Geotechnical Testing Equipment For Monitoring And Testing
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The digital CPT-logger is the heart of the data acquisition system for geotechnical and environmental testing procedures, such as cone penetration testing (CPT). It is to be used in combination with a standard laptop or industrial computer and data acquisition software, such as a CPT-Explorer. You can order this innovative product at Gouda ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct Push Drilling Technology allows for a wide variety of direct push tooling and instrumentation to be advanced into a subsurface lithology using the static weight of the rig, hydraulic down pressure, and rapid hydraulic hammering. Direct Push Tooling is used to perform soil, soil gas, and groundwater sampling. It is also used for soil remediation, and geotechnical sampling and testing. Many ...
-
PremiumManufactured by AMS, Inc.based in USA
Pask Permeameter Kit; The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The CompactRotoSonic XL140 DUO (CRS XL140 DUO) is a powerful drilling machine, equipped with CompactRotoSonic drill head as well as a four speed rotation head. The different drilling heads ensure that the machine does the job it is supposed to do in all kinds of conditions. To change drill heads easily, use the trolley board. This is to combine sonic sampling with diamond core drilling in the ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model 2031H and the stable data acquisition time base forgoes the ...
-
PremiumManufactured by AMS, Inc.based in USA
Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel plungers, carrying case, data tables, register plates and ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
PremiumManufactured by Mobile Power Equipment, LLC (MPE)based in USA
Sewer Camera with Free Locator, Self-Leveling Sewer Camera 512Hz Sonde Meter Counter, Built-in Microphone & Speaker, 1080P 10" IPS Monitor, IP68 Waterproof Pipe Inspection Camera with ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The SmallRotoSonic ML DUO (SRS ML DUO) has, in combination with the SmallRotoSonic drill head, a four speed rotation head. It is easy to switch between the sonic drill head and rotary head by shifting the trolleyboard to the left or the right to combine Sonic sampling and diamond core drilling in the same borehole. The SRS ML DUO delivers True 150 HZ Frequency which makes it really powerful. This ...
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for RCRA, CERCLA, UST, and Brownfield site assessments and ...
-
PremiumManufactured by AMS, Inc.based in USA
The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Mass DCP Hard Cone ...
-
PremiumManufactured by AMS, Inc.based in USA
Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...
-
PremiumManufactured by Challenge Technologybased in USA
Automated Loaded Wheel Tracker model LWT Test for rutting and stripping qualities of asphalt ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you