Helium Monitoring Equipment For Monitoring And Testing Available In St. Kitts & Nevis
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous or discontinuous mode permanent gases monitor for laboratory or online. A highly automated system for routine measurement of permanent gases on the range : ppb or ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Gain insight into your helium consumption. Helium is one of the most expensive technical gasses in the industry, roughly a 100 times more expensive than compressed air. Pricing of helium is extremely volatile. Current market pricing varies between 5 and 20 Euro/ m3 (3 to 12 USD/100SCF). It is a non-renewable gas, crucial for some industries like medical, electronics and aerospace. Amongst others, ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Specially designed for border security, nuclear power plant control, along with major event safety, the ultra-sensitive SaphyGATE GN is a Gamma-Neutron portal monitor able to detect Special Nuclear Materials in a non-invasive ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Siemens DMT is an intrinsically safe and self-contained sensor which can be used to measure the flow, temperature and pressure of fluids flowing in a Sample Conditioning System (SCS) connected to a Siemens Maxum or MicroSAM process Gas Chromatograph (GC). The DMT provides flow rate, temperature and pressure in a single unit. Using a scalable, anti-clogging flow restriction technology with ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The pressure transmitter DMP 331 can be used in all industrial areas when the medium is compatible with stainless steel 1.4404 (316 L) or 1.4435 (316 L). Additional are different elastomer seals as well as a helium tested welded version available. The modulare concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive Displacement Blower for Industrial High Vacuum Technology. Vacuum-tight stage for system manufacture with ATEX certification for zone 0. Variable direction of flow vertical and horizontal. Delta p up to 200 mbar possible. With 19 performance levels, the largest series on the market. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
-
Manufactured by NOSHOK, Inc.based in USA
Combines isolating and venting in a single valve, eliminating the need for tubing and fittings. Block valve isolates the downstream process fluids, and the bleed valve exhausts upstream fluids enabling instruments to be removed without disturbing the permanent piping installation on the bottom. The 1/4" NPT vent plug is located 90° to the left and may be removed and replaced with exhaust ...
-
Distributed by Edwards Limitedbased in GERMANY
The nXDS6i is the next generation in completely oil free, dry scroll pumps and replaces the XDS5. nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip ...
-
Manufactured by Jelight Company Incbased in USA
The specialized design of this mercury bulb eliminates dangling lead wires because of their location at only one end of the lamp. This feature is ideal for such applications as submerging the lamp into a liquid or inserting the lamp into small apertures. The double-bore has strong isolated spectral lines that are well separated from the others, and the bulbs are free from contaminates which are ...
-
Manufactured by Evans Components Inc.based in USA
Evans PW Series valves perform to the highest levels of leak integrity available on the market. All valves and valve assemblies are 100% helium leak tested to ensure reliability and low cost of ...
-
Manufactured by INFICONbased in USA
INFICON Protec P3000(XL) Helium Sniffer Leak Detector is specifically designed for full-time sniffing applications in demanding production ...
-
Manufactured by General Instruments Consortiumbased in INDIA
The conventional thermocouple is used with an outer protecting tube or thermowell to protect it from aggressive and corrosive process condition. This improves the longevity of the thermocouple. However, response time is poor. To overcome above problem, General has designed MI Thickwall Thermocouple having a thicker wall with relatively larger conductor diameters. This construction enables the ...
-
Manufactured by Pfeiffer Vacuum GmbHbased in GERMANY
Powerful rotary vane pump with 20 m3/h backing capacity. 4.4 l/s helium pumping speed. 200/240 V operating voltage. European power cable. Operator interface and voice synthesizer in ...
-
Manufactured by NOSHOK, Inc.based in USA
Designed for use with differential pressure transmitters in liquid level applications. Available in either single flange or double flange connection for direct installation. 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability. 2020 Series hard seat valves have 10,000 psi pressure rating @ 200 °F. 2120 Series soft seat valves have 6,000 psi pressure rating @ ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The GasCheck handheld helium gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels. Designed for the search and location of gas leaks, the GasCheck handheld helium gas leak detector provides you with effective ...
-
Manufactured by Vaseco Limitedbased in UNITED KINGDOM
We’ve utilised our knowledge and expertise in the field to create the ultimate leak detector package for your requirements. Incorporating the latest technology and highest quality products, our package enables fast set up times and you can be confident that as a single source supplier we are able to offer this to you all at the best possible ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you