heat flux monitoring (Heat Flux Monitoring

Eltek - Model GS42H & GS44H (A/B/C/D/E) - Transmitters for Heat Flux Monitoring

General purpose bipolar range transmitters that are designed to be used with the HukseFlux HFP01 heat flux plate. The GS42H has two inputs and the GS44H has four inputs; all inputs have the same range. This range is hardware configured at the time of manufacture. The transmitter will have a suffix letter ...

By Eltek Limited based in Haslingfield, UNITED KINGDOM. from Heat Flux - GenII Transmitters for Heat Flux Measurement Product line

Premium

Advanced Energy - Model Mikron M315-HT - Portable, Two-Piece Low Temperature Blackbody Calibration Source

Portable, Two-Piece Low Temperature Blackbody Calibration Source with a Large Surface Area, Ambient +5 to 450°C. Advanced Energy's Mikron Calibration Source M315-HT series are infrared radiators used for calibrating and verifying the output signals of pyrometers, thermal imaging systems, heat flux ...

By Advanced Energy Industries, Inc. based in Milpitas, CALIFORNIA (USA). from Temperature Measurement Products - Calibration Sources - Low Temp Blackbodies Product line

Scintec - Model BLS900 Series - Large Aperture Scintillometer – Dual-Disk Design

The Scintec BLS900 Large Aperture Scintillometer measures atmospheric turbulence, heat flux and crosswind over path lengths between 100 m (with Path Reduction Aperture, otherwise 500 m) and 6000 m. As part of a meteorological station it can also be used to determine the evapotranspiration over extended areas. ...

By Scintec AG based in Rottenburg, GERMANY. from BLS Scintillometers Product line

Scintec - Model BLS450 Series - Large Aperture Scintillometers

The Scintec BLS450 Large Aperture Scintillometer measures atmospheric turbulence and heat flux over path lengths between 250 m (with Path Reduction Aperture, otherwise 500 m) and 6000 m. As part of a meteorological station it can also be used to determine the evapotranspiration over extended ...

By Scintec AG based in Rottenburg, GERMANY. from BLS Scintillometers Product line

Scintec - Model SLS20 Series - Scintillometer

The Scintec SLS20 Scintillometer measures turbulence, heat flux and momentum flux by purely optical means. In combination with other meteorological sensors the system can determine latent heat flux or ...

By Scintec AG based in Rottenburg, GERMANY. from SLS Scintillometers Product line

Model MF-180 - Heat Flux Sensor

The MF-180 has a high sensitivity, small size suitable to measure low heat flow values. Heatflux sensors can be used in a variety of research applications and manufacturing control processes. EKO has various types of thin substrate heat flux sensorsin the product line-up. A heatflux sensor is a thermopile sensor ...

By EKO Instruments based in San Jose, CALIFORNIA (USA). from Material Analysis - Heat Flux Sensors Product line

Model HF-10S - Heat Flux Sensor

The HF-10S measures heat flux through an object it is mounted to, in W/m2. The HC-10 features a very thin design and has a low thermal resistance. Heat flux sensors can be used in a variety of research applications and manufacturing control processes. EKO has various types of thin substrate heat ...

By EKO Instruments based in San Jose, CALIFORNIA (USA). from Material Analysis - Heat Flux Sensors Product line

Campbell Scientific - Model HFP01-L - Soil Heat Flux Plate

The HFP01, manufactured by Hukseflux, measures soil heat flux, typically for energy-balance or Bowen-ratio flux systems. It outputs a voltage signal that is proportional to the heat flux of the surrounding medium. At least two sensors are required for each site to provide spatial averaging. Sites with ...

By Campbell Scientific, Inc. based in Logan, UTAH (USA). from Soil Heat Flux Sensors Product line

MAE - Model TLW2 - Data Recording Wireless Unit for Heat Flux Meter

Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) to heat flux meter TLOGWLS. Wireless heat flux meters simplify heat flux measurements on building walls due to lack of wires to be passed ...

By M.A.E. Advanced Geophysics Instruments based in Frosolone (IS), ITALY. from Non Destructive Test - Thermal Flow Meters Product line

Kipp & Zonen - Model LAS MkII - Scintillometer

Easy to use and with real-time data directly from the display. The LAS MkII measures atmospheric turbulence and can derive sensible heat fluxes over distances from 100 m to 4.5 km. ...

