Helium Leak Detection Equipment For Monitoring And Testing Available In Ohio
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Siemens DMT is an intrinsically safe and self-contained sensor which can be used to measure the flow, temperature and pressure of fluids flowing in a Sample Conditioning System (SCS) connected to a Siemens Maxum or MicroSAM process Gas Chromatograph (GC). The DMT provides flow rate, temperature and pressure in a single unit. Using a scalable, anti-clogging flow restriction technology with ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive Displacement Blower for Industrial High Vacuum Technology. Vacuum-tight stage for system manufacture with ATEX certification for zone 0. Variable direction of flow vertical and horizontal. Delta p up to 200 mbar possible. With 19 performance levels, the largest series on the market. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
Manufactured by NOSHOK, Inc.based in USA
Combines isolating and venting in a single valve, eliminating the need for tubing and fittings. Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation on the bottom. The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The GasCheck handheld helium gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels. Designed for the search and location of gas leaks, the GasCheck handheld helium gas leak detector provides you with effective ...
-
Distributed by Edwards Limitedbased in GERMANY
The nXDS6i is the next generation in completely oil free, dry scroll pumps and replaces the XDS5. nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip ...
-
Manufactured by Kurt J. Lesker Companybased in USA
The E2M0.7 and E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through an Oldham coupling by a totally enclosed fan cooled single phase motor. The pump is well suited for scientific applications such as backing turbomolecular pumps and general laboratory ...
-
Manufactured by INFICONbased in USA
INFICON Protec P3000(XL) Helium Sniffer Leak Detector is specifically designed for full-time sniffing applications in demanding production ...
-
Manufactured by Spectron Gas Control Systems GmbHbased in GERMANY
Metal-to-metal seal to atmosphere using metal diaphragms. Design optimized for low flow restriction and thorough electropolishing of the internal surfaces. All gas-wetted parts made of stainless steel SS 316L, Hastelloy C276 and PCTFE or PVDF respectively. Fully functional even when valve is evacuated. Welded valve stem / diaphragm assembly. No parts in the gas-wetted area exposed to friction or ...
-
Manufactured by General Instruments Consortiumbased in INDIA
The conventional thermocouple is used with an outer protecting tube or thermowell to protect it from aggressive and corrosive process condition. This improves the longevity of the thermocouple. However, response time is poor. To overcome above problem, General has designed MI Thickwall Thermocouple having a thicker wall with relatively larger conductor diameters. This construction enables the ...
-
Manufactured by NOSHOK, Inc.based in USA
Designed for use with differential pressure transmitters in liquid level applications. Available in either single flange or double flange connection for direct installation. 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability. 2020 Series hard seat valves have 10,000 psi pressure rating @ 200 °F. 2120 Series soft seat valves have 6,000 psi pressure rating @ ...
-
Manufactured by Pfeiffer Vacuum GmbHbased in GERMANY
Powerful rotary vane pump with 20 m3/h backing capacity. 4.4 l/s helium pumping speed. 200/240 V operating voltage. European power cable. Operator interface and voice synthesizer in ...
-
Manufactured by Evans Components Inc.based in USA
Evans PW Series valves perform to the highest levels of leak integrity available on the market. All valves and valve assemblies are 100% helium leak tested to ensure reliability and low cost of ...
-
Manufactured by Vaseco Limitedbased in UNITED KINGDOM
We’ve utilised our knowledge and expertise in the field to create the ultimate leak detector package for your requirements. Incorporating the latest technology and highest quality products, our package enables fast set up times and you can be confident that as a single source supplier we are able to offer this to you all at the best possible ...
-
Manufactured by Vaseco Limitedbased in UNITED KINGDOM
Our Bubbler Box calibration skid SK1 is a fully mobile solution meaning calibration of helium leak detectors can be calibrated anywhere ...
-
Distributed by Vac Techniche Ltd.based in USA
LabTechniche’s range of hydro-formed flexible hose assemblies, supplied into the Vacuum, Laboratory, Medical, Food and Pharmaceutical industries, are designed to provide leak tight connections to convey gases under vacuum and positive pressure. In addition, they offer a solution for misalignment, reduce vibration, and absorb thermal expansion. All hoses and fittings are 316L grade and ...
-
Manufactured by Seiler Vakuumtechnik GmbHbased in GERMANY
Two-sided testing, Helium concentration optionally 50 – 100 %, Type-specific tool pickup, Manual fitting, Automatic testing sequence, Optical „Go/No-go“ ...
-
Manufactured by LACO Technologiesbased in USA
A global manufacturer of HVAC Components required a turnkey helium leak test system that incorporated easy loading and unloading of parts, and a cycle time of 2-3 minutes per part. LACO’s team of engineers designed a compact system consisting of a cylindrical chamber mounted in a ruggedized mobile cart, a TITAN VERSA helium leak detector, an ATLAS leak test process controller and a robust ...
-
Manufactured by NOSHOK, Inc.based in USA
Designed for use with differential pressure transmitters incorporating two isolation valves in natural gas applications. Non-rotating stem tip standard on large bore isolation valves. 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability. Soft seat design has 6,000 psi pressure rating @ 200 °F. Features a replaceable Delrin seat, and straight through porting for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you