Hydrogen (H2) Monitoring Equipment For Monitoring And Testing Available In Pennsylvania
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG ST BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG ST BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. The innovative drying system ensures the maximum grade of hydrogen purity, ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the working environment of the GC and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.060 and, if the value exceeds the threshold alarm, the Controller deactivates the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG BASIC is able to generate up to 700 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are used. ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Direct-driven blower stage (single and double-stage) for system manufacture for conveying process and cooling gas. Horizontal direction of flow Oil circulation lubrication. Suitable for continuous water injection for cooling and cleaning. Available in 6 sizes for overpressure ranges up to PN 6. Delta p up to 1,500 mbar possible. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our HFID Model H100 is a compact heated FID analyzer for high purity hydrogen applications. The H100 measures low trace total hydrocarbon concentration in Hydrogen. For fastest response and highest accuracy except the pressure regulator all components in contact with sample are housed in a 190 deg Celsius heated oven.. The Model H100 is ideally suited for the detection of very low traces of ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
SurfMoG H2 is the result of the expertise and union of a French company, 45-8 ENERGY, and a Swiss company, SOLEXPERTS. 45-8 ENERGY’s knowledge of subsurface and expertise into industrial gases, coupled with SOLEXPERTS' recognised skills in terms of mechanics and electronic, led to the creation of the most effective IoT tools currently on the market for accurately and continuously monitor ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purity hydrogen generator and an important tool for the incoming H2 of FID, FPD ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An autoGC-trap-FPD for low sulfur quantification. airmo S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulfur compounds with Sulfur Specific Detector. This solution is specific for application where low sensitivity on sulfurs must be reached. This auto GC uses a valve with 1 sample trap, and metallic capillary ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG RACK 19“ 2U PRO is able to generate up to 600cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG RACK 19” 2U BASIC is able to generate up to 600 cc/min of Hydrogen with purity better than 99.9999% and pressure up to 10 bar (145 psi). The HG 2U 19 inch BASIC includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot H2S is a robust H2S Gas Monitor that can measure hydrogen sulfide levels in the air. This H2S gas detector uses electrochemical sensing technology to measure H2S concentration in the air. The industrial hydrogen sulfide monitor uses an electrochemical sensor for real-time monitoring. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG 5U PRO is able to generate 3300 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 5U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 5U PRO ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / 4 dilution ...
-
PremiumManufactured by ENVEAbased in FRANCE
Using a proven flame ionisation detector (FID), the analyzer HC51M measures ambient air hydrocarbons (THC, CH4, nmHC) in the range 0-1000 ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Automated online analysis & monitoring of Sulphur Compounds: H2S / COS / CS2 / SO2 / RSH Chroma S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulphur ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
ShallowMoG: unsaturated and saturated zone, down to approx. 50 m depth is an IoT tool for gas monitoring in the unsaturated and saturated zone down to a depth of approximately 50 metres and has the following features: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you