H2S Gas Monitor (Hydrogen Sulfide (H2S) Monitoring) Equipment
-
Manufactured by Pollution Monitors Group (PM)based in UNITED KINGDOM
The Element series of gas monitors has been designed to detect parts per billion (ppb) of toxic gases. The first in the series is our H2S ...
-
Manufactured by VICI Metronics, Inc.based in USA
All monitors include a sensor, instruction booklet, screw driver, and span gas flow cup and ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The Air check Ex H2 Gas Monitoring System is a compact gas monitoring system that’s ideal for continuously monitoring toxic and corrosive gases in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only ...
-
Manufactured by BELIMObased in SWITZERLAND
Carbon monoxide monitor with reduced hydrogen response. Carbon monoxide monitor has a special electrochemical sensor that is immune to the effects of hydrogen. With regular electro-chemical sensors, the hydrogen generated when charging batteries will cause excessive demand for fresh air and false alarms. This sensor reduces heating ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
The H2 Purity & Purge Gas Monitor AK100 has be specifically designed to monitor hydrogen purity in hydrogen cooled generators. It provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot H2S is a robust H2S Gas Monitor that can measure hydrogen sulfide levels in the air. This H2S gas detector uses electrochemical sensing technology to measure H2S concentration in the air. The industrial hydrogen sulfide monitor uses an electrochemical ...
-
Manufactured by Detection Instruments Corp.based in USA
The Acrulog™ H2S Gas Monitor (PPM) gas monitor is a portable data-logger, designed to survive in the harsh environments typically found within the waste water industry. All logged data can then be easily downloaded via Bluetooth® wireless technology. Optional outputs: 4-20mA, RS485, 4G LTE-M or NB-IoT ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other ...
-
Manufactured by PM Aware- GlobeOwl Incbased in CANADA
Emissions Monitoring: PM 1.0 PM 2.5, PM 10 or Gas Monitoring: H2S, NH3, VOC, CO, Ethylene, Mercaptan, Select any Gas to monitor. One per system included. More available on request. Hardware is fully guaranteed and replaced every 3 years at no charge. Multiple Monitoring Units May ...
-
based in UNITED KINGDOM
In the presence of air and moisture, sour gas (H2S) has the aptitude to corrode internal surfaces of various components while developing a hazardous atmosphere that will impact personnel health and safety. Detecting and monitoring H2S gas at an early stage will provide an instantaneous alarm for life-critical ...
-
Manufactured by Otis Instruments, Inc.based in USA
The Otis Instruments Permian II Model OI-792 is a DC powered dual channel Hydrogen Sulfide Gas or Combustible Gas Monitoring system. The Permian II includes 2 Model OI-641 H2S Sensor Assemblies or 2 Model OI-130 LEL Sensor Assemblies, plus the OI-481 Strobe Light Alarm and OI-488 Audio Alarm, along with 25 feet of Sensor cable ...
-
Manufactured by Detection Instruments Corp.based in USA
OdaLog Hydrogen Sulfide Gas Logger technology, the Sycamore CEM provides continuous 4 to 20 milliAmp output with real-time updates every 10 minutes for each point being monitored. The specially outfitted OdaLog(s) designed specifically for this application accurately measure H2S concentrations as low as 5 parts per billion (5 ...
-
Manufactured by Rel-Tek Corporationbased in USA
ToxiBoss is a wall mounted gas sensor with interchangeable sensing heads to cover a wide variety of toxic gas situations. It is approved intrinsically safe for hydrogen (Group B) environments. Its Class I, Div 1 and 2, Group BCD approval means that it may be used in any hazardous gas environment, except acetylene. And, being intrinsically ...
-
Manufactured by Boreal Laser Inc.based in CANADA
GasFinder2-OP: Quantify Emissions from an Open Area Source; Does your next measurement campaign require you to measure and quantify emissions from an open area source? Well look no further, Boreal Laser has an easy-to-use analyzer that can handle the rigours of the field. The GasFinder2-OP can be set-up and collecting data in a manner of minutes. There is no complicated start-up procedure just ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you