Heat Flux Monitoring Equipment For Monitoring And Testing Available In Colombia
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Portable, Two-Piece Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron Calibration Source M315-HT series are infrared radiators used for calibrating and verifying the output signals of pyrometers, thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Temperature range: Ambient +5 to ...
-
Manufactured by Zeeco, Inc.based in USA
The picture (right) shows Zeeco’s GLSF Free-Jet round flame burners in operation. The design uses the Free-Jet method of mixing the fuel gas ejected from the gas tips with the surrounding inert products of combustion which dramatically lowers thermal NOx production. In addition to great NOx reduction performance, the design offers a great turndown of typically 10:1 or greater and each tip ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-100/HFM-50 Heat Flow Meter is an easy-to-use rapid technique for thermal conductivity and thermal resistance measurement. Best for insulation products, construction materials, packaging, and ...
-
based in USA
The BBS1700 precision blackbody radiation source is used for calibration verification and calibration of non-contact infrared thermometers / pyrometers, thermal imaging detectors / cameras, focal plane array detectors, and heat flux meters. This versatile blackbody source is also ideal for use with collimators and for automated calibration test stations. This blackbody calibration source ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-25 is a portable heat flow meter for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Best for small samples of insulation and construction materials. The Heat Flow Meter (HFM) 25 for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Offering the ...
-
Manufactured by Fire Testing Technologybased in UNITED KINGDOM
ISO 5660; ASTM E1354; ASTM E1474; ASTM E1740; ASTM F1550; ASTM D6113; CAN ULC 135; BS 476 Part 15. Cone Calorimetery (ISO 5660; ASTM E1354) is the most significant bench scale instrumentation in the field of fire ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
Balcke-Dürr has experience over many years for different type of process cooling equipment for different chemical application to produce ammonia, methanol, hydrogen plants, ethylene oxide etc. We are able to deliver complex designs with required high quality to ensure reliable ...
-
Manufactured by Qinsun Instruments Co., LTDbased in CHINA
Cone calorimeter is able to determine parameters such as Ignition Time, Heat Release rate, Mass Loss, and other properties relevant to fire characteristics. It complies with ISO 5660; ASTM E1354; BS 476 Part 15, etc. It is the most widely used instrument in Building material, Rail, Cable and wire, ...
-
Manufactured by OTT HydroMet Solar Energybased in USA
Easy to use and with real-time data directly from the display. The LAS MkII measures atmospheric turbulence and can derive sensible heat fluxes over distances from 100 m to 4.5 km. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TCAV-L typically provides the average temperature of the top 6 to 8 cm of soil for energy-balance in flux systems. It parallels four thermocouples together into one 24 AWG wire. Each member of a thermocouple pair can then be buried at a different depth. The two pairs are separated at a distance of up to 1 ...
-
Manufactured by Deatakbased in USA
The IRP-3 is designed to measure the flame propagation of aircraft insulation ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The HFP01, manufactured by Hukseflux, measures soil heat flux, typically for energy-balance or Bowen-ratio flux systems. It outputs a voltage signal that is proportional to the heat flux of the surrounding medium. At least two sensors are required for each site to provide spatial averaging. Sites with heterogeneous media may require additional ...
-
Manufactured by FluxTeq LLCbased in USA
The HF WifiDAQ is an 8 channel heat flux sensor and thermocouple DAQ that can take data directly into a Google Sheet spreadsheet. This unit has ultra-high resolution. It is 24 bit and can resolve down to the microvolt scale for extremely low heat fluxes. Each device purchase comes with a particular Google Sheet ID, Software to program the logger comes with the device and is available on ...
-
Manufactured by Radiometer Physics GmbH (RPG)based in GERMANY
The microwave scintillometer RPG-MWSC-160 provides latent and sensible heat flux observations within the atmospheric surface layer, when it is conbined with an optical Large Aperture Scintillometer (LAS). In 2014 Radiometer Physics GmbH (RPG) released the first commercially available microwave scintillometer RPG-MWSC-160. It was designed for combined operation with an optical Large Aperture ...
-
Manufactured by Concept Equipment Limitedbased in UNITED KINGDOM
The EN ISO 9239-1 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent ...
-
Manufactured by FluxTeq LLCbased in USA
The PHFS-01e is a heat flux sensor that is encapsulated in either copper, brass, or aluminum in order to make it more robust. The metal encapsulation may add a relatively small amount of thickness and thermal resistance to the total sensor package, but it also allows the PHFS-01e an increased sensitivity and durability. Increased durability is advantageous when the sensor is required to withstand ...
-
Manufactured by Scintec AGbased in GERMANY
The Scintec BLS900 Neo measures atmospheric turbulence, heat flux and crosswind over path lengths between 100 m (with Path Reduction Aperture, otherwise 500 m) and 6000 m. As part of a meteorological station it can also be used to determine the evapotranspiration over extended ...
-
Manufactured by Duraflow LLCbased in USA
DF-340 is a unique non-hazardous reagent developed to replace hazardous sodium hydroxide (caustic soda) solutions for neutralization of acidic wastewaters in many industrial pH adjustment ...
-
Manufactured by FluxTeq LLCbased in USA
The PHFS-01 heat flux sensor is the first low-cost, yet reliable sensor on the market. It has minimal thickness while still maintaining excellent sensitivity. This sensor is recommended for permanent placement use such as long term thermal monitoring of windows, walls, ducts, pipes, etc. This sensor is NIST ...
-
Manufactured by FluxTeq LLCbased in USA
The HTHFS-01 is the first heat flux sensor on the market that is capable of withstanding temperatures up to 1000 C (1800 F). The HTHFS's thermopile is constructed entirely of robust materials and placed within a high temperature inconel housing. Inconel sheathing also protects the sensor's measurement leads against extreme temperatures that is experienced in harsh testing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you