Geotechnical Testing Equipment For Monitoring And Testing In Ohio
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMS, Inc.based in USA
Take direct readings of shear strength to depths up to 10 ft (3 meters) in soft to stiff clays. Three (3) vane sizes allow for the direct determination of un-drained shear strength of soft to stiff clays. The peak vane value is determined by a calibrated scale ring built into the head assembly. The cross handle is used both to push the vane to the desired test depth and apply the shearing torque. ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
PremiumManufactured by AMS, Inc.based in USA
Improve effectiveness of geotechnical testing and sampling with a pre-bored hole. Includes: 5/8' threaded, 2 1/4' regular auger and 2 1/4' 5/8' planer auger, one 4' 5/8' extension, one 3' 5/8' extension, rubber-coated cross handle, black poly-canvas ...
-
PremiumManufactured by AMS, Inc.based in USA
Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel plungers, carrying case, data tables, register plates and ...
-
Manufactured by AFS Technologybased in USA
Our trailer tippers allow for automatic unloading of numerous bulk materials including Whole Tires, TDF, Wood Chips, Wood Fuel, Mulch, Compost, RDF, Grains and Crop Residues, other Biomass and bulk materials. The trailer tipper is often situated to dump the materials directly into a Live Bottom Hopper. ...
-
Manufactured by DEWESoftbased in SLOVENIA
Easy to use and flexible Pass-by noise test system with hi-end DAQ hardware and powerful software capabilities for online visualization, validation, and analysis. ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Mass DCP Hard Cone ...
-
PremiumManufactured by AMS, Inc.based in USA
Pask Permeameter Kit; The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Mass DCP Drive ...
-
PremiumManufactured by AMS, Inc.based in USA
The Eijkelkamp soil moisture sensor can be connected to make a one point measurement and record the soil moisture percentage at the measureing point (applying the Frequency Domain technique). The sensor has a measuring range of 5-55 percent and an accuracy of 5 percent. The soil moisture data are stored together with the coordinates and the measured resistance to penetration. The sturdy, ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
PremiumManufactured by AMS, Inc.based in USA
Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...
-
PremiumManufactured by AMS, Inc.based in USA
The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
-
PremiumManufactured by AMS, Inc.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This model complies with ASTM D6951 specifications and comes with a chart to compute CBR values, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you