Heat Flux Monitoring Equipment For Monitoring And Testing Available In Louisiana
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Portable, Two-Piece Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron Calibration Source M315-HT series are infrared radiators used for calibrating and verifying the output signals of pyrometers, thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. Temperature range: Ambient +5 to ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-100/HFM-50 Heat Flow Meter is an easy-to-use rapid technique for thermal conductivity and thermal resistance measurement. Best for insulation products, construction materials, packaging, and ...
-
Manufactured by Zeeco, Inc.based in USA
The picture (right) shows Zeeco’s GLSF Free-Jet round flame burners in operation. The design uses the Free-Jet method of mixing the fuel gas ejected from the gas tips with the surrounding inert products of combustion which dramatically lowers thermal NOx production. In addition to great NOx reduction performance, the design offers a great turndown of typically 10:1 or greater and each tip ...
-
Manufactured by HuksefluxUSA, Inc.based in USA
Next-level sensors from the world market leader in heat flux measurement, FHF05SC series is a combination of our standard models FHF05 heat flux sensor and a heater. The heater allows you to perform self-tests, verifying sensor functionality and stability during use, without having to remove the sensor. FHF05SC series is ideal for high-accuracy and long-term heat flux measurement, construction ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TCAV-L typically provides the average temperature of the top 6 to 8 cm of soil for energy-balance in flux systems. It parallels four thermocouples together into one 24 AWG wire. Each member of a thermocouple pair can then be buried at a different depth. The two pairs are separated at a distance of up to 1 ...
-
based in USA
The BBS1700 precision blackbody radiation source is used for calibration verification and calibration of non-contact infrared thermometers / pyrometers, thermal imaging detectors / cameras, focal plane array detectors, and heat flux meters. This versatile blackbody source is also ideal for use with collimators and for automated calibration test stations. This blackbody calibration source ...
-
Manufactured by Fire Testing Technologybased in UNITED KINGDOM
ISO 5660; ASTM E1354; ASTM E1474; ASTM E1740; ASTM F1550; ASTM D6113; CAN ULC 135; BS 476 Part 15. Cone Calorimetery (ISO 5660; ASTM E1354) is the most significant bench scale instrumentation in the field of fire ...
-
Manufactured by OTT HydroMet Solar Energybased in USA
Easy to use and with real-time data directly from the display. The LAS MkII measures atmospheric turbulence and can derive sensible heat fluxes over distances from 100 m to 4.5 km. ...
-
Manufactured by HuksefluxUSA, Inc.based in USA
TCOMSYS01 is a measuring system to help understand and quantify “causes and effects” leading to human thermal comfort. The TCOM01 body is temperature stabilized at 33 °C so that it offers a relatively direct measurement of the human experience. In essence, TCOM01 is a miniature thermal mannequin, measuring according to the innovative Hot Cube method. The heater power required to ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
Balcke-Dürr has experience over many years for different type of process cooling equipment for different chemical application to produce ammonia, methanol, hydrogen plants, ethylene oxide etc. We are able to deliver complex designs with required high quality to ensure reliable ...
-
Manufactured by Thermtest Inc.based in CANADA
The HFM-25 is a portable heat flow meter for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Best for small samples of insulation and construction materials. The Heat Flow Meter (HFM) 25 for the measurement of thermal resistance and thermal conductivity of small samples of insulation and construction materials. Offering the ...
-
Manufactured by Qinsun Instruments Co., LTDbased in CHINA
Cone calorimeter is able to determine parameters such as Ignition Time, Heat Release rate, Mass Loss, and other properties relevant to fire characteristics. It complies with ISO 5660; ASTM E1354; BS 476 Part 15, etc. It is the most widely used instrument in Building material, Rail, Cable and wire, ...
-
Manufactured by Scintec AGbased in GERMANY
The Scintec BLS450 Neo measures atmospheric turbulence and heat flux over path lengths between 100 m (with Path Reduction Aperture, otherwise 500 m) and 6000 m. As part of a meteorological station it can also be used to determine the evapotranspiration over extended ...
-
Manufactured by HuksefluxUSA, Inc.based in USA
STP01 accurately measures the temperature profile of the soil at 5 depths close to its surface. It is used for scientific grade surface energy balance measurements. The sensor is buried and usually cannot be taken to the laboratory for calibration. The on-line self-test using the incorporated heating wire offers a solution to verify STP01’s measurement ...
-
Manufactured by Microfilter Co., Ltd.based in SOUTH KOREA
The 8 stage by-pass adjustable VH-IEN SERIES provides a filter solution for coffee professionals with a system that fulfills every preference regarding hardness and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The HFP01SC, manufactured by Hukseflux, measures soil heat flux—typically for energy-balance or Bowen-ratio flux systems. It is intended for applications requiring the highest possible degree of measurement accuracy. The HFP01SC outputs a voltage signal that is proportional to the heat flux of the surrounding medium. At least two sensors are required for each site to provide spatial ...
-
Manufactured by Fire Testing Technologybased in UNITED KINGDOM
FAR 25.853 (a-1), FAA Fire Test Handbook – Chapter 5; ASTM E906 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products. The Rate of Heat Release Apparatus is used to expose aircraft interior cabin materials to an incident radiant heat flux of 35 kW/m², to comply with FAR 25.853 [a-1] requirements. ...
-
Manufactured by HuksefluxUSA, Inc.based in USA
LI19 is a high accuracy handheld read-out unit / datalogger. It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors. LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life and memory allow continuous ...
-
Manufactured by Beta Control Systems, Inc.based in USA
The system removes iron contaminants carried into the flux tank from the rinse tanks at a processing rate of 6,500 – 10,000 gallons per day. The processing rate is dependent upon the solids load in the flux tank. If there are high levels of contamination in the incoming flux, solutions processed by this system should return the filtered flux solution with approximately half of the ...
-
Manufactured by Eltek Limitedbased in UNITED KINGDOM
General purpose bipolar range transmitters that are designed to be used with the HukseFlux HFP01 heat flux plate. The GS42H has two inputs and the GS44H has four inputs; all inputs have the same range. This range is hardware configured at the time of manufacture. The transmitter will have a suffix letter corresponding to the range - see the specification section for more ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you