Only show results available in Virginia? Ok

Humidity Monitoring Applications

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS group based in Aachen, GERMANY.

  • Moisture Monitoring for Instrument Air & Compressor Systems

    The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Products for Airport Weather Station

    Situation: Do you use a small airport, private landing strip, or small municipal runway? If you’re lucky, you might have a windsock. That’s okay if you’re on site, but inadequate if your flying in.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Prescribed Burning

    A general understanding of the separate and combined effects of several weather elements on fire behavior is needed to plan and execute a good prescribed burn. Because weather and fuel factors interact, an experienced prescribed burner can conduct a successful burn even with one or more factors slightly outside the desired range—as long as they are offset by other factors. Accurate fire weather monitoring of fire danger indices via the RAWS network, providing historical data leading up to a prescribed burn is critical in the planning stages. However, having accurate weather conditions in a micro-climate scale in real time during the execution of a prescribed burn is just as critical. The weather variables most applicable to prescription burns are air temperature, relative humidity, wind direction, wind speed and precipitation. A combination of wind speed, relative humidity, temperature, and solar insulation largely determines fuel condition which in turn affects fire behavior.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for Controlled Atmosphere (CA) storage

    Precise regulation of O2, CO2 and N2 concentrations. A controlled atmosphere is an agricultural storage method in which the oxygen, carbon dioxide and nitrogen concentrations are regulated. The humidity and temperature are also controlled, resulting in a slow loss of quality during prolonged bulk storage of products such as apples, pears, grains, legumes, etc.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Products in Meteorological Weather Station

    Situation: Weather is a fascinating, moving thing that everyone experiences. For most people, weather reports are for the TV news, but taking ones own measurements is far more interesting.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Premium

    Oxygen Permeation Analyzers for Packaging Industry

    Systech Illinois` oxygen permeation analyzers offer reliable and versatile testing for all bottles, packages and films. These instruments provide extremely fast purge down time; accurate readings at the lowest levels and the highest quality sensors in the market. The changeover from wet to dry sample runs is the fastest on offer. Precise control gives a wide sample temperature range of 5° to 50°C and a measured and controlled relative humidity range of 20 to 90% RH.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Products for Industrial Weather Station

    Situation: Process control, worker safety, incident response, environmental temperature, wind loads, and precipitation volume are all situations and conditions that may require real-time, local weather instruments. HVAC in large facilities may require “weather” instruments when a wall thermostat just won’t cut it.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Odor Control

    AgriAir purifiers will rid the air of volatile organic substances that may be associated with indoor growing operations. Our line of air purifiers is designed to remove odors and sanitize the air by destroying contaminants at the source, not masking them. Available in a variety of models that are designed to suit any commercial operation. Large or small-scale grow, AgriAir has a purifier designed to meet your garden’s demands.Indoor cultivation always gives the grower the upper hand. In indoor growing, you have the full control of the environment for your plants. Light, water, nutrients, temperature and humidity can all be controlled. However, you also need to control the odor of plants growing indoors.

    By AgriAir Equipment based in Mukilteo, WASHINGTON (USA).

  • Industrial solutions for energy efficiency in buildings

    Nowadays, the new laws of protection and sustainability, increased energy prices and greater environmental awareness and drive increased largely rational use of energy, not only for end users but also large consumers and systems thereby improving efficiency in buildings.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Gas control equipment for Life Science

    QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. The user can set a CO2 concentration up to 30% vol. CO2. The CO2Control measures the actual concentration and adds CO2 from a CO2 gas container. The NDIR CO2-sensor has an excellent long-term stability, which provides years of stable CO2 measurement. Also the other parts as the sample gas pump, valve and fittings are designed for maintenance-free use over years. Humidity effects are compensated upto 95% rh at 37°C, also temperature effects are automatically corrected upto 50°C. The other way to control gas atmospheres in any life science equipment is to use gas mixing units GMS_2CH ( 2 channels ) or GMS_3CH ( 3 channels ) for N2, O2 and CO2. They can match flowrates up to 80 liters per minute with a concentration range up to 100 Vol% O2 and/or CO2.

    By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

  • Premium

    Indoor Air Quality Monitoring

    Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. CO2 production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks. Excess CO2 levels can lead to tiredness and a lack of concentration and can contribute to the symptoms of Sick Building Syndrome such as headaches, eye, nose and throat irritation, itchy skin and nausea.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you