repair in case it might break ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Electrical CPT cones and piezocones are high-precision measuring instruments purposely developed for geotechnical soil investigation. You can find these products at Gouda Geo-Equipment. We take great pride in being one of the market-leading brands when it comes to CPT products. Count on our innovative products to help you gather the most accurate soil characteristics ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Measure excess pore pressure that is generated during soil penetration with our digital CPTU piezocone testing system. In the quotations, Gouda Geo-Equipment issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a truck-based, crawler-based, trailer-based or stand-alone unit) and on the other hand the CPT system (this could either be mechanical ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL170 MAX DUO (CRS XL170 MAX DUO) is larger than the CRS XL140 DUO variant. As such this machine offers more space for various options that are available. The rig is equipped with CompactRotoSonic drill head as well as a four speed rotation head. Thanks to the different drill heads, the machine can easily work under different conditions. The drilling heads are easy to change ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core cutter method, according to Dutch RAW-standard 2010, test no. ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
Lightweight 12-inch HDPE discharge pipe with lever lock couplings for water transport and temporary pumping installations. The couplings are additionally secured with hose clamps ensuring the discharge pipes can be used for a higher pipe pressure. BBA Pumps pipes are 5.8 metres long as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you