By OTT HydroMet Solar Energy based in Sterling, VIRGINIA (USA). from Instruments - Meteorology - Ambient Weather Product line

MAE - Model TLW3 - 3 Channels Wireless Unit for Heat Flux Meter

Data recording wireless unit for heat flux meter which allows connection without cables of 2 temperature probes (T1, T2) and a bidirectional heat flux plate (FLUX) to heat flux meter TLOGWLS. Wireless heat flux meters simplify ...

By M.A.E. Advanced Geophysics Instruments based in Frosolone (IS), ITALY. from Non Destructive Test - Thermal Flow Meters Product line

Campbell Scientific - Model HFP01SC-L - Self-Calibrating Soil Heat Flux Plate

The HFP01SC, manufactured by Hukseflux, measures soil heat flux—typically for energy-balance or Bowen-ratio flux systems. It is intended for applications requiring the highest possible degree of measurement accuracy. The HFP01SC outputs a voltage signal that is proportional to the heat flux of the ...

By Campbell Scientific, Inc. based in Logan, UTAH (USA). from Soil Heat Flux Sensors Product line

Scintec - Model SLS20-A Series - Laser Scintillometer with Beam Steerings

The Scintec SLS20-A Scintillometer measures turbulence, heat flux and momentum flux by purely optical means. In combination with other meteorological sensors the system can determine latent heat flux or evaporation. The model SLS20-A has built-in automatic beam steering which permits operation when manual ...

By Scintec AG based in Rottenburg, GERMANY. from SLS Scintillometers Product line

FluxPak - Flux Measurement System

The measurement of fluxes such as sensible heat, momentum, and latent heat, require a fixed set of instruments and software, operating the Eddy Co-variance Method. Applied Technologies, Inc. has put together a complete package of instruments and software that can be configured into a variety of systems to ...

By Applied Technologies, Inc. (ATI) based in Longmont, COLORADO (USA). from Flux Measurement Product line

BSI - Model DATS-III - Fouling Monitor System

The DATS-III Fouling Monitor utilizes the latest in microprocessor technology to simulate condenser / heat exchanger environment on a fluid side stream through a controlled tube section. By matching the tube material, heat flux, and flow rates to an actual process, the DATS-III is able to provide vital ...

By Bridger Scientific Inc. based in Sagamore Beach, MASSACHUSETTS (USA).

MAE - Model TLOGWLS - Wireless Heat Flux Meter for Transmittance Measurements

TLOGWLS heat flux meter for transmittance measurements is characterized by the maximum accuracy in the data acquisition (24 bit resolution) as well as its great versatility and simple operation. Thanks to the use of four probes (for the measure of the contact temperature) and one heat flux plate connected to the ...

By M.A.E. Advanced Geophysics Instruments based in Frosolone (IS), ITALY. from Non Destructive Test - Thermal Flow Meters Product line

BSI - Model CorrDATS - Corrosion & Deposit Monitoring System

Rohrback Cosasco Systems and Bridger Scientific have collaborated to produce the new Rohrback Cosasco Systems CorrDATS integrated corrosion and deposit monitoring system. The main parameters required for control of a water treatment program have been combined into this integrated data logging system which ...

By Bridger Scientific Inc. based in Sagamore Beach, MASSACHUSETTS (USA).

Balcke-Durr - Process Gas Cooler

Balcke-Dürr has experience over many years for different type of process cooling equipment for different chemical application to produce ammonia, methanol, hydrogen plants, ethylene oxide etc. We are able to deliver complex designs with required high quality to ensure reliable ...

By Balcke-Durr GmbH based in Düsseldorf, GERMANY. from Heat Exchangers & Reactors Product line

Ultrasonic Anemometer 3D

with lowest value 2 cm/s. You will get with one sensor the direction and speed or the three components of the air-flow. Additionally you will get accurate values for the fluctuations of the virtual temperature. That makes it very easy to derive turbulent parameters like heat ...

By Theodor Friedrichs & Co. based in Schenefeld, GERMANY. from Ultrasonic Anemometer Product line