Heat Flow Monitoring Equipment For Monitoring And Testing Near Australia
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS225 is a prime example of our commitment to provide the highest-quality monitoring products in the world. Our revamped design, rigorous validation process, and stringent quality standards are all focused on providing the fantastic quality you require to reliably generate data you can trust, even in the harshest of environments. Learn more about the CS225's quality testing and validation ...
-
Manufactured by TA Instruments -Waters Corporationbased in USA
A Instruments invites you to experience the world’s finest Simultaneous DSC/TGA, the Discovery SDT 650. Discover the advanced engineering and attention to detail that provides enhancements in every aspect of performance and a new level of user experience. Available with or without an Autosampler, the Discovery SDT is sure to meet your needs and exceed your ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Sensor enabling primary element corrosion inspection. Only available for North America. Prowirl C 200 is a product line of carbon steel vortex meters dedicated to the Canadian and American market. The carbon steel sensor offers higher resistance to inter-granular stress corrosion cracking, especially in steam systems for SAGD applications. Prowirl C 200 is only available with cCSAus hazardous ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Versatile flowmeter with detection of wet steam conditions and best-in-class accuracy. Prowirl F is the multivariable flowmeter with inline wet steam measurement. While dedicated to steam applications, it offers excellent measuring accuracy for gases and liquids in ancillary processes. With genuine loop-powered technology, Prowirl F 200 enables cost-effective and seamless integration into ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flowmeter with best-in-class accuracy despite pipe reduction. Prowirl R proves to be the dependable solution for energy management with steam, gas and liquids in ancillary processes. Moreover, its design is optimized for low flows. With genuine loop-powered technology, Prowirl R 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest operational safety ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flowmeter optimized for requirements of high-pressure mating pipes. Prowirl O is ideally suited for reliable process control in demanding gas and steam applications with high process pressure. Moreover, its design ensures maximum safety in main and ancillary processes. With genuine loop-powered technology, Prowirl O 200 enables cost-effective and seamless integration into existing ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost-effective wafer flowmeter, available as compact or remote version. The Prowirl D sensor can be installed directly between flanges and thus serves as the functional device for applications in ancillary processes at little installation cost. With genuine loop-powered technology, Prowirl D 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
Measurement Technique: Installed across the majority of the UK’s municipal waste incinerators, the MIR-FT Utilises Fourier Transform Infra-Red (FT-IR) to offer multiple gas measurements simultaneously, including NO, NO2, SO2, NH3, HCl and CO. With the emissions limits tightening and new gases being introduced, this instrument allows future gas upgrades, providing the solution for today and ...
-
Manufactured by Dwyer Instruments Incbased in USA
The new Series 641 Air Velocity Transmitter is the ideal instrument for monitoring air flow. This transmitter uses a heated mass flow sensor which allows for precise velocity measurements at various flow rates and temperatures. The 641’s 16 field selectable ranges provides it the versatility to be selected for several air flow applications. The optional LED produces a complete, low-cost ...
-
Manufactured by First General Technology Co., Ltd. (FGT)based in TAIWAN
3810DS II is a mass flow meter with a built-in display using a time-tested flow sensor. The 3810DS II displays total flow in addition to instantaneous flow, which is an improvement on the previous model 3810DS. Just like the 3810DS, the 3810DS II is also available with flow sensor and precision needle valve built into one ...
-
Manufactured by First General Technology Co., Ltd. (FGT)based in TAIWAN
3810DS II is a mass flow meter with a built-in display using a time-tested flow sensor. The 3810DS II displays total flow in addition to instantaneous flow, which is an improvement on the previous model 3810DS. Just like the 3810DS, the 3810DS II is also available with flow sensor and precision needle valve built into one ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-25 is a portable heat flow meter for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Best for small samples of insulation and construction materials. The Heat Flow Meter (HFM) 25 for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Offering the ...
-
Manufactured by Thermtest Inc.based in CANADA
GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials. Best for Metals, Polymers, Composites, and Pastes. The Guarded Heat Flow Meter (GHFM-01) follows ASTM E1530-19 for testing thermal resistance and thermal conductivity of solids, such as metals, polymers, composites and paste from -20 °C to 310 ...
-
Manufactured by Thermtest Inc.based in CANADA
The Heat Flow Meter (HFM) 25 for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Offering the testing power of a full-size heat flow meter, optimized for small insulation samples and budget. The economic HFM-25 was designed to meet the growing need for steady-state testing of small samples of insulation for true thermal ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-100/HFM-50 Heat Flow Meter is an easy-to-use rapid technique for thermal conductivity and thermal resistance measurement. Best for insulation products, construction materials, packaging, and ...
-
Manufactured by Thermtest Inc.based in CANADA
The Guarded Heat Flow Meter (GHFM-02) follows ASTM E1530-19 for testing the thermal resistance and thermal conductivity of solids, such as metals, polymers, and composites. The easy to operate GHFM-02 follows the trusted steady-state approach, with the addition of a guard to limit the effects of lateral heat loss. This design, allows testing of a wide range of materials with low to medium thermal ...
-
Manufactured by Thermtest Inc.based in CANADA
The GHFM-01 Guarded Heat Flow Meter is designed to test the thermal resistance and thermal conductivity of both homogeneous and heterogeneous materials. Best For Metals, Polymers, Composites, and Pastes. The Guarded Heat Flow Meter (GHFM-01) follows ASTM E1530-19 for testing thermal resistance and thermal conductivity of solids, such as metals, polymers, composites and paste from -20 °C to 310 ...
-
Manufactured by Thermtest Inc.based in CANADA
The Thermtest Heat Flow Meter Apparatus is a measuring instrument for determining steady-state heat transfer properties, thermal conductivity, and thermal resistance of flat slab specimens in accordance with EN 12667, ISO 8301, and ASTM C518 standards. It is designed for use in industrial test laboratories for quality control of thermal insulation materials of low and intermediate thermal ...
-
Manufactured by Autotronic Enterprise Co., Ltd (Aecl Group)based in TAIWAN
The Ultrasonic Flowmeter and Heat meter is a well-designed device providing multiple functions of flow and heat measurement with five user-settable signal outputs such as 4-20mA, OCT, relay, digital RS485 Modbus RTU and Modbus ASCII interfaces. The device is equipped with reliable clamp-on transducers and is able to install on pipe from DN15 to DN3000 without damaging the pipeline. The Backlit ...
-
Manufactured by Sorel GmbH Mikroelektronikbased in GERMANY
The controller for small fresh water stations with speed-controlled high-efficiency ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you