Hydrophones Equipment For Monitoring And Testing Available In New Zealand
-
ShowcaseManufactured by Onda Corporationbased in USA
The HM Series membrane hydrophones are designed for measuring pulsed ultrasound fields. Their extremely flat sensitivity results in the best reproduction of acoustic waveforms. Version A is the traditional hydrophone configuration, and a more rugged version B prevents membrane vibration during scanning motion. Version A is recommended for high power ultrasound work, where the absorption of energy ...
-
PremiumManufactured by Onda Corporationbased in USA
A broad mix of preamplifiers are offered to support your application. There are several submersible preamplifier models offered: AH-2010, AH-2020, and AG-2010. The ATH-2000 in-line attenuator is also available to provide a larger dynamic range. Finally, there are a variety of hydrophone mounts, adapters and cables available to provide best access to the measurement working area. ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620LF Bubble Gun uses Low-Frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate sediments. Low power requirements and small sub-system component size make this a valuable tool for any survey ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-620 ORD Bubble Gun systems use low-frequency acoustic signals to provide superior signal penetration vertically through coarse sand, gravel tills, and other difficult-to-penetrate ...
-
PremiumManufactured by Onda Corporationbased in USA
The AIMS III offers the right balance between versatility and easy-to-use operations to meet the most advanced requirements in R&D characterization, regulatory testing, and production QC. The system is commonly used to characterize and validate transducer designs. Features such as the 5 axis motion, various firing/measuring orientations, and real-time plotting make it the tool of choice to ...
-
PremiumManufactured by Onda Corporationbased in USA
The HNP Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. While they have lower sensitivity than the HNC series, these hydrophones have a flatter response and better ...
-
PremiumManufactured by Onda Corporationbased in USA
Onda develops and manufactures innovative OEM cavitation sensors for integration into ultrasonic cleaning systems to continuously or routinely monitor the acoustic stability. The integrated sensor technology leverages from extensive experience developing and manufacturing hydrophones used for various industrial and medical ...
-
PremiumManufactured by Onda Corporationbased in USA
In conjunction with the family of Onda hydrophones, the ATH-2000 increases the preamp large signal handling by 20 dB to accommodate high intensity applications such as HITU. Its in-line "cable-free" configuration allows fully submersible measurements while eliminating the risk of cable resonance and scope impedance mismatches. The ATH-2000 is compatible with all AH-20x0 and AG-20x0 series ...
-
Premiumbased in NETHERLANDS
The Acoustic deterrent produces underwater sound, in order to deter fish from potentially hazardous areas, such as inlets for cooling water of industrial facilities. The required frequency is tailored to local fish ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
A permanently installed leak monitoring system for trunk mains that is both very sensitive (using correlating hydrophone sensors) and at the same time able to work independently for at least 5 years, using solar power for its data gateways. The data is sent to the GUTERMANN CLOUD allowing utilities to pinpoint leaks and investigate them ...
-
PremiumManufactured by Onda Corporationbased in USA
The HCT hydrophone with MCT-1200 Digital Pressure Meter is a trustworthy instrument to characterize and monitor the relative acoustic cavitation in ultrasonic cleaning systems. Its unique single point sensing design allows localized measurements to generate true 3-cimensional acoustic maps of the cleaning ...
-
PremiumManufactured by Onda Corporationbased in USA
The CTS Scanner enables hydrophone mapping to be done automatically, using the HCT hydrophone. The scanner is customized to mount to substrate carriers, eliminating the need for positioning alignment. Because the shaft diameter of the HCT hydrophone is only ~3 mm, 2D acoustic plots can be acquired in “loaded” configurations to simulate actual conditions in the cleaning process (e.g., ...
-
PremiumManufactured by Onda Corporationbased in USA
The MCT-2000 combines the power of a high speed digitizer, spectrum analyzer, and advanced microprocessor to produce an acoustic pressure spectrum. Different components in the spectrum are analyzed to quantify the fundamental frequency and pressure from the direct field, stable cavitation, and transient cavitation. Specifically, the pressure within the fundamental frequency peak represent the ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
Powerful high-end touchscreen correlator designed specifically to find leaks on large diameter pipes over long distances – intelligent, non-intrusive and user-friendly. This correlator is currently the most advanced correlator in the ...
-
PremiumManufactured by Onda Corporationbased in USA
The HGL hydrophone has been established as a workhorse for diagnostic level measurements, providing the best mix of frequency response, reflection profile, and aperture size. The HGL Series hydrophones were designed to meet or exceed recommendations of section 3.3.2 of the AIUM Acoustic Output Measurement Standard (May 1998). They have an exceptionally flat sensitivity in a small and sturdy ...
-
PremiumManufactured by Onda Corporationbased in USA
The HCT hydrophone offers a reliable solution to characterize and monitor the acoustic properties of cavitation vessels, like ultrasonic cleaners. Its unique single point sensing design allows measurements with high spatial resolution to offer true 3-dimensional mapping of the cleaning tank. The rugged construction allows routine mapping of the acoustic pressure and ultimately determination of ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The ULF Compact Sub-Bottom Profiler is ideal for applications that require high resolution CHIRP sub- bottom images along with deeper penetration in difficult sediments such as hard-packed ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The BPA-622 Dual Array is configured with two transducer arrays (low and high frequencies) and an integrated hydrophone array. The combined transmit and receive beam pattern of the BPA-622 is 80 in the forward and aft direction and 32 athwart for the low frequency array, and 120 beam in the forward and aft directions and a narrow, 9 beam athwart for the high frequency array. ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
The AquaScan 610 is the world’s first cordless leak noise correlator and provides highly accurate and error-free leak pinpointing. The combination of high performance, elegant design, compact size and advanced features make this the most popular leak noise correlator available. The AquaScan 610 is highly accurate and extremely portable. It is designed to withstand daily use, rain or shine, ...
-
PremiumManufactured by Onda Corporationbased in USA
The HFO-690 is the latest generation optical fiber hydrophone designed to uniquely support high intensity fields for applications such as HIFU, providing both acoustic pressure and temperature measurements simultaneously. Whereas traditional piezoelectric hydrophones were susceptible to damage, the HFO can withstand acoustic pressures up to 500 MPa. Furthermore, the HFO system was designed to be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you