Geotechnical Monitoring Services For Monitoring And Testing Available In Palau
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Apart from designing and manufacturing equipment, Gouda-Geo also is your partner for repair and general or routine maintenance (i.e. servicing) and even restoring machinery and equipment back to working order. This to ensure they work efficiently and to prevent breakdown and unnecessary repairs. We will keep your equipment running smoothly in any ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Koden gauge is an system based on ultrasonic distance measurement and is used to measure the shape and deviation of pile and diaphragm wall bores. Therefore, an echo sonar is lowered vertically along the axis of the borehole and the distance to the borehole wall is continuously determined and precisely recorded in one or two directions. In addition, borehole wall breakouts can be identified ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Different equipment is available to perform inclinometer measurements along vertical and horizontal measurement lines. The values measured by the very precise measuring probes are automatically recorded and in-situ already checked and verified. In the office, the data are evaluated and graphically and numerically presented. A photo documentation is additionally added to the ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Static pile load tests, in vertical and horizontal directions, are used to test foundation piles for their load-bearing capacity and serviceability. The skin friction along the vertically loaded pile or the bedding along the horizontally loaded pile can be determined via the occurring ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Koden gauge is an system based on ultrasonic distance measurement and is used to measure the shape and deviation of pile and diaphragm wall bores. Therefore, an echo sonar is lowered vertically along the axis of the borehole and the distance to the borehole wall is continuously determined and precisely recorded in one or two directions. In addition, borehole wall breakouts can be identified ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Regular maintenance in our workshops by our specialist staff is the reason for the proverbial longevity of our geotechnical measuring instruments, in addition to the robust design and continuous product care. Sustainability is important to ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Plate load tests are used to determine the rock deformability for construction work in bedrocks. Large load plates are used which cover several fracture systems for representative test results in fractured rock. If possible, the opposite tunnel side is used as abutment of the test plate. In this way, double plate load tests can additionally be ...
-
based in USA
TRI/Environmental is a full service ARML & GAI-LAP accredited geotechnical and geosynthetic testing laboratory and validated by the US Army Corps of Engineers. TRI has one civil and three geotechnical engineers on staff who review, coordinate, and assist with our clients’ geotechnical testing programs. Our geotechnical testing projects range from tailings dams, windmill foundations, ...
-
based in UNITED KINGDOM
Obtaining quality due diligence services during the acquisition, sale or financing of a wind project is essential to ensure that there are no issues that could hinder the profitability or viability of a ...
-
based in FRANCE
Review and interpretation of Geophysical & Geotechnical data. Structural design : jacket / monopile / J-tubes / boat-landings. Substations design. Naval Architecture (Mooring and floater ...
-
based in AUSTRALIA
Douglas Partners can provide geotechnical analysis and design services for a range of building and infrastructure projects including: Industrial, commercial and residential buildings, both low and high rise; Deep basements; Roads and railways including pavements, bridges, tunnels, embankments and cuttings; Mines and dams together with associated ...
-
by Fugrobased in NETHERLANDS
For nearshore projects, our marine plant and equipment enables Fugro to offer a range of drilling, testing and installation work in a safe and efficient manner. Capable of operating from high water level to water depths of around 40 metres, our jack-up platforms can be mobilised to almost any coastal ...
-
based in UNITED KINGDOM
RPS can determine and overcome the engineering implications of remediation design on development projects. Our chartered geotechnical engineers and engineering geologists are experienced in most aspects of both onshore and offshore geotechnical engineering. We offer geotechnical engineering support at any stage of a project from the design of land or marine site investigations to detailed ...
-
based in SLOVAKIA
ENVIGEO provides a wide range of services in engineering geology and ...
-
based in USA
Over the last three decades, HRP's environmental engineering expertise has helped hundreds of clients assess, remediate and redevelop contaminated real estate. The successful transition of a Brownfield property to a renovated enterprise requires the creative coordination of many of HRP’s core ...
-
based in AUSTRALIA
Maptek provides a full range of services to help Vulcan users optimise the operation of their mine throughout the entire mining life ...
-
based in USA
The Problem: Even a strongly-built structure with an excellent design will not stand on a bad foundation. Although the structure will carry its loads, the earth beneath it may not. The displacements due to inadequate foundations may alter the stress distribution significantly within a structure, leading to cracks and, eventually, failure. The Leaning Tower of Pisa is a famous example of a bad ...
-
Manufactured by Oceanit Laboratories, Inc.based in USA
Oceanit designed permanent physical best management practices (BMPs) to reduce the pollutant load to Salt Lake. Stormwater laden with sediment and trash flows to Salt Lake, a 42-acre lake near the Honolulu Airport, degrading the water quality of the lake. Oceanit was selected by the COE to design permanent physical best management practices (BMPs) to reduce the pollutant load to the lake. The ...
-
by Simam Spabased in ITALY
The natural environment is the single most important factor responsible for the existence of life on earth. Controlled by the planet’s natural cycles, its laws are often in contrast with the non-natural anthropic activities undertaken by man. To preserve life at best in our ever increasing industrialized planet, it is and will be crucial in the near futureto maintain a good balance between ...
-
Manufactured by Plassonbased in ISRAEL
Plasson's Wastewater System: For use with PE pipe in leak free Wastewater Systems, Gravity Sewers, Vacuum Sewers. The Plasson Wastewater System is completely watertight and Plasson welding systems with automatic welding controls and data recording are available if required. PLASSON WASTEWATER FITTINGS provide an excellent system for tapping into PE wastewater lines without the need for cut-ins - ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you