H2S Sensor (Hydrogen Sulfide (H2S) Monitoring) Equipment
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the working environment of the GC and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.060 and, if the value ...
-
based in THAILAND
Determination of H2S in water and watery sludges without any reagent need. Determination of Total Inorganic Sulfide (TIS) in wastewater and sludge (after ...
-
Manufactured by SulfiLogger - Unisense A/Sbased in DENMARK
The SulfiLoggerTM X1-1220 sensor continuously measures hydrogen sulfide (H2S) directly in pressurized process water or raw natural ...
-
Manufactured by SulfiLogger - Unisense A/Sbased in DENMARK
The SulfiLogger S1-1020 sensor continuously measures hydrogen sulfide (H2S) directly in untreated wastewater or in the air above ...
-
Manufactured by Consibio Apsbased in DENMARK
Reduce costs associated with corrosion, reporting and avoid odor complaints with Consibio H2S sensor solutions. ...
-
Manufactured by SulfiLogger - Unisense A/Sbased in DENMARK
The SulfiLoggerTM S1-1120 sensor continuously measures hydrogen sulfide (H2S) directly in pressurized wastewater or in ...
-
Manufactured by Daviteq | Dai Viet Controls and Instrumentation Company Ltd.based in VIETNAM
WSSFC-G4F-NH3 is a Sigfox-ready sensor with a built-in advanced gas sensor to measure the concentration of Ammonia NH3 and H2S to help assess odors in the Toilet. With a special design that increases the sensitivity of the sensor, even though it is mounted on the ceiling at a distance of up to 2.6m. The sensor ...
-
Manufactured by SmartCoverbased in USA
H2Scents® uses a specially designed sensor to enable a SmartCover system to reliably measure real-time H2S levels over extended periods of time. The technology can be used in a range of industrial sites including: refineries, oil & gas production, chemical manufacturing, and food ...
-
Manufactured by Zhengzhou Winsen Electronics Technology Co., Ltd.based in CHINA
ZE03 is a general-purpose and high-performance electrochemical module. It uses three electrodes, electrochemical gas sensor and high-performance micro-processor. By installing different gas sensor, the module could detect relevant gas. It is with built-in temperature sensor to make temperature compensation, which makes it could detect the ...
-
Manufactured by SGX Sensortechbased in SWITZERLAND
BLD1 is a Battery Failure Detection sensor that measures H2 concentration when different battery leakage occur through CAN communication. The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode. BLD1 solution allow Battery Management System (BMS) to monitor the safe operation of the ...
-
Manufactured by Euro-Gas Management Services Ltdbased in UNITED KINGDOM
The next generation of OEM gas sensors from Sixth Sense. Available as single sensors, in combination with a 4-20mA transmitter or as a complete housed ...
-
Manufactured by SGX Sensortechbased in SWITZERLAND
BLD2 is a Battery Failure Detection sensor that measures H2 concentration when different battery leakage occur through CAN communication. The module has to be placed in the battery enclosure allowing to sense H2 gas generated during a failure mode. BLD2 solution allow Battery Management System (BMS) to monitor the safe operation of the ...
-
Manufactured by Euro-Gas Management Services Ltdbased in UNITED KINGDOM
Measuring Principle: Amperometric, 3-electrode sensor. Detectable Gases: Hydrogen H2. Standard Range: 0 –20,000 ppm. Lower Detectable Limit (LDL): 100 ppm. Maximum Range: 40,000 ppm. LEL: 40,000 ppm. Long Term Sensitivity Drift: < 10% / year. Expected Operating Life: 5 years. Temperature Range: -20oC –+80oC. Humidity Range ...
-
Manufactured by Zhengzhou Winsen Electronics Technology Co., Ltd.based in CHINA
Winsen Electronics, as a professional gas sensor manufacturer, produce hydrogen sensor, industrial H2 sensor, using fuel cell/ electrochemical working principle. ME4-H2 hydrogen sulfide gas sensor is constant potential electrolysis type. Oxidation-reduction reaction with hydrogen and oxygen take ...
-
Manufactured by AMT Analysenmeßtechnik GmbHbased in GERMANY
The shallow water sensor for depths of up to 100 m consists of a pre-amplifier covered by a titanium housing, a sensitive tip covered by a titanium protection cage and a SUBCONN BH4M connector (Microseries on request). This complete sensor has been developed for the external interfacing to CTD probe systems. An additional sensor for ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
to the presence of toxic, anoxic and explosive gases in the ambiant air. Small size, ease of installation and use are the main strengths of the plant. Used with the OLCT 10N O2 and CO2 digital sensor series or any other O2, CO2, CH4, GPL and H2 analog sensor, the MX 16 guarantees you a solution that complies with French and European ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot H2S is a robust H2S Gas Monitor that can measure hydrogen sulfide levels in the air. This H2S gas detector uses electrochemical sensing technology to measure H2S concentration in the air. The industrial hydrogen sulfide monitor uses an electrochemical sensor for real-time monitoring. This ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you