Hydrogen Sensors Equipment For Monitoring And Testing Available In Minnesota
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the working environment of the GC and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.060 and, if the value exceeds the threshold alarm, the Controller deactivates the ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Stainless steel double-lock conduit. 3 x K-type TC conductors. 3 x EEPROM conductors for digital comms. 4 x conductors for analog probe signals. PTFE fluidic connection for purge gas. 2 x latching / push-pull 10-pin connectors. Rated to 200 deg ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
The Hycal Mini analyser provides rapid, accurate measurement of hydrogen dissolved in molten aluminium and its ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
SurfMoG: unsaturated zone, soil gas up to 1 m depth is an IoT tool for gas monitoring in the unsaturated zone down to a depth of approximately 1 metre with the following features: ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HG MINI is able to generate up to 300 cc/min of Hydrogen with purity better than 99.999% and pressure up to 12 bar (174 psi). The HG MINI includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are involved. The innovative static drying system ensures the maximum grade of hydrogen purity, protects the GC thanks to its unique humidity safe guard. The ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated automatic calibration function using ambient air provides the ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3x lower running cost, reduced degassing cost. Gateway: Profinet, ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multi-gas measuring device with infrared sensors and extended measuring range for hydrogen sulphide. With the Multitec 545, up to five gases can be measured simultaneously. The very high H2S concentrations in wastewater treatment plants and palm oil factories, for example, place special demands on the measuring instrument. With its rugged design and wide H2S measuring range, the Multitec 545 is ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Probes x 2: Measure before and after degasser, Permanently mounted. Station x 1: Cables route to same panel, 2 Hycals in 1 ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Gas leak detector for leak detection in indoor gas installations. The SNOOPER mini is a robust gas leak detector and is suitable for checking accessible gas lines for external leak tightness. Leaks are determined based on detection at connection points, e.g. fittings, flanges, threaded connections and gas regulator fittings The gas concentration is displayed in the ppm range. House lead-ins and ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
The Heart of Our Technology: At the core of our cutting-edge technology lies the remarkable Hycal sensor. This innovative sensor boasts a patented solid-state reference, setting it apart from traditional technologies. The Hycal sensor can measure hydrogen without the need for an external hydrogen ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
ShallowMoG: unsaturated and saturated zone, down to approx. 50 m depth is an IoT tool for gas monitoring in the unsaturated and saturated zone down to a depth of approximately 50 metres and has the following features: ...
-
PremiumManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Operating expense: 3 x lower running cost, reduced degassing cost. Capital expenditure: Less than 50% CapEx, PLC not included. ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
SurfMoG H2 is the result of the expertise and union of a French company, 45-8 ENERGY, and a Swiss company, SOLEXPERTS. 45-8 ENERGY’s knowledge of subsurface and expertise into industrial gases, coupled with SOLEXPERTS' recognised skills in terms of mechanics and electronic, led to the creation of the most effective IoT tools currently on the market for accurately and continuously monitor ...
-
PremiumManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Pinpointing a leakage irrespective of leakage-borne noises and of ambient noises. Short response time and high sensitivity of the hydrogen sensor. Easy and precise pinpointing of leakages. Leakage detection method acknowledged by the dvgw / ...
-
Manufactured by Sea-Bird Scientific - Veraltobased in USA
The sensor is a modular, self-contained package that is easy to install, service, and calibrate. Intended for use as an add-on auxiliary sensor for profiling ...
-
Manufactured by Kane (Canada) Measurement Solutions Ltd.based in CANADA
KANE258 Flue Gas Analyzer with direct CO, O2 & CO sensor protection. KIT configuration includes the IRP-3 printer. Entry level FGA for domestic gas applications, Easy to use rotary dial, Purge pump protection prevents accidental damage to CO sensor, Hydrogen (H 2 ) ready – up to 20% blend. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you