Only show results in Virginia? Ok

Heavy Metals Monitoring Applications

  • Laser & Plasma Cutting

    Laser & Plasma Cutting fumes are Unbreathable. Using laser or plasma cutting equipment on either metals or plastics introduces several known carcinogens, such as fused silica and ethyl acrylate, into the air. Occupational Health and Safety organizations recommend reducing personal exposure to the lowest level feasible. Hand held plasma cutting provides metalworkers with a quick and fast way to cut large sheets of metal material. However, plasma and oxy cutting generate a large amount of sparks, slag and fume which can contain different pollutants depending on the type of material being cut. Diversitech's line of downdraft tables incorporating the plasma cutting kit are designed to extinguish the sparks and slag, using heavy duty steel bar grating and a gravel filled baffle tray while the blower pulls away all of the toxic plasma cutting fumes. When considering how to capture and filter the fumes generated from large CNC plasma cutting and laser cutting machines, a large central dust

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Wastewater treatment for the metallurgic industry

    Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very important.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Detection of specific heavy metal content in water

    Detection of heavy metal concentration in water, sea water, environmental waters and pre-treated waste water to low PPB levels using a hand held fluorimeter. Test results acquired within one minute. Technology uses DNAzyme based fluorimetric detection.

    By ANDalyze based in Champaign, ILLINOIS (USA).

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Premium

    Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time.  The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and other substances.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Heavy metal analysis for laboratories

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.

  • Premium

    Metal Precipitation

    When used as part of a wastewater treatment program, Remotox (calcium polysulfide) can effectively reduce and precipitate a wide range of heavy metals. This product has proven effective even when treating chelated and/or complexed metals. Its unique formulation also removes chromates and dichromates without preliminary reduction of the chromium to the trivalent state.

    By Graus Chemicals, LLC based in Glendale, ARIZONA (USA).

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    PTR-MS systems for biological research

    Real-time measurement of plant defense and leaf wounding reactions. Measurement of VOCs in dynamic biological systems with low detection limit and without sample preparation.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Quantitative Analysis of Steel Using Laser Induced Breakdown Spectroscopy (LIBS)

    For steel analysis, LIBS is ideal for rapid QC (quantitative analysis and detection of contaminants) for raw materials in production, and to check the elemental composition of finished products. LIBS also offers the ability to analyze slag samples that can lead to the recovery of precious metals lost in the steel production process.

    By Applied Spectra, Inc. based in Fremont, CALIFORNIA (USA).

  • XRF analysis for lead paint

    Niton analysers facilitate direct surface testing for lead paint, testing for lead in dust wipes from surfaces, testing the lead content of soil in the surrounding area (containment) and the testing of lead content in filters from respirators or volume air samplers for worker/public protection.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Evaporators technology for mining & primary metals industries

    Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove heavy metals, arsenic and other contaminants for safe discharge into sensitive environment.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Premium

    AutoChem - Parallel Synthesis and Screening of Reaction Conditions

    Parallel Synthesis is a technique widely used by researchers to speed the discovery of new compounds and screen for optimal process conditions.  In the pharmaceutical industry, Parallel Synthesis speeds the discovery and development of potential drug candidates.  Early practitioners coined the term `combinatorial chemistry` to describe the synthesis of large libraries with diverse chemical structures screened in mass for potential biological activity.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Process Analytics - Biotech and Hygienic Processes

    METTLER TOLEDO/INGOLD offers a wide range of hygienic and sterilizable/auto- clavable measurement solutions for biotech and hygienic processes. Based on field experiences and expertises in hygienic design for CIP (Cleaning-in-Place) and SIP (Sterilization-in-Place) applications our solutions comply with the most stringent industry requirements. Critical biotech/hygienic applications in pharmaceutical, food and beverage are controlled by measuring pH, conductivity, dissolved oxygen, CO2 and turbidity.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Weight Calibration

    Balances should always be tested with calibrated weights you can rely on and trust. Only calibrated weights are traceable to the International Prototype Kilogram at the BIPM (Bureau International des Poids et Measures) in Paris and ensure accurate weighing results.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Water filtration with UV purification for healthcare

    When hygiene is a matter of life and death and purity is premium, only Waterlogic is good enough. Tap water or traditional hospital water fountains can contain contaminants including pathogens such as Pseudomonas, Legionella, Streptococcus, and E. Coli. Is that safe? You don’t think so and neither do we. When it comes to healthcare, water quality must be of paramount importance.

    By Waterlogic International Ltd based in Basingstoke, UNITED KINGDOM.

  • Premium

    Recycling and processing of shredder heavy fraction

    Since 1991, the bi-directional dense medium separation technology for the recycling of automobile and industrial wastes is being used. For many years a principle client in this regard has been the Group Galloo.  Group Galloo owns currently 50% of the AD REM shares. At first the Galloo staff was not convinced that a carrot separator could compete with the classical dense medium separators on the market at that time. So they set up a trial on +12 mm automobile shredder residue, running half of the test material through a conventional drum and the other half through this modified bi-directional carrot separator.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you