Hydrocarbons Monitoring Equipment For Monitoring And Testing Available In Alberta
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Petroleum hydrocarbons analyzer AE-2 is designed for continuous automatic monitoring of content of petroleum hydrocarbons in potable, natural, and waste water. The instrument comprises a sample preparation unit and a fluorescence detector. The sample preparation unit provides metered water feed and switching of the water and reagent flows, control of temperature, mixing and mass-exchange ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s Hydrocarbons sensor utilizes fluorescence measuring principal and provides rapid real-time measurement of hydrocarbons (oil) in water and wastewater. Continuous hydrocarbons monitoring can bring significant value to many applications including drinking water, wastewater and environmental ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for Volatile and Semi Volatile Hydrocarbons measurement in ambient air. The airmoVOC C6C20+ is used to monitor VOCs up to the semi volatile hydrocarbons in industrial site, tropical forest and on site under decontamination. With detection limit as low as 1 ppt for Benzene or Naphthalene the system can measure gaseous PAHs in ambient air in continue up to Fluorene and linear ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process e.g. stack emissions, ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
CH4 and Non Methane Total Hydro Carbon (NMTHC) Monitoring and analysis of Methane and Non-Methane Hydrocarbons by flame ionisation detection (ppm level analysis). The CHROMATHC is an automated isothermal industrial gas chromatograph dedicated to the analysis of volatile organic compounds in air (indoor, outdoor, combustion), industrial hygiene, pure gas like N2/CO2/O2. ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Capable of anlaysing up to 32 compounds from C6-C12 (used in airmozone) or PAMS. The airmoVOC C6-C12 uses a valve with 1 sample trap. It also features a metalic capillary column. Miniaturization, sensitivity, mobility and flexibility are its main ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The CO2-EN Gas Detection Carbon Dioxide Monitor Controller is designed to provide HVAC systems with economical means of controlling outdoor makeup air to maintain indoor air quality and reduce the cost of heating or cooling the building environment. The CO2-EN is used for ambient monitoring in commercial and light industrial environments. Air samples originate at the remote sampling head, which ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring methane and carbon dioxide. It can also be fitted with ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
J.U.M.'s External Non Methane Hydrocarbon Cutter allows the added capability to measure alternately METHANE ONLY or THC with one heated total hydrocarbon analyzer ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting solvent. Since the extract is deposited into a 10 mm quartz ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M. Engineering HFID Model 5-100 is a compact 19" rack mount or table top heated total hydrocarbon analyzer for high accuracy, sensitivity and stability for pressurized samples with conventional sample back pressure ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M OVF-3000 Portable Heated Total Hydrocarbon Analyzer is a light weight, over the shoulder portable heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Your entire C/N/S/X lab in one device: Extensive range of applications without device modification. A single analyzer for solid, liquid, gaseous and LPG samples. Self Check System for unattended operation and reliable results. Vertical and horizontal combustion in one ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. The cans freely scroll ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you