Humidity Monitoring Services For Monitoring And Testing Available In Ivory Coast
-
Premiumbased in UNITED KINGDOM
One of CERC's principal functions is to make use of new developments in environmental research to develop practical but scientifically advanced environmental software. Since its inception CERC, sometimes with sponsorship from industrial companies and UK government departments, has produced a number of models which tackle issues such as air dispersion of both planned and emergency releases, air ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
From system design to installation, commissioning and validation, Particle Measuring Systems (PMS) can guide you through a cleanroom environmental monitoring systems project from conception to completion. You can rely on our experience managing fully integrated systems worldwide serving both life sciences and microelectronics customers—in a variety of ...
-
Premiumbased in UNITED KINGDOM
With climate change and rapid urbanisation, the influence of the built environment on local temperature and humidity levels is of increasing interest. Policy makers and planners must consider mitigation strategies for urban heat islands that develop during the summer months and make life uncomfortable for residents of cities ...
-
PremiumManufactured by Environics, Inc.based in USA
Calibration of Your Environics System. All Environics systems, with the exception of the Series 7000 Zero Air Generator, are calibrated using a NIST (National Institute of Standards and Technology) recognized and traceable primary flow measurement standard, the Sierra Cal-Bench, Serial Numbers #1010, 1069 or 1089 prior to delivery. ...
-
Manufactured by DRYAIRbased in UNITED KINGDOM
For a variety of reasons many clients only require temporary humidity control. ...
-
Manufactured by DRYAIRbased in UNITED KINGDOM
The founding principles of Dry Air is that support should be available to clients from concept of design, through the full life cycle of their equipment. For after sales support we offer competitive spare parts, technical support via phone, or in person via the various service level agreements we have available. These can be tailored to meet the individual clients needs and budgets. ...
-
Manufactured by Fiatec - Filter & Aerosol Technologie GmbHbased in GERMANY
Besides the evaluation of filtration performance we also run tests regarding basic material properties on media and elements. This includes climate change tests, ageing tests, shelf life, conditioning under extreme temperatures and humidity as well as several stability tests or fogging and odor tests. ...
-
based in CANADA
EcoMetrix has an in-house laboratory where geoscientists complete specialized testing of natural materials and waste products such as: Ore, overburden, waste rock, ...
-
based in USA
Sterling Energy provides expert generation equipment preservation and layup programs compliant with or exceeding manufacturer’s preservation guidelines. We have developed and implemented comprehensive preservation programs for 4,500 MW of power generation equipment including turbines, generators, boilers, and auxiliary ...
-
based in USA
Reliability qualification demonstrates the fitness of a microelectronic product for use in the field and helps our clients better understand the fundamental wear-out mechanisms, detect design marginality combined with parameter drift and determine failure rates due to latent manufacturing ...
-
by Westpak Incbased in USA
Environmental testing is a process of subjecting a test specimen to various temperature and humidity conditions in order to determine the effect of these conditions on the test specimen. Often, this conditioning is conducted prior to other tests such as mechanical or package performance testing in order that the test specimen be exposed to a full range of potentially harmful temperature and ...
-
Manufactured by Particle Technology Limitedbased in UNITED KINGDOM
Particle Technology Ltd houses two of the largest commercial sand and dust testing facilities in Europe. The requirements of all of the major specifications for dust penetration and erosion by sand can be met for both 'swirling' and 'driving' conditions and we have a full Ingress Protection (IP) facility, with the capability of incorporating both dust and water tests. All the listed standards are ...
-
Manufactured by FLEXcon Company, Incbased in USA
Want to be sure your graphic will still look great after two years outdoors? We can conduct accelerated weather testing as well as a variety of other aging and exposure tests. ...
-
Manufactured by Memtronikbased in CANADA
At Memtronik, we assist you throughout the process of developing and manufacturing your control interface, sensors and any other printed electronic ...
-
by TÜV SÜD AGbased in GERMANY
Why is Climatic Testing required? Technical devices and products are often exposed to climatic and mechanical stresses. They must work smoothly despite cold, heat, wetness and bad ...
-
based in USA
PTI currently offers 8 different thermal and humidity chambers, ranging from small chambers to walk-in chambers. They range from 36″ X 36” X 36” to a walk-in chamber of 8’ X 6’ X 7’ and temperatures from -73°C to 177°C. All PTI Chambers can be programmed for different ramp profiles and dwell times. ...
-
by Polygonbased in USA
The use of temporary heating reduces job related risk and liability by effectively keeping all temperature related problems in control. Polygon offers vast knowledge, experience and technical expertise in addressing problems caused by cold temperatures such as losses in productivity and product ...
-
by Westpak Incbased in USA
One of the first test processes often required prior to conducting physical testing on the package, container, or packaging component being evaluated is Environmental Conditioning; this process brings the item to be tested into equilibrium with specific temperature and humidity conditions prior to ...
-
by Westpak Incbased in USA
Environmental conditioning is a process of subjecting a test specimen to various temperature and humidity conditions in order to determine the effect of these conditions on the test specimen. Often this conditioning is conducted prior to other tests such as mechanical or package performance testing in order that the test specimen be exposed to a full range of potentially harmful temperature and ...
-
Manufactured by Rexnord Corporationbased in USA
We have a wide range of accelerated aging test equipment to evaluate products under simulated service conditions. Our capabilities include programmable temperature testing, a sand test/dust test, a fluid immersion test, temperature - humidity testing, non-destructive testing, and spray ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you