Helium Leak Detection Equipment For Monitoring And Testing Available In Romania
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Siemens DMT is an intrinsically safe and self-contained sensor which can be used to measure the flow, temperature and pressure of fluids flowing in a Sample Conditioning System (SCS) connected to a Siemens Maxum or MicroSAM process Gas Chromatograph (GC). The DMT provides flow rate, temperature and pressure in a single unit. Using a scalable, anti-clogging flow restriction technology with ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive Displacement Blower for Industrial High Vacuum Technology. Vacuum-tight stage for system manufacture with ATEX certification for zone 0. Variable direction of flow vertical and horizontal. Delta p up to 200 mbar possible. With 19 performance levels, the largest series on the market. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
Manufactured by Schoonover Incbased in USA
The GasCheck is a low cost handheld helium leak detector for helium sniffing applications. Technology in the GasCheck includes a thermal conductivity sensor that allows detection of many gases (Model G3 only) including helium, methane, refrigerant and argon. Sensitivity depends on the gas, but the GasCheck is 100x more sensitive than bubble emission testing. Battery operation (4 AA Batteries) ...
-
Manufactured by Perrin GmbHbased in GERMANY
The mounted 2-way ball valves are designed with a 2- or 3-part housing. Spring-loaded seat rings are used for sealing. Due to the absorption of the forces via the bearing journal and the control shaft, the bearing-mounted ball valve not only has lower torques compared to the floating versions, but can also be used with large nominal diameters and pressure ratings. As standard, these are sealing ...
-
Manufactured by OsecoElfabbased in UNITED KINGDOM
Pure-Gard is a welded innovation in sanitary pressure relief, designed for maximum cleanability and ...
-
Manufactured by Löwener Vacuumservice ABbased in SWEDEN
Versatile system used for drying of nuclear reactor fuel containers. The system is also equipped with a Helium leak detector. All parts of the designed are carefully chosen for a long service life in restricted areas. ...
-
Manufactured by CVD Equipment Corporationbased in USA
The BulkGas 1500 Gas Delivery System is representative of SDC’s continuous drive and commitment to providing the industry’s safest and most reliable gas equipment ...
-
Manufactured by CVD Equipment Corporationbased in USA
CiphercoN 1500 Fully Automated Gas Cabinet is representative of SDC’s continuous drive and commitment to providing the industry’s safest and most reliable Ultra-High- Purity (UHP) specialty gas equipment available. Mass customization and modular design concepts of the gas panels, controls architecture and cabinet enclosure have combined to widen the product configuration spectrum and ...
-
Manufactured by HF Jensen A/Sbased in DENMARK
Applications in boreholes with small diameter. 100 % helium leak tested at 6 bar. 100 % temperature ...
-
Manufactured by Coral Coil USAbased in USA
COIL TYPES: Indirect cooled turbo bars, Direct water cooled turbo bars, Direct hydrogen cooled turbo bars. MAIN WALL INSUALTION SYSTEM: Thermo reactive system / resin rich system (B-Stage), Micalastic system or Single bar VPI– A resin poor system in which the insulated bars are heated under vacuum and impregnated in heated resin. The dipped bars are then packed in hydraulic pressed curing ...
-
Manufactured by MMK Engineering Company Pvt. Ltdbased in INDIA
Piston valve was Innovated by replacing the disk and seat of a conventional globe valve with a cylindrical piston and two resilient, replaceable sealing rings. Constant research and development have resulted in sealing rings that provide the piston valve with an extraordinary ability to seal line pressure and prevent leakage to the atmosphere. Independent testing laboratories have subjected ...
-
Manufactured by Perrin GmbHbased in GERMANY
The 2-way ball valves with floating ball are designed with a 2- or 3-piece body. The floating design creates a tightness on the outlet side which increases further with an increase of the pressure on the upstream ...
-
Manufactured by Vaseco Limitedbased in UNITED KINGDOM
Following the decision to invest in expensive equipment, there would be little point in then using sub-standard spares. This is why Vaseco are recognised for only providing high quality spares from major original ...
-
Manufactured by Alloy Valves and Control, Inc. (AVCO)based in USA
AVCO prefabricated CFOS (Cleaned for Oxygen Service) manifold sections are designed to reduce plant assembly costs and time while maintaining the demands for high quality systems. CFOS Manifolds are produced with a main tube made from 316L and can be supplied in lengths up to 24 feet. The main line can vary between ¼” and 12” with the valve lines running between ¼” ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The GasCheck Tesla portable helium leak detector is a highly sensitive helium leak detector designed for effective use within high magnetic fields found around the outside of Magnetic Resonance Imaging (MRI) scanners. GasCheck Tesla portable gas leak detector can be used on an MRI scanner whilst in operation, meaning interruptions to the machinery are avoided. Helium leaks are found quickly ...
-
Manufactured by SVCS Process Innovation s.r.o.based in CZECH REPUBLIC
SVCS takes advantage of many years of experience in manufacturing tailored gas panels and gas systems for various wafer production technologies, as well as various R&D customised panels. SV DELI gas delivery system family offers a high level of technical design, components from the world leaders and a fully automatic control system with independent safety ...
-
Manufactured by General Instruments Consortiumbased in INDIA
General Mineral Insulated Thermocouple Assemblies consist of two, four or six thermocouple wires embedded in compact MgO - mineral insulation, enclosed in a metallic tube The assembly is compact, flexible enough to route, has a high insulation resistance and high thermal conductivity. Mineral insulated thermocouple assemblies are robust in construction and offer good mechanical strength. ...
-
Manufactured by CryoWorks, Inc.based in USA
CryoWorks Vacuum Insulated Transfer Hoses are lightweight, extremely flexible, and thermally-efficient. They provide faster, more consistent liquid delivery with a safe to touch ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you