Helium Monitoring Equipment For Monitoring And Testing Available In Iraq
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Siemens DMT is an intrinsically safe and self-contained sensor which can be used to measure the flow, temperature and pressure of fluids flowing in a Sample Conditioning System (SCS) connected to a Siemens Maxum or MicroSAM process Gas Chromatograph (GC). The DMT provides flow rate, temperature and pressure in a single unit. Using a scalable, anti-clogging flow restriction technology with ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Gain insight into your helium consumption. Helium is one of the most expensive technical gasses in the industry, roughly a 100 times more expensive than compressed air. Pricing of helium is extremely volatile. Current market pricing varies between 5 and 20 Euro/ m3 (3 to 12 USD/100SCF). It is a non-renewable gas, crucial for some industries like medical, electronics and aerospace. Amongst others, ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Specially designed for border security, nuclear power plant control, along with major event safety, the ultra-sensitive SaphyGATE GN is a Gamma-Neutron portal monitor able to detect Special Nuclear Materials in a non-invasive ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous or discontinuous mode permanent gases monitor for laboratory or online. A highly automated system for routine measurement of permanent gases on the range : ppb or ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive Displacement Blower for Industrial High Vacuum Technology. Vacuum-tight stage for system manufacture with ATEX certification for zone 0. Variable direction of flow vertical and horizontal. Delta p up to 200 mbar possible. With 19 performance levels, the largest series on the market. ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The pressure transmitter DMP 331 can be used in all industrial areas when the medium is compatible with stainless steel 1.4404 (316 L) or 1.4435 (316 L). Additional are different elastomer seals as well as a helium tested welded version available. The modulare concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
Manufactured by Schoonover Incbased in USA
The GasCheck is a low cost handheld helium leak detector for helium sniffing applications. Technology in the GasCheck includes a thermal conductivity sensor that allows detection of many gases (Model G3 only) including helium, methane, refrigerant and argon. Sensitivity depends on the gas, but the GasCheck is 100x more sensitive than bubble emission testing. Battery operation (4 AA Batteries) ...
-
Manufactured by Perrin GmbHbased in GERMANY
The mounted 2-way ball valves are designed with a 2- or 3-part housing. Spring-loaded seat rings are used for sealing. Due to the absorption of the forces via the bearing journal and the control shaft, the bearing-mounted ball valve not only has lower torques compared to the floating versions, but can also be used with large nominal diameters and pressure ratings. As standard, these are sealing ...
-
by BCCKbased in USA
Operators with higher concentrations of contamination in gas feed streams have discovered an economical, reliable solution to purify their gas while generating additional revenue from the separated and processed by-products. One particularly profitable by-product, even in small volumes, is helium. Helium is a rare commodity and the high demand for it calls for a premium price. BCCK’s proven ...
-
Manufactured by BEA Institut für Bioenergie GmbHbased in AUSTRIA
5E-CHN22005E Series C/H/N Elemental Analyzer is used to determine carbon, hydrogen, nitrogen content in solid and liquid material, such as biomass, coal, coke, oil, petroleum, fertilizer, plastic, food, hydrocarbons and plant tissue, leaves and tobacco, which is widely applied in power plants, coal mines, metallurgy, chemical industry, commercial inspection, scientific research, food industry, ...
-
Manufactured by OsecoElfabbased in UNITED KINGDOM
Pure-Gard is a welded innovation in sanitary pressure relief, designed for maximum cleanability and ...
-
Manufactured by Stratum Reservoirbased in USA
Measures both grain volume using internal matrix cup for samples and directly pore volume using ext. core holder. Porosimeter have several reference volumes (VI) that can be combined in order to adjust the ref. volume to achieve optimal calibration results for diff. sample ...
-
Manufactured by Horizon Polymer Engineering Pvt. Ltd.based in INDIA
Design, Standard and Features: Interior Valve Bodies As Well As The Stem And Ball Are Individually Lined With PFA Or PVDF/FEP. Ball Is Fully Encapsulated In PFA/FEP. Ceramic Balls Are Also Available Which Are Interchangeable. Anti-Blow Out Stem Assembly For Preventing Stem Blow Out Even When Top Gear Is ...
-
Manufactured by Löwener Vacuumservice ABbased in SWEDEN
Versatile system used for drying of nuclear reactor fuel containers. The system is also equipped with a Helium leak detector. All parts of the designed are carefully chosen for a long service life in restricted areas. ...
-
Manufactured by CVD Equipment Corporationbased in USA
The BulkGas 1500 Gas Delivery System is representative of SDC’s continuous drive and commitment to providing the industry’s safest and most reliable gas equipment ...
-
Manufactured by CVD Equipment Corporationbased in USA
CiphercoN 1500 Fully Automated Gas Cabinet is representative of SDC’s continuous drive and commitment to providing the industry’s safest and most reliable Ultra-High- Purity (UHP) specialty gas equipment available. Mass customization and modular design concepts of the gas panels, controls architecture and cabinet enclosure have combined to widen the product configuration spectrum and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